On the significance of the H/E ratio in wear control: a nanocomposite coating approach to optimised tribological behaviour
Tóm tắt
Từ khóa
Tài liệu tham khảo
Oberle, 1951, Properties influencing wear of metals, J. Metals, 3, 438
Richardson, 1968, The wear of metals by relatively soft abrasives, Wear, 11, 245, 10.1016/0043-1648(68)90175-0
Lancaster, 1963, The relationship between the wear of carbon brush materials and their elastic moduli, Br. J. Appl. Phys., 14, 497, 10.1088/0508-3443/14/8/311
R.T. Spurr, T.P. Newcombe, The friction and wear of various materials sliding against unlubricated surfaces of different types and degrees of roughness, in: Proceedings of the Conference on Lubrication and Wear Institution of Mechanical Engineers, London, UK, 1957, Inst. Mech. Eng. (1957) 269.
Halling, 1982, Surface films in tribology, Tribologia, 1, 15
A. Matthews, The value of deposition processes for industrial tools, in: Proceedings of the 1st Conference on Materials Engineering, The University of Leeds, UK, July 1984, Institution of Metallurgists, 1984 p. 175, ISBN: 0-901-46224-1.
Rebholz, 1999, Structure, hardness and mechanical properties of magnetron-sputtered titanium–aluminium boride films, Surf. Coat. Technol., 120-121, 412, 10.1016/S0257-8972(99)00490-9
Lehoczy, 1978, Strength enhancement in thin-layered Al-Cu laminates, J. Appl. Phys., 49, 5479, 10.1063/1.324518
Lehoczy, 1978, Retardation of dislocation generation and motion in thin-layered metal laminates, Phys. Rev. Lett., 41, 1814, 10.1103/PhysRevLett.41.1814
Dimigen, 1991, Microstructure and wear behaviour of metal-containing diamond-like coatings, Surf. Coat. Technol., 49, 543, 10.1016/0257-8972(91)90114-C
Bewilogua, 1993, Preparation of W-C-H coatings by reactive magnetron sputtering, Surf. Coat. Technol., 61, 144, 10.1016/0257-8972(93)90217-C
Chu, 1992, Deposition and properties of polycrystalline TiN/NbN superlattice coatings, J. Vasc. Sci. Technol., A10, 1604, 10.1116/1.578030
Sproul, 1996, New routes in the preparation of mechanically hard films, Science, 273, 889, 10.1126/science.273.5277.889
Donohue, 1995, Investigation of superlattice coatings deposited by a combined steered-arc evaporation and unbalanced magnetron sputtering technique, Surf. Coat. Technol., 76, 149, 10.1016/0257-8972(95)02595-2
Donohue, 1997, Large-scale fabrication of hard superlattice thin films by combined steered-arc evaporation and unbalanced magnetron sputtering, Surf. Coat. Technol., 93, 69, 10.1016/S0257-8972(97)00028-5
Holleck, 1986, Material selection for hard coatings, J. Vasc. Sci. Technol., A4, 2661, 10.1116/1.573700
Holleck, 1988, Preparation and behaviour of wear-resistant TiC/TiB2, TiN/TiB2 and TiC/TiN coatings with high amounts of phase boundaries, Surf. Coat. Technol., 36, 707, 10.1016/0257-8972(88)90011-4
Mitterer, 1990, Sputter deposition of ultrahard coatings within the system Ti-B-C-N, Surf. Coat. Technol., 41, 351, 10.1016/0257-8972(90)90146-4
Ronkainen, 1991, Evaluation of some new titanium-based ceramic coatings in tribological model wear and metal cutting tests, Mater. Sci. Eng. A, 140, 602, 10.1016/0921-5093(91)90484-5
Ronkainen, 1992, Evaluation of some titanium-based ceramic coatings on high speed steel cutting tools, Surf. Coat. Technol., 49, 468, 10.1016/0257-8972(91)90102-3
Gissler, 1994, Structure and properties of Ti-B-N coatings, Surf. Coat. Technol., 68, 556, 10.1016/0257-8972(94)90217-8
Veprek, 1997, Conventional and new approaches towards the design of novel superhard materials, Surf. Coat. Technol., 97, 15, 10.1016/S0257-8972(97)00279-X
