Optimal capacity design of eccentrically braced steel frameworks using nonlinear response history analysis

NRCC. National building code of Canada 2010. Ottawa (Ontario, Canada): National Research Council of Canada; 2010. Engelhardt, 1989, On design of eccentrically braced frames, Earthq Spectra, 5, 495, 10.1193/1.1585537 Tremblay, 2003, Achieving a stable inelastic seismic response for multi-story concentrically braced steel frames, Eng J, 40, 111 CSA. CAN/CSA-S16-09 design of steel structures. Mississauga (Ontario, Canada): Canadian Standards Association; 2009. FEMA-273. NEHRP guideline for the seismic rehabilitation of buildings. Washington (DC, USA): Building Seismic Safety Council, Federal Emergency Management Agency; 1997. FEMA-450. NEHRP recommended provisions for seismic regulations for new buildings and other structures, part 1 – provisions. Washington (DC, USA): Building Seismic Safety Council, Federal Emergency Management Agency; 2004. Foley, 2007, Probabilistic performance-based optimal design of steel moment-resisting frames, I: formulation, J Struct Eng, 133, 757, 10.1061/(ASCE)0733-9445(2007)133:6(757) Gong, 2012, Energy-based design optimization of steel building frameworks using nonlinear response history analysis, J Constr Steel Res, 68, 43, 10.1016/j.jcsr.2011.07.002 Xu, 2006, Seismic design optimization of steel building frameworks, J Struct Eng, 132, 277, 10.1061/(ASCE)0733-9445(2006)132:2(277) Grierson, 2006, Optimal performance-based seismic design using modal pushover analysis, J Earthq Eng, 10, 73, 10.1080/13632460609350588 Gong, 2005, Optimal stiffness distribution of steel moment frames under extreme earthquake loading, Adv Struct Eng, 8, 573, 10.1260/136943305776318428 Leger, 1992, Seismic-energy dissipation in MDOF structures, J Struct Eng, 118, 1251, 10.1061/(ASCE)0733-9445(1992)118:5(1251) Uang, 1990, Evaluation of seismic energy in structures, Earthq Struct Dynam, 19, 77, 10.1002/eqe.4290190108 ASCE. Seismic rehabilitation of existing buildings, ASCE/SEI 41/06 standard. Reston (VA): American Society of Civil Engineers; 2007. Goldberg, 1989 The MathWorks, Inc. MATLAB the language of technical computing, version 7.8; 2009. <http://www.mathworks.com>. Gong, 2006, Sensitivity analysis of steel moment frames accounting for geometric and material nonlinearity, Comput Struct, 84, 462, 10.1016/j.compstruc.2005.10.005 Gong, 2005, Performance-based design sensitivity analysis of steel moment frames under earthquake loading, Int J Numer Meth Eng, 63, 1229, 10.1002/nme.1312 Deb, 2001 CISC. Handbook of steel construction. 10th ed. Toronto (Ontario, Canada): Canadian Institute of Steel Construction; 2010. PEER. Pacific Earthquake Engineering Research Center; 2008. <http://www.peer.berkeley.edu>. Mansour, 2011, Experimental validation of replaceable shear links for eccentrically-braced steel frames, J Struct Eng, 137, 1141, 10.1061/(ASCE)ST.1943-541X.0000350 OpenSees. Open system for earthquake engineering. Berkeley (California): Pacific Earthquake Engineering Research Center; 2008. <http://opensees.berkeley.edu>. Ramadan, 1995, Analytical model for shear-link behavior, J Struct Eng, 121, 1574, 10.1061/(ASCE)0733-9445(1995)121:11(1574) Richards, 2006, Testing protocol for short links in eccentrically-braced frames, J Struct Eng, 132, 1183, 10.1061/(ASCE)0733-9445(2006)132:8(1183) Kasai, 1986, General behavior of WF steel shear link beams, J Struct Eng, 112, 362, 10.1061/(ASCE)0733-9445(1986)112:2(362) Filippou, 2004, Methods of analysis for earthquake-resistant structures Lamarche, 2011, Seismically induced cyclic buckling of steel columns including residual-stress and strain-rate effects, J Constr Steel Res, 67, 1401, 10.1016/j.jcsr.2010.10.008 CSA. CAN/CSA-G40.21-04, Structural quality steel. Toronto (Ontario) Canadian Standards Association; 2004. Ricles, 1994, Inelastic link element for EBF seismic analysis, J Struct Eng, 120, 441, 10.1061/(ASCE)0733-9445(1994)120:2(441) Koboevic, 1997, Design and seismic response of shear critical eccentrically braced frames, Can J Civil Eng, 24, 761, 10.1139/l97-016 Xue Y. Capacity design optimization of steel building frameworks using nonlinear time-history analysis. A thesis presented to the University of Waterloo in fulfillment of the thesis requirement for the degree of Doctor of Philosophy in Civil Engineering. University of Waterloo, Ontario, Canada; 2012.