On the importance of advanced constitutive models in finite element simulations of deep tunnel advance

Abaqus, 2015. ABAQUS v6.14 Documentation. Dassault Systémes, Providence, RI, USA. Addis, M., Barton, N., Bandis, S., Henry, J., et al., 1990. Laboratory studies on the stability of vertical and deviated boreholes. In: SPE Annual Technical Conference and Exhibition. Society of Petroleum Engineers, pp. 1–30. Alonso, 2003, Ground response curves for rock masses exhibiting strain-softening behaviour, Int. J. Numer. Anal. Meth. Geomech., 27, 1153, 10.1002/nag.315 Bažant, 1983, Crack band theory for fracture of concrete, Mater. Struct., 16, 155 Bažant, 1978, Practical prediction of time-dependent deformations of concrete, Mater. Struct., 11, 307 Bažant, 1989, Solidification theory for concrete creep. i: formulation, J. Eng. Mech., 115, 1691, 10.1061/(ASCE)0733-9399(1989)115:8(1691) Bendezu, 2017, Finite element analysis of blast-induced fracture propagation in hard rocks, Comp. Struct., 182, 1, 10.1016/j.compstruc.2016.11.006 Callari, 2004, Coupled numerical analysis of strain localization induced by shallow tunnels in saturated soils, Comp. Geotech., 31, 193, 10.1016/j.compgeo.2004.01.004 Callari, 2002, Finite element methods for the analysis of strong discontinuities in coupled poro-plastic media, Comp. Meth. Appl. Mech. Eng., 191, 4371, 10.1016/S0045-7825(02)00374-2 Crook, 2003, Computational modelling of the localized deformation associated with borehole breakout in quasi-brittle materials, J. Petrol. Sci. Eng., 38, 177, 10.1016/S0920-4105(03)00031-7 Dragon, 1979, A continuum model for plastic-brittle behaviour of rock and concrete, Int. J. Eng. Sci., 17, 121, 10.1016/0020-7225(79)90058-2 Egger, 2000, Design and construction aspects of deep tunnels (with particular emphasis on strain softening rocks), Tunnel. Undergr. Space Technol., 15, 403, 10.1016/S0886-7798(01)00008-6 Grassl, 2006, Damage-plastic model for concrete failure, Int. J. Solids Struct., 43, 7166, 10.1016/j.ijsolstr.2006.06.032 Hauseux, 2016, Fe modelling with strong discontinuities for 3d tensile and shear fractures: application to underground excavation, Comp. Meth. Appl. Mech. Eng., 309, 269, 10.1016/j.cma.2016.05.014 Hoek, 1980, Empirical strength criterion for rock masses, J. Geotech. Eng. Div., Proc. Am. Soc. Civil Engin., 106, 1013 Hoek, 1997, Practical estimates of rock mass strength, Int. J. Rock Mech. Min. Sci., 34, 1165, 10.1016/S1365-1609(97)80069-X Hoek, 2006, Empirical estimation of rock mass modulus, Int. J. Rock Mech. Min. Sci., 43, 203, 10.1016/j.ijrmms.2005.06.005 Hoek, E., Carranza-Torres, C., Corkum, B., 2002. Hoek-Brown failure criterion – 2002 edition. In: Hammah, R. (Ed.), Proceedings of the 5th North American Rock Mechanics Symposium and the 17th Tunnelling Association of Canada. Toronto, Ontario, Canada, pp. 267–273. Kawamoto, 1988, Deformation and fracturing behaviour of discontinuous rock mass and damage mechanics theory, Int. J. Numer. Anal. Meth. Geomech., 12, 1, 10.1002/nag.1610120102 Lade, 1995, Single hardening constitutive model for soil, rock and concrete, Int. J. Solids Struct., 32, 1963, 10.1016/0020-7683(94)00247-T Lee, 2008, A new numerical procedure for elasto-plastic analysis of a circular opening excavated in a strain-softening rock mass, Tunnel. Undergr. Space Technol., 23, 588, 10.1016/j.tust.2007.11.002 Lombardi, 1971, Zur Bemessung der Tunnelauskleidung mit Berücksichtigung des Bauvorganges, Schweizerische Bauzeitung, 89, 793 Menétrey, 1995, Triaxial failure criterion for concrete and its generalization, ACI Struct. J., 92, 311 Meschke, 1996, Consideration of aging of shotcrete in the context of a 3d-viscoplastic material model, Int. J. Numer. Meth. Eng., 