Veprek, 1998, New development in superhard coatings: the superhard nanocrystalline–amorphous composites, Thin Solid Films, 317, 449, 10.1016/S0040-6090(97)00665-2
Musil, 1999, Nanocrystalline and nanocomposite CrCu and CrCu-N films prepared by magnetron sputtering, Surf. Coat. Technol., 115, 32, 10.1016/S0257-8972(99)00065-1
Musil, 1999, ZrN/Cu nanocomposite film — a novel superhard material, Surf. Coat. Technol., 120-121, 179, 10.1016/S0257-8972(99)00482-X
Chokshi, 1989, On the validity of the Hall–Petch relationship in nanocrystalline materials, Scripta Metallurgica, 23, 1679, 10.1016/0036-9748(89)90342-6
Suryanarayana, 1992, Grain-size effects in nanocrystalline materials, J. Mater. Res., 7, 2114, 10.1557/JMR.1992.2114
Siegel, 1995, Mechanical properties of nanophase metals, Nanostruct. Mater., 6, 205, 10.1016/0965-9773(95)00044-5
Konstantinidis, 1998, On the ‘anomalous’ hardness of nanocrystalline materials, Nanostruct. Mater., 10, 1111, 10.1016/S0965-9773(98)00145-7
Ramalingam, 1995, Film-substrate interface stresses and their role in the tribological performance of surface coatings, Tribol. Int., 28, 145, 10.1016/0301-679X(95)98963-E
Ramalingam, 1996, Multi-layer and composite structures for advanced coatings, Surf. Coat. Technol., 81, 52, 10.1016/0257-8972(95)02618-5
Tsui, 1995, Nanoindentation and nanoscratching of hard carbon coatings for magnetic disks, Mater. Res. Soc. Symp. Proc., 383, 447, 10.1557/PROC-383-447
Pharr, 1998, Measurement of mechanical properties by ultra-low load indentation, Mater. Sci. Eng. A, 253, 151, 10.1016/S0921-5093(98)00724-2
Tsui, 1999, Substrate effects on nanoindentation mechanical property measurement of soft films on hard substrates, J. Mater. Res., 14, 292, 10.1557/JMR.1999.0042
D. Tabor, The Hardness of Metals, Oxford University Press, London, UK, 1951, ISBN: 0-521-29183-6.
Lawn, 1980, Elastic/plastic indentation damage in ceramics: the median/radial crack system, J. Am. Ceram. Soc., 63, 574, 10.1111/j.1151-2916.1980.tb10768.x
J.C. Anderson, K.D. Leaver, R.D. Rawlings, J.M. Alexander, Materials Science, Van Nostrand Reinhold, Wokingham, UK, 1985, ISBN: 0-442-30626-1.
P. Haasen, Physical Metallurgy, Cambridge University Press, London, UK, 1978, ISBN: 0-521-29183-6.
Mitterer, 1998, Nanocrystalline hard coatings within the quasi-binary system TiN-TiB2, Vacuum, 50, 313, 10.1016/S0042-207X(98)00059-1
Rebholz, 1998, Structure, mechanical and tribological properties of Ti-B-N and Ti-Al-B-N thin films produced by electron beam evaporation, J. Vasc. Sci. Technol. A, 16/5, 2851, 10.1116/1.581431
Rebholz, 1999, Structure, mechanical and tribological properties of sputtered TiAlBN thin films, Surf. Coat. Technol., 113, 126, 10.1016/S0257-8972(98)00840-8
Rebholz, 1999, Deposition and characterisation of TiAlBN coatings produced by direct electron-beam evaporation of Ti and Ti-Al-B-N material from a twin crucible source, Thin Solid Films, 343-344, 242, 10.1016/S0040-6090(98)01635-6
Rebholz, 1999, The effect of boron additions on the tribological behaviour of TiN coatings produced by electron-beam evaporative PVD, Surf. Coat. Technol., 116-119, 648, 10.1016/S0257-8972(99)00260-1
C. Rebholz, A. Leyland, D. Schneider, B. Schultrich, C. Charitidis, S. Logothetidis, A. Matthews, Correlation of hardness, elastic modulus and density measurements by nanoindentation and ultrasonic surface acoustic wave techniques on magnetron sputtered TiAlBN coatings, Thin Solid Films, in press.
