Optimal design of a novel tuned mass-damper–inerter (TMDI) passive vibration control configuration for stochastically support-excited structural systems

Frahm H. Device for damping vibrations of bodies. U.S. patent No. 989958; 1911.

Ormondroyd, 1928, The theory of the dynamic vibration absorber, J Appl Mech, 50, 9

Den Hartog, 1956

Brock, 1946, A note on the damped vibration absorber, J Appl Mech, 13, A-284, 10.1115/1.4009588

Krenk, 2005, Frequency analysis of the tuned mass damper, J Appl Mech ASME, 72, 936, 10.1115/1.2062867

Nishihara, 2002, Closed-form solutions to the exact optimizations of dynamic vibration absorbers (minimizations of the maximum amplitude magnification factors, J Vib Acoust, 124, 576, 10.1115/1.1500335

Liu, 2005, The damped dynamic vibration absorbers: revisited and new result, J Sound Vib, 284, 1181, 10.1016/j.jsv.2004.08.002

Cheung, 2011, H-infinity optimization of a variant design of the dynamic vibration absorber-revisited and new results, J Sound Vib, 330, 3901, 10.1016/j.jsv.2011.03.027

Ayorinde, 1980, Minimizing structural vibrations with absorbers, Earthq Eng Struct Dyn, 8, 219, 10.1002/eqe.4290080303

Warburton, 1982, Optimum absorber parameters for various combinations of response and excitation parameters, Earthq Eng Struct Dyn, 10, 381, 10.1002/eqe.4290100304

Asami, 2002, Analytical solutions to H∞ and H2 optimization of dynamic vibration absorber attached to damped linear systems, 124, 284

Bakre, 2005, Optimum parameters of tuned mass damper for damped main system, Struct Contr Health Monit, 14, 448, 10.1002/stc.166

Hoang, 2008, Optimal tuned mass damper for seismic applications and practical design formulas, Eng Struct, 30, 707, 10.1016/j.engstruct.2007.05.007

Leung, 2009, Particle swarm optimization of tuned mass dampers, Eng Struct, 31, 715, 10.1016/j.engstruct.2008.11.017

Salvi J, Rizzi E. Minimax optimization of tuned mass dampers under seismic excitation. In: Proceedings of the International Conference on Structural Dynamics. Eurodyn 8; 2011, p. 1892–99.

Ghosh, 2005, A closed-form optimal tuning criterion for TMD in damped structures, Struct Contr Health Monit, 14, 681, 10.1002/stc.176

Krenk, 2008, Tuned mass absorbers on damped structures under random load, Probab Eng Mech, 23, 408, 10.1016/j.probengmech.2007.04.004

Sadek, 1997, A method of estimating the parameters of tuned mass dampers for seismic applications, Earthq Eng Struct Dyn, 26, 617, 10.1002/(SICI)1096-9845(199706)26:6<617::AID-EQE664>3.0.CO;2-Z

Rana, 1998, Parametric study and simplified design of tuned mass dampers, Eng Struct, 20-3, 193, 10.1016/S0141-0296(97)00078-3

Moutinho, 2012, An alternative methodology for designing tuned mass dampers to reduce seismic vibrations in building structures, Earthq Eng Struct Dyn, 41, 2059, 10.1002/eqe.2174

De Angelis, 2012, Dynamic response and optimal design of structures with large mass ratio TMD, Earthq Eng Struct Dyn, 41, 41, 10.1002/eqe.1117

Hoang, 2005, Design of multiple tuned mass dampers by using a numerical optimizer, Earthq Eng Struct Dyn, 34, 125, 10.1002/eqe.413

Lee, 2006, Optimal design theories and applications of tuned mass dampers, Eng Struct, 28, 43, 10.1016/j.engstruct.2005.06.023

Rudinger, 2006, Optimal vibration absorber with nonlinear viscous power law damping and white noise excitation, 132, 46

Ricciardelli, 1999, Tuned vibration absorbers with dry friction damping, Earthq Eng Struct Dyn, 28, 707, 10.1002/(SICI)1096-9845(199907)28:7<707::AID-EQE836>3.0.CO;2-C

Smith, 2002, Synthesis of mechanical networks: The Inerter, IEEE Trans Autom Contr, 47-10, 1648, 10.1109/TAC.2002.803532

Papageorgiou C, Smith MC. Laboratory experimental testing of inerters. In: Proceedings of the IEEE conference on decision and control. vol. 44; 2005, p. 3351–56.

Chuan, 2011, Vibration suppression using two terminal flywheel. Part I: modeling and characterization, J Vib Contr, 18-8, 1096

Evangelou S, Limebeer DJN, Sharp RS, Smith MC. Steering compensation for high-performance motorcycles. In: Proceedings of the IEEE conference on decision and control. vol. 43; 2004, p. 749–54.

Chuan, 2011, Vibration suppression using two terminal flywheel. Part II: application to vehicle passive suspension, J Vib Contr, 18-8, 1353

Wang FC, Chen CW, Liao MK, Hong MF. Performance analyses of building suspension control with inerters. In: Proceedings of the IEEE conference on decision and control. vol. 46; 2007, p. 3786–91.

Wang, 2010, Building Suspensions with Inerters, Proc Inst Mech Eng C: J Mech Eng Sci, 224, 1605, 10.1243/09544062JMES1909

Lazar IF, Wagg DJ, Nield SA. An inerter vibration isolation system for the control of seismically excited structures. In: Proceedings of the international conference on urban earthquake engineering; 2013.

Wong, 2008, Optimal design of a damped dynamic vibration absorber for vibration control of structure excited by ground motion, Eng Struct, 30, 282, 10.1016/j.engstruct.2007.03.007

Roberts, 2003

Hixson, 1961, Mechanical impedance and mobility

CEN. Eurocode 8: design of structures for earthquake resistance – part 1: general rules, seismic actions and rules for buildings. EN 1998-1, 2004. Brussels: Comité Européen de Normalisation; 2004.

Giaralis, 2010, Effective linear damping and stiffness coefficients of nonlinear systems for design spectrum based analysis, Soil Dyn Earthq Eng, 30, 798, 10.1016/j.soildyn.2010.01.012