On the nonlinear evolution of the Poisson's ratio under quasi-static loading for a carbon fabric-reinforced thermoplastic. Part II: Analytical explanation

Polymer Testing - Tập 28 - Trang 324-330 - 2009
I. De Baere1, W. Van Paepegem1, J. Degrieck1
1Department of Materials Science and Engineering, Faculty of Engineering, Ghent University, Sint-Pietersnieuwstraat 41, B-9000 Gent, Belgium

Tài liệu tham khảo

De Baere, 2009, On the nonlinear evolution of the Poisson's ratio under quasi-static loading for a carbon fabric-reinforced thermoplastic, Part I: influence of the sensor, 28, 196 Gao, 1999, Damage accumulation in woven-fabric CFRP laminates under tensile loading: part 1. Observations of damage accumulation, Composites Science and Technology, 59, 123, 10.1016/S0266-3538(97)00231-5 Surgeon, 1999, Transverse cracking and Poisson's ratio reduction in cross-ply carbon fibre-reinforced polymers, Journal of Materials Science, 34, 5513, 10.1023/A:1004716612960 Gao, 1999, Damage accumulation in woven-fabric CFRP laminates under tensile loading: 2. Modelling the effect of damage on macro-mechanical properties, Composites Science and Technology, 59, 137, 10.1016/S0266-3538(97)00232-7 Smith, 1990, Poisson ratio as a damage parameter in the static tensile loading of simple crossply laminates, Composites Science and Technology, 38, 85, 10.1016/0266-3538(90)90073-E Parlevliet, 2007, Residual stresses in thermoplastic composites – a study of the literature. Part III: effects of thermal residual stresses, Composites Part A: Applied Science and Manufacturing, 38, 1581, 10.1016/j.compositesa.2006.12.005 DiLandro, 1996, Evaluation of residual stresses and adhesion in polymer composites, Composites Part A: Applied Science and Manufacturing, 27, 847, 10.1016/1359-835X(96)00046-2 Bassa, 1998, On the behaviour of the residual strain produced by matrix cracking in cross-ply laminates, Composites Part A, 29, 1425, 10.1016/S1359-835X(98)00037-2 Parlevliet, 2006, Residual stresses in thermoplastic composites—a study of the literature—part I: formation of residual stresses, Composites Part A: Applied Science and Manufacturing, 37, 1847, 10.1016/j.compositesa.2005.12.025 Senel, 2004, Residual stress analysis in symmetric thermoplastic laminated plates under thermal loads: analytic solution, Journal of Thermoplastic Composite Materials, 17, 481, 10.1177/0892705704038221 Filiou, 1999, In situ monitoring of the fibre strain distribution in carbon-fibre thermoplastic composites 1. Application of a tensile stress field, Composites Science and Technology, 59, 2149, 10.1016/S0266-3538(99)00072-X I. De Baere, W. Van Paepegem, J. Degrieck, H. Sol, D. Van Hemelrijck, A. Petreli, Comparison of different identification techniques for measurement of quasi-zero Poisson's ratio of fabric reinforced laminates, Composites Part A 38 (9) (2007) 2047–2054. I. De Baere, G. Luyckx, E. Voet, W. Van Paepegem, J. Degrieck, On the feasibility of optical fibre sensors for strain monitoring in thermoplastic composites under fatigue loading conditions, Special Issue of Optics and Lasers in Engineering 47 (2009) 403–411.