39, 3123, 10.1002/(SICI)1097-0207(19960930)39:18<3123::AID-NME993>3.0.CO;2-R Negro, 2000, Prediction and performance: a review of numerical analyses for tunnels, 409 Neuner, 2017, An extended damage plasticity model for shotcrete: formulation and comparison with other shotcrete models, Materials, 10, 82, 10.3390/ma10010082 Neuner, 2017, Influence of the constitutive model for shotcrete on the predicted structural behavior of the shotcrete shell of a deep tunnel, Materials, 10, 577, 10.3390/ma10060577 Neuner, 2017, Time-dependent material properties of shotcrete: experimental and numerical study, Materials, 10, 1067, 10.3390/ma10091067 Papanastasiou, 1992, Numerical treatment of progressive localization in relation to borehole stability, Int. J. Numer. Anal. Meth. Geomech., 16, 389, 10.1002/nag.1610160602 Pöttler, 1990, Time-dependent rock-shotcrete interaction - a numerical shortcut, Comp. Geotech., 9, 149, 10.1016/0266-352X(90)90011-J Pourhosseini, 2014, Development of an elasto-plastic constitutive model for intact rocks, Int. J. Rock Mech. Min. Sci., 66, 1, 10.1016/j.ijrmms.2013.11.010 Salehnia, 2015, Coupled modeling of excavation damaged zone in boom clay: strain localization in rock and distribution of contact pressure on the gallery’s lining, Comp. Geotech., 69, 396, 10.1016/j.compgeo.2015.06.003 Schädlich, 2014, A new constitutive model for shotcrete, 103 Schreter, M., Neuner, M., Unteregger, D., Hofstetter, G., Reinhold, C., Cordes, T., Bergmeister, K., 2017. Application of a damage plasticity model for rock mass to the numerical simulation of tunneling. In: Hofstetter, G., Bergmeister, K., Eberhardsteiner, J., Meschke, G., Schweiger, H.F. (Eds.), Proceedings of the 4th International Conference on Computational Methods in Tunneling and Subsurface Engineering (EURO:TUN 2017). Innsbruck University, Austria, pp. 549–556. Schuller, 2002, Application of a multilaminate model to simulation of shear band formation in NATM-tunnelling, Comp. Geotech., 29, 501, 10.1016/S0266-352X(02)00013-7 Simo, 2006, vol. 7 Swoboda, 1998, Damage model for jointed rock mass and its application to tunnelling, Comp. Geotech., 22, 183, 10.1016/S0266-352X(98)00009-3 Unteregger, D., 2015. Advanced Constitutive Modeling of Intact Rock and Rock Mass, Ph.D. thesis. Innsbruck University. Unteregger, 2015, A damage plasticity model for different types of intact rock, Int. J. Rock Mech. Min. Sci., 80, 402, 10.1016/j.ijrmms.2015.09.012 Varas, 2005, Study of bifurcation in the problem of unloading a circular excavation in a strain-softening material, Tunnel. Undergr. Space Technol., 20, 311, 10.1016/j.tust.2004.12.003 Vardoulakis, 1988, Borehole instabilities as bifurcation phenomena, Int. J. Rock Mech. Min. Sci. Geomech. Abst., 25, 159, 10.1016/0148-9062(88)92298-X Wang, 2015, Numerical modeling of non-planar hydraulic fracture propagation in brittle and ductile rocks using XFEM with cohesive zone method, J. Petrol. Sci. Eng., 135, 127, 10.1016/j.petrol.2015.08.010 Weber, N., Siebert, P., Willbrand, K., Feinendegen, M., Clauser, C., Fries, T.-P., 2013. The XFEM with an explicit-implicit crack description for hydraulic fracture problems. In: Effective and Sustainable Hydraulic Fracturing. InTech, pp. 711–724. Wilson, 2016, Phase-field modeling of hydraulic fracture, J. Mech. Phys. Solids, 96, 264, 10.1016/j.jmps.2016.07.019 Yang, 2003, Damage mechanics of jointed rock in tunneling, Numer. Simul. Tunnel., 117, 10.1007/978-3-7091-6099-2_7 Zervos, A., Papanastasiou, P., Cook, J., et al., 1998. Elastoplastic finite element analysis of inclined wellbores. In: SPE/ISRM Rock Mechanics in Petroleum Engineering, 8–10 July, Trondheim, Norway. Society of Petroleum Engineers, pp. 1–10.