Operation analysis, response and performance evaluation of a pulsating heat pipe for low temperature heat recovery

Shittu, 2020, Experimental study and exergy analysis of photovoltaic-thermoelectric with flat plate micro-channel heat pipe, Energy Convers Manage, 207, 10.1016/j.enconman.2020.112515

Torresin, 2017, Double condenser pulsating heat pipe cooler, Appl Therm Eng, 126, 1051, 10.1016/j.applthermaleng.2017.02.066

Liao, 2016, Thermal analysis of a heat pipe solar central receiver for concentrated solar power tower, Appl Therm Eng, 102, 952, 10.1016/j.applthermaleng.2016.04.043

Yang, 2016, Experimental investigate on thermal properties of a novel high temperature flat heat pipe receiver in solar power tower plant, Appl Therm Eng, 109, 610, 10.1016/j.applthermaleng.2016.07.075

Huang, 2019, Design of fins with a grooved heat pipe for dissipation of heat from high-powered automotive LED headlights, Energy Convers Manage, 180, 550, 10.1016/j.enconman.2018.11.021

Bahmanabadi, 2020, Experimental examination of utilizing novel radially grooved surfaces in the evaporator of a thermosyphon heat pipe, Appl Therm Eng, 169, 10.1016/j.applthermaleng.2020.114975

Shafieian, 2019, Strategies to improve the thermal performance of heat pipe solar collectors in solar systems: a review, Energy Convers Manage, 183, 307, 10.1016/j.enconman.2018.12.115

Jo, 2019, Experimental investigations of heat transfer mechanisms of a pulsating heat pipe, Energy Convers Manage, 181, 331, 10.1016/j.enconman.2018.12.027

Jafari, 2020, Phase change heat transfer characteristics of an additively manufactured wick for heat pipe applications, Appl Therm Eng, 168, 10.1016/j.applthermaleng.2019.114890

Sun, 2017, Performance of a thermoelectric cooling system integrated with a gravity-assisted heat pipe for cooling electronics, Appl Therm Eng, 116, 433, 10.1016/j.applthermaleng.2016.12.094

Zhou, 2016, Development and tests of loop heat pipe with multi-layer metal foams as wick structure, Appl Therm Eng, 94, 324, 10.1016/j.applthermaleng.2015.10.085

Zhou, 2019, A novel ultra-thin flattened heat pipe with biporous spiral woven mesh wick for cooling electronic devices, Energy Convers Manage, 180, 769, 10.1016/j.enconman.2018.11.031

Liu, 2020, Application of an anti-gravity oscillating heat pipe on enhancement of waste heat recovery, Energy Convers Manage, 205, 10.1016/j.enconman.2019.112404

Faghri, 2012, Review and advances in heat pipe science and technology, J Heat Transfer, 134, 10.1115/1.4007407

Noh, 2020, Numerical simulation of pulsating heat pipes: Parametric investigation and thermal optimization, Energy Convers Manage, 203, 10.1016/j.enconman.2019.112237

Nazari, 2018, Experimental investigation of graphene oxide nanofluid on heat transfer enhancement of pulsating heat pipe, Int Commun Heat Mass Transfer, 91, 90, 10.1016/j.icheatmasstransfer.2017.12.006

Wu, 2016, Effect of C60 nanofluid on the thermal performance of a flat-plate pulsating heat pipe, Int J Heat Mass Transfer, 100, 892, 10.1016/j.ijheatmasstransfer.2016.05.008

Tanshen, 2013, Effect of functionalized MWCNTs/water nanofluids on thermal resistance and pressure fluctuation characteristics in oscillating heat pipe, Int Commun Heat Mass Transfer, 48, 93, 10.1016/j.icheatmasstransfer.2013.08.011

Goshayeshi, 2016, Particle size and type effects on heat transfer enhancement of Ferro-nanofluids in a pulsating heat pipe, Powder Technol, 301, 1218, 10.1016/j.powtec.2016.08.007

