On the fracture of solids characterized by one or two parameters: Theory and practice

Al-Ani, 1991, J dominance of short cracks in tension and bending, J. Mech. Phys. Solids, 39, 23, 10.1016/0022-5096(91)90029-N Anderson, 1991, Specimen size requirements for fracture toughness testing in the transition region, J. Testing Evaluation, 19, 123, 10.1520/JTE12544J Begley, 1972, The J integral as a fracture criterion, 1 Betegon, 1991, Two parameter characterization of elastic-plastic crack tip fields, J. Appl. Mech., 58, 104, 10.1115/1.2897135 Bilby, 1986, A finite element investigation of the effect of specimen geometry on the fields of stress and strain at the tips of stationary cracks, 37 Dodds, 1991, A frame work to correlate aW ratio effects on elastic-plastic fracture toughness (Jc), Int. J. Fract., 48, 1, 10.1007/BF00012499 Dodds, 1992, Continuum and micromcchanics treatment of constraint in fracture Harlin, 1988, The influence of crack size on the ductile-brittle transition, A415, 197 Hutchinson, 1968, Singular behavior at the end of a tensile crack in a hardening material, J. Mech. Phys. Solids, 16, 13, 10.1016/0022-5096(68)90014-8 Hutchinson, 1968, Plastic stress and strain fields at a crack tip, J. Mech. Phys. Solids, 16, 337, 10.1016/0022-5096(68)90021-5 Kikuchi, 1992, Analysis of HRR fields of surface cracks, Int. J. Fract., 58, 273, 10.1007/BF00015620 Kirk, 1993, Effect of constraint on specimen dimensions needed to obtain structurally relevant toughness measures, 79 Kordisch, 1989, The influence of triaxiality on stable crack growth, Nuclear Engng Design, 112, 27, 10.1016/0029-5493(89)90142-8 Kumar, 1981, An engineering approach for elastic plasticfracture analysis, Electric Power Research Institute Landes, 1974, Test results from J integral studies: an attempt to establish a Jic testing procedure, 170 Larsson, 1973, Influence of non-singular stress terms on small scale yielding at crack tips in elastic-plastic material, J. Mech. Phys. Solids, 21, 263, 10.1016/0022-5096(73)90024-0 Leevers, 1982, Inherent stress biaxiality in various fracture specimen geometry, Int. J. Fract., 19, 311, 10.1007/BF00012486 Liu, 1987, Plane strain crack tip field and a dual-parameter fracturecriterion for non-linear fracture mechanics, Theor. Appl. Fract. Mech., 7, 149, 10.1016/0167-8442(87)90031-0 McClintock, 1986, A criterion for ductile fracture for the growth of holes, J. Appl. Mech., 35, 363, 10.1115/1.3601204 McMeeking, 1979, On criteria for J dominance of crack tip fields in large scale yielding, 175 O'Dowd, 1991, Family of crack-tip fields characterized by a triaxiality parameter—I. Structure of fields, J. Mech. Phys. Solids, 39, 989, 10.1016/0022-5096(91)90049-T O'Dowd, 1992, Family of crack-tip fields characterized by a triaxiality parameter—II. Fracture applications, J. Mech. Phys. Solids, 40, 939, 10.1016/0022-5096(92)90057-9 O'Dowd, 1992, Two parameter fracture mechanics: theory and applications, National Fracture Symposium on Fracture Mechanics Rice, 1968, A path independent integral and the approximac analysis of strain concentration by notches and cracks, J. Appl. Mech., 35, 379, 10.1115/1.3601206 Rice, 1968, Plane strain deformation near a crack tip in a power law hardening material, J. Mech. Phys. Solids, 16, 1, 10.1016/0022-5096(68)90013-6 Rice, 1969, On the ductile enlargement of voids in triaxial stress fields, J. Mech. Phys. Solids, 17, 201, 10.1016/0022-5096(69)90033-7 Ritchie, 1973, On the relationship between critical tensile stress and fracture toughness in mild steel, J. Mech. Phys. Solids, 21, 395, 10.1016/0022-5096(73)90008-2 Ritchie, 1985, On macroscopic and microscopic analyses for crack initiation and crack growth toughness in ductile alloys, Metall. Trans. A, 16A, 233, 10.1007/BF02816050 Sharma, 1991, Determination of higher-order terms in asymptotic elastoplastic crack tip solutions, J. Mech. Phys. Solids, 39, 1043, 10.1016/0022-5096(91)90051-O Shih, 1983, Tables of Hutchinson-Rice-Rosengren singular field quantities, Brown University Report, MRL E-147 Shih, 1981, Requirements for a one parameter characterization of crack tip fields by the HRR singularity, Int. J. Fract., 17, 27, 10.1007/BF00043119 Sumpter, 1993, An experimental investigation of the T stress approach, 492 Wang, 1991, A two-parameter characterization of elastic-plastic crack tip fields and application to cleavage fracture Yang, 1993, Higher order asymptotic crack tip fields in a power-law hardening material Yang, 1993, Complete theoretical analysis for higher order asymptotic terms and the HRR zone at a crack tip for Mode I and Mode II loading of a hardening material, Acta Mechanica, 98, 79, 10.1007/BF01174295 Yang, 1993, Higher order asymptotic crack tip fields in a power-law hardening material, Engng Fract. Mech., 45, 1, 10.1016/0013-7944(93)90002-A