On the impact toughness of Al-15 vol.% B 4 C metal matrix composites

Shorowordi, 2003, Microstructure and interface characteristics of B4C, SiC and Al2O3 reinforced Al matrix composites: a comparative study, J Mater Proc Technol, 142, 738, 10.1016/S0924-0136(03)00815-X Surappa, 1981, Preparation and properties of cast aluminium–ceramic particle composites, J Mater Sci, 16, 983, 10.1007/BF00542743 Oh, 1989, Wetting of ceramic particulates with liquid aluminium alloys. Part I. Experimental techniques, Metall Trans A, 20A, 527, 10.1007/BF02653932 Oh, 1989, Wetting of ceramic particulates with liquid aluminium alloys. Part II. Study of wettability, Metall Trans A, 20A, 533, 10.1007/BF02653933 Lloyd, 1989, The solidification microstructure of particulate reinforced aluminium/SiC composites, Comp Sci Technol, 35, 159, 10.1016/0266-3538(89)90093-6 Shorowordi, 2004, Velocity effects on the wear, friction and tribochemistry of aluminum MMC sliding against phenolic brake pad, Wear, 256, 1176, 10.1016/j.wear.2003.08.002 Ye, 2006, Cryomilling for the fabrication of a particulate B4C reinforced Al nanocomposite: Part I. Effects of process conditions on structure, Metall Mater Trans A, 37A, 3101 Yazdani, 2011, Evolution of reinforcement distribution in Al-B4C composites during accumulative roll bonding, Mater Des, 32, 3137, 10.1016/j.matdes.2011.02.063 Raja, 2014, Effects on microstructure and hardness of Al-B4C metal matrix composite fabricated through powder metallurgy, Int J Mech Eng, 1, 1 Rajkumar, 2013, 306 Lai, 2013, Precipitation strengthening of Al-B4C metal matrix composites alloyed with Sc and Zr, J Alloys Comp, 552, 227, 10.1016/j.jallcom.2012.10.096 Orowan, 1948, Symposium on internal stresses Knipling, 2010, Precipitation evolution in Al-0.1Sc, Al-0.1Zr and Al-0.1Sc-0.1Zr (at. %) alloys during isochronal aging, Acta Mater, 58, 5184, 10.1016/j.actamat.2010.05.054 Knipling, 2006, Criteria for developing castable, creepresistant aluminum-based alloys – a review, Z Met, 97, 246 Knipling, 2011, Ambient- and high-temperature mechanicalproperties of isochronally aged Al-0.06Sc, Al-0.06Zr and Al-0.06Sc-0.06Zr (at. %) alloys, Acta Mater, 59, 943, 10.1016/j.actamat.2010.10.017 Clouet, 2005, Precipitation kinetics of Al3Zr and Al3Sc in aluminum alloys modeled with cluster dynamics, Acta Mater, 53, 2313, 10.1016/j.actamat.2005.01.038 Gode, 2013, Mechanical properties of hot pressed SiCp and B4Cp/Alumix 123 composites alloyed with minor Zr, Compos Part B, 54, 34, 10.1016/j.compositesb.2013.04.068 Shankar, 2013, Individual and combined effect of reinforcements on stir cast aluminium metal matrix composites – a review, Int J Curr Eng Technol, 3, 922 Baradeswaran, 2013, Influence of B4C on the tribological and mechanical properties of Al 7075–B4C composites, Compos Part B, 54, 146, 10.1016/j.compositesb.2013.05.012 Elsebaie, 2011, The role of alloying additives and aging treatment on the impact behavior of 319 cast alloy, Mater Des, 32, 3205, 10.1016/j.matdes.2011.02.047 Elsebaie, 2011, Effects of Sr-modification, iron-based intermetallics and aging treatment on the impact toughness of 356 Al-Si-Mg alloy, J Mater Sci, 46, 3027, 10.1007/s10853-010-5181-1 Ibrahim, 2014, Mechanical properties and fracture of Al-15 vol. % B4C based metal matrix composites, Int J Cast Met Res, 27, 7, 10.1179/1743133613Y.0000000072 Fuller, 2003, Mechanical properties of Al (Sc, Zr) alloys at ambient and elevated temperatures, Acta Mater, 51, 4803, 10.1016/S1359-6454(03)00320-3 Lashgari, 2010, Heat treatment effect on the microstructure, tensile properties and dry sliding wear behavior of A356-10% B4C cast composites, Mater Des, 31, 4414, 10.1016/j.matdes.2010.04.034 Toptan, 2010, The effect of Ti addition on the properties of Al-B4C interface: a microstructural study, Mater Sci Forum, 636–637, 192, 10.4028/www.scientific.net/MSF.636-637.192 Ibrahim, 2013, Metallurgical parameters controlling matrix/B4C particulate interaction in aluminium-boron carbide metal matrix composites, Int J Cast Met Res, 26, 364, 10.1179/1743133613Y.0000000074 Ibrahim, 2013, A new technology for the production of Al-B4C metal matrix composites, Trans AFS Trans., 121, 99 Lu, 2011, A comparison between B4C-ZrB2-Al composite and B4C-Al composite on microstructure and mechanical properties, Adv Mater Res, 279, 71, 10.4028/www.scientific.net/AMR.279.71 Parker, 1995, The effect of small additions of scandium on the properties of aluminium alloys, J Mater Sci, 30, 452, 10.1007/BF00354411 Marquis, 2001, Magnesium segregation at the Al/Al3Sc interface in an Al-Mg-Sc Alloy, Acta Mater, 49, 1909, 10.1016/S1359-6454(01)00116-1 Johnson, 2011 Fuller, 2002, Microstructure and mechanical properties of a 5754 aluminum alloy modified by Sc and Zr additions, Mater Sci Eng A, A338, 8, 10.1016/S0921-5093(02)00056-4 Miserez, 2003 Zhang, 2006, Tensile behavior and dynamic failure of aluminum 6092/B4C composites, Mater Sci Eng A, A433, 70, 10.1016/j.msea.2006.06.055 Lee, 2001, Tensile properties of 5052 Al matrix composites reinforced with B4C particles, Metall Mater Trans A, 32A, 2142, 10.1007/s11661-001-0031-z Abenojar, 2007, Optimization of processing parameters for the Al – 10% B4C system obtained by mechanical alloying, J Mater Proc Technol, 184, 441, 10.1016/j.jmatprotec.2006.11.122