Rebholz, 1999, Wear behaviour of carbon-containing tungsten coatings prepared by reactive magnetron sputtering, Surf. Coat. Technol., 112, 85, 10.1016/S0257-8972(98)00786-5
Rebholz, 1999, Structure, mechanical and tribological properties of nitrogen-containing chromium coatings prepared by reactive magnetron sputtering, Surf. Coat. Technol., 115, 222, 10.1016/S0257-8972(99)00240-6
Hammer, 1994, Titanium boron nitride coatings of very high hardness, Surf. Coat. Technol., 68/69, 194, 10.1016/0257-8972(94)90159-7
C. Rebholz, Synthesis and properties of titanium aluminium boron nitride coatings, Ph.D. thesis, The University of Hull, 1999.
C.F. Lewis (Ed.), Materials Selector 1991, Penton Publishing Inc., Cleveland OH, USA, 1990, Mater. Eng. (December) (1990) 98–99, ISSN: 0025-5319.
Neumann, 2000, Determination of true Knoop hardness, Adv. Mater. Processes, 157, 65
M.C. Joseph, C. Rebholz, A. Leyland, A. Matthews, Structure, hardness and wear behaviour of nitrogen-containing chromium–copper coatings, in preparation.
Seitzmann, 1998, Mechanical properties from instrumented indentation: uncertainties due to tip shape correction, J. Mater. Res., 13, 2936, 10.1557/JMR.1998.0401
Veprek, 1999, The search for novel superhard materials, J. Vasc. Sci. Technol. A, 17/5, 2401, 10.1116/1.581977
Niederhofer, 1999, Structural properties internal stress and thermal stability of nc-TiN/a-Si3N4 nc-TiN/TiSix and nc-(Ti1−yAlySix)N superhard nanocomposite coatings reaching the hardness of diamond, Surf. Coat. Technol., 120-121, 173, 10.1016/S0257-8972(99)00451-X
Cunha, 1999, Microstructure of CrN coatings produced by PVD techniques, Thin Solid Films, 355-356, 465, 10.1016/S0040-6090(99)00552-0
Rouzaud, 1995, A method for elastic modulus measurements of magnetron sputtered thin films dedicated to mechanical applications, Thin Solid Films, 270, 270, 10.1016/0040-6090(95)06921-6
Harry, 1998, Mechanical properties of W and W(C) thin films: Young’s modulus fracture toughness and adhesion, Thin Solid films, 332, 195, 10.1016/S0040-6090(98)01056-6
K. Holmberg, A. Matthews, Elsevier Tribology Series 28 D, in: Dowson (Ed.), Coatings Tribology: Properties Techniques and Applications in Surface Engineering, Elsevier, Amsterdam, 1994, ISBN: 0-444-88870-5.
Matthews, 1998, Design aspects for advanced tribological surface coatings, Surf. Coat. Technol., 100/101, 1, 10.1016/S0257-8972(97)00578-1
A. Matthews, A. Leyland, Developments in PVD tribological coatings, in: Proceedings of the 5th ASM Heat Treatment and Surface Engineering Conference in Europe, Gothenburg, Sweden, UK, 7–9 June 2000, ASM Int., Materials Park, OH, USA, 2000.