Optimal Design of a Chemical-Technological Complex for Coprocessing Cracking and Pyrolysis Gases
Tóm tắt
This paper completes our work on calculation of a chemical-technological complex for coprocessing cracking and pyrolysis gases on the basis of a method developed for optimal design of a chemical-technological complex (CTC) with progressive fulfilment of steps aimed at optimizing the entire complex with consideration of the mutual influence of all its processes. Using the mathematical model of the entire CTC with complete kinetic models of all the selected processes as a basis, its optimization was performed and the optimal regimes with a maximum production capacity for all the target products were selected for these processes. Advisable routes of the motion of byproducts were selected. The resulting closed flowsheet of the chemical-technological complex with notations of all inlet and outlet flows and established couplings of material and recycled flows between all the reactor elements was presented. Using the complete mathematical model and the selected economic criterion and optimization method as a basis, the chemical-technological complex was subjected to global optimization and, as a consequence, the optimally consistent material flows of the entire complex were determined with the resulting maximization of its rate-of-return, i.e., an appreciable increase in the economic efficiency of CTC operation.
Tài liệu tham khảo
Aliev, A.M., Safarov, A.R., and Guseinova, A.M., Calculation of ethylene region of chemical technological complex for processing of cracking and pyrolysis gases, Theor. Found. Chem. Eng., 2017, vol. 51, no. 4, pp. 404–417. https://doi.org/10.1134/S0040579517040169
Aliev, A.M., Safarov, A.R., and Guseynova, A.M., Full calculation of a chemical-technological complex for processing of cracking and pyrolysis gases based on the kinetic models of the processes, Theor. Found. Chem. Eng., 2017, vol. 51, no. 5, pp. 716–728. https:// doi.org/10.1134/S0040579517050256
Ostrovsky, G.M., Volin, Yu.M., and Ziyatdinov, N.N., Optimizatsiya v khimicheskoi tekhnologii (Optimization in Chemical Engineering), Kazan: Fen, 2005.
Nagiev, M.F., The Theory of Recycle Processes in Chemical Engineering, International Series of Monographs on Chemical Engineering, vol. 3, Oxford: Pergamon, 1964.
Shakhtakhtinskii, T.N., Bakhmanov, M.F., and Kelbaliyev, G.I., Metody optimizatsii protsessov khimicheskoi tekhnologii s programmami dlya EVM (Methods for Optimization of Chemical Engineering Processes Using Computer Programs), Baku: ELM, 1985.
Himmelblau, D.M. and Riggs, J.B., Basic Principles and Calculations in Chemical Engineering, Prentice Hall International Series in the Physical and Chemical Engineering Sciences, Upper Saddle River, N.J.: Prentice Hall, 2012, 8th ed.
Aliev, A.M., Guseinova, A.M., Mirdzhafarova, T.M., Movsumova, A.A., Shakhtakhtinskii, T.M., and Vorozheikin, A.P., Modeling and optimization of industrial processes with the variable activity of a fluidized-bed catalyst, Teor. Osn. Khim. Tekhnol., 1988, vol. 22, p. 838.
Hicks, T.G. and Chopey, N.P., Handbook of Chemical Engineering Calculations, New York: McGraw-Hill, 2012, 4th ed.
Peters, M.S. and Timmerhaus, K.D., Plant Design and Economics for Chemical Engineers, New York: McGraw-Hill, 1991, 4th ed.
Rathore, M.M. and Kapuno, R.R.A., Jr., Engineering Heat Transfer, Sudbury, Mass.: Jones & Bartlett Learning, 2010, 2nd ed.