Jafarmadar, 2016, Thermal analysis and entropy generation of pulsating heat pipes using nanofluids, Appl Therm Eng, 103, 356, 10.1016/j.applthermaleng.2016.03.032

Kudin, 2008, Raman spectra of graphite oxide and functionalized graphene sheets, Nano Lett, 8, 36, 10.1021/nl071822y

Wang, 2017, Preparation of high antistatic HDPE/polyaniline encapsulated graphene nanoplatelet composites by solution blending, RSC Adv, 7, 2796, 10.1039/C6RA26458A

Sadri, 2017, A novel, eco-friendly technique for covalent functionalization of graphene nanoplatelets and the potential of their nanofluids for heat transfer applications, Chem Phys Lett, 675, 92, 10.1016/j.cplett.2017.02.077

Sadri, 2017, Experimental study on thermo-physical and rheological properties of stable and green reduced graphene oxide nanofluids: hydrothermal assisted technique, J Dispersion Sci Technol, 38, 1302, 10.1080/01932691.2016.1234387

Alarifi, 2019, On the rheological properties of MWCNT-TiO2/oil hybrid nanofluid: an experimental investigation on the effects of shear rate, temperature, and solid concentration of nanoparticles, Powder Technol, 355, 157, 10.1016/j.powtec.2019.07.039

Akram, 2019, An experimental investigation on the performance of a flat-plate solar collector using eco-friendly treated graphene nanoplatelets–water nanofluids, J Therm Anal Calorim, 138, 609, 10.1007/s10973-019-08153-4

Kline SJ. The purposes of uncertainty analysis; 1985.

Sadri, 2017, Study of environmentally friendly and facile functionalization of graphene nanoplatelet and its application in convective heat transfer, Energy Convers Manage, 150, 26, 10.1016/j.enconman.2017.07.036

Jang, 2004, Role of Brownian motion in the enhanced thermal conductivity of nanofluids, Appl Phys Lett, 84, 4316, 10.1063/1.1756684

Malvandi, 2014, Brownian motion and thermophoresis effects on slip flow of alumina/water nanofluid inside a circular microchannel in the presence of a magnetic field, Int J Therm Sci, 84, 196, 10.1016/j.ijthermalsci.2014.05.013

Asadi, 2018, A guideline towards easing the decision-making process in selecting an effective nanofluid as a heat transfer fluid, Energy Convers Manage, 175, 1, 10.1016/j.enconman.2018.08.101

Asadi, 2019, Recent advances in preparation methods and thermophysical properties of oil-based nanofluids: a state-of-the-art review, Powder Technol, 352, 209, 10.1016/j.powtec.2019.04.054

Asadi, 2019, Effect of sonication characteristics on stability, thermophysical properties, and heat transfer of nanofluids: a comprehensive review, Ultrason Sonochem, 58, 10.1016/j.ultsonch.2019.104701

Lyu, 2020, on the thermal performance of a fractal microchannel subjected to water and kerosene carbon nanotube nanofluid, Sci Rep, 10, 1, 10.1038/s41598-020-64142-w

Myers, 2016

Yanhui, 2009, Multi-objective preform optimization using RSM, Rare Met Mater Eng, 38, 1019

Barua, 2013, Effect of filling ratio on heat transfer characteristics and performance of a closed loop pulsating heat pipe, Proc Eng, 56, 88, 10.1016/j.proeng.2013.03.093

Muthukumar, 2003, Optimization of mix proportions of mineral aggregates using Box Behnken design of experiments, Cem Concr Compos, 25, 751, 10.1016/S0958-9465(02)00116-6

Asadi, 2020, An experimental study on characterization, stability and dynamic viscosity of CuO-TiO2/water hybrid nanofluid, J Mol Liq, 112987

Zufar, 2020, Numerical and experimental investigations of hybrid nanofluids on pulsating heat pipe performance, Int J Heat Mass Transfer, 146, 10.1016/j.ijheatmasstransfer.2019.118887

Lin, 2008, Effect of silver nano-fluid on pulsating heat pipe thermal performance, Appl Therm Eng, 28, 1312, 10.1016/j.applthermaleng.2007.10.019