One-year dynamic monitoring of a historic tower: damage detection under changing environment

Reynders E (2012) System identification methods for (operational) modal analysis: review and comparison. Arch Comput Methods Eng 19:51–124. doi: 10.1007/s11831-012-9069-x

Wenzel H (2009) Health monitoring of bridges. Wiley, New York

Magalhães F, Cunha À, Caetano E (2012) Vibration based structural health monitoring of an arch bridge: from automated OMA to damage detection. Mech Syst Signal Process 28:212–228. doi: 10.1016/j.ymssp.2011.06.011

Cross EJ, Koo KY, Brownjohn JMW, Worden K (2012) Long-term monitoring and data analysis of the Tamar Bridge. Mech Syst Signal Process 35:16–34. doi: 10.1016/j.ymssp.08.026

Ramos LF, Marques L, Lourenço PB, DeRoeck G, Campos-Costa A, Roque J (2010) Monitoring historical masonry structures with operational modal analysis: two case studies. Mech Syst Signal Process 24(5):1291–1305. doi: 10.1016/j.ymssp.01.011

Cabboi A (2013) Automatic operational modal analysis: challenges and application to historic structures and infrastructures. Ph.D. Thesis, University of Cagliari, Italy

Cantieni R (2014) One-year monitoring of a historic bell tower. In: Proceedings of the 9th international conference on structural dynamics (EURODYN 2014), Porto, Portugal, pp 1493–1500

Saisi A, Gentile C, Guidobaldi M (2015) Post-earthquake continuous dynamic monitoring of the Gabbia Tower in Mantua, Italy. Constr Build Mater 81:101–112. doi: 10.1016/j.conbuildmat.2015.02.010

Ubertini F, Cavalagli N, Comanducci G. (2015) Sensing hardware optimization and automated condition assessment of a monumental masonry bell-tower. In: Proceedings 1st ECCOMAS thematic conference on uncertainty quantification in computational sciences and engineering (UNCECOMP 2015), Crete, Greece, pp 477–487

Lorenzoni F, Casarin F, Caldon M, Islami K, Modena C (2016) Uncertainty quantification in structural health monitoring: applications on cultural heritage buildings. Mech Syst Signal Process 66–67:268–281. doi: 10.1016/j.ymssp.2015.04.032

Sohn H (2007) Effects of environmental and operational variability on structural health monitoring. Philos Trans R Soc A 365(539–560):1935. doi: 10.1098/rsta.2006

Hair J, Anderson R, Tatham R, Black W (1998) Multivariate data analysis. Prentice Hall, New Jersey

Montgomery D (1997) Introduction to statistical quality control. Wiley, New York

Zuccoli N (1988) Historic research on the Gabbia Tower (in Italian). Municipality of Mantua Internal Report, Mantua

Saisi A, Gentile C (2015) Post-earthquake diagnostic investigation of a historic masonry tower. J Cult Heritage 16:602–609. doi: 10.1016/j.culher.2014.09.002

Luzi L, Pacor F, Ameri G, Puglia R, Burrato P, Massa M, Augliera P, Franceschina G, Lovati S, Castro R (2013) Overview on the strong-motion data recorded during the May-June 2012 Emilia seismic sequence. Seismol Res Lett 84(4):629–644. doi: 10.1785/0220120154

Cabboi A, Magalhães F, Gentile C, Cunha À (2016) Automated modal identification and tracking: application to an iron arch bridge. Struct Control Health Monit. doi: 10.1002/stc.1854

Peeters B, De Roeck G (1999) Reference-based stochastic subspace identification for output-only modal analysis. Mech Syst Signal Process 13(6):855–878. doi: 10.1006/mssp.1999.1249

Peeters B (2000) System identification and damage detection in civil engineering. Ph.D. Thesis, Katholieke Universiteit Leuven, Belgium

Reynders E, Houbrechts J, De Roeck G (2012) Fully automated (operational) modal analysis. Mech Syst Signal Process 29:228–250. doi: 10.1016/j.ymssp.2012.01.007

Comanducci G, Ubertini F, Materazzi AL (2015) Structural health monitoring of suspension bridges with features affected by changing wind speed. J Wind Eng Ind Aerodyn 141:12–26. doi: 10.1016/j.jweia.2015.02.007

Ljung L (1999) System identification: theory for the user. Prentice Hall, New Jersey

SVS (2011) ARTeMIS Extractor 2011. http://www.svibs.com/

Busatta F (2012) Dynamic monitoring and automated modal analysis of large structures: methodological aspects and application to a historic iron bridge. Ph.D. Thesis, Politecnico di Milano, Italy

Cantieni R (2005) Experimental methods used in system identification of civil engineering structures. In: Proceedings of the 1st international operational modal analysis conference (IOMAC’05), Copenaghen, Denmark, pp 249–260

Kvalseth TO (1985) Cautionary note about R2. Am Stat 39(4):279–285. doi: 10.1080/00031305.1985.10479448

Guidobaldi M (2016) Vibration-based structural health monitoring for historic masonry towers. Ph.D. Thesis, Politecnico di Milano, Italy

Ubertini F, Comanducci G, Cavalagli N, Pisello AL, Materazzi AL, Cotana F (2016) Environmental effects on natural frequencies of the San Pietro bell tower in Perugia, Italy, and their removal for structural performance assessment. Mech Syst Signal Process. doi: 10.1016/j.ymssp.2016.05.025