On the direct strength design of cold-formed steel columns failing in local-distortional interactive modes

American Iron and Steel Institute (AISI), North American Specification (NAS) for the Design of Cold-Formed Steel Structural Members (AISI-S100-16), Washington DC, 2016. Schafer, 2008, Review: the direct strength method of cold-formed steel member design, J. Constr. Steel Res., 64, 766, 10.1016/j.jcsr.2008.01.022 Camotim, 2016, Direct strength method (DSM) – a general approach for the design of cold-formed steel structures, 69 Kwon, 1992, Tests of cold-formed channels with local and distortional buckling, J. Struct. Eng. (ASCE), 118, 1786, 10.1061/(ASCE)0733-9445(1992)118:7(1786) Young, 1998, Design of lipped channel columns, J. Struct. Eng. (ASCE), 124, 140, 10.1061/(ASCE)0733-9445(1998)124:2(140) Kwon, 2009, Compression tests of high strength cold-formed steel channel with buckling interaction, J. Constr. Steel Res., 65, 278, 10.1016/j.jcsr.2008.07.005 Loughlan, 2012, The failure of thin-walled lipped channel compression members due to coupled local-distortional interactions and material yielding, Thin-Walled Struct., 61, 14, 10.1016/j.tws.2012.03.025 Young, 2013, Cold-formed steel lipped channel columns influenced by local-distortional interaction: strength and DSM design, J. Struct. Eng. (ASCE), 139, 1059, 10.1061/(ASCE)ST.1943-541X.0000694 Y.B. Kwon, N.K. Kim, B.S. Kim, A study on the direct strength method for compression members undergoing mixed mode buckling, in: Proceedings of 3rd International Symposium on Steel Structures (ISSS’05 - Seoul 10-11/03), 2005, pp. 108–119. Dinis, 2014, Local-distortional interaction in cold-formed steel rack-section columns, Thin-Walled Struct., 81(August), 185, 10.1016/j.tws.2013.09.010 Yap, 2011, Experimental study of high strength cold-formed stiffened-web C-sections in compression, J. Struct. Eng. (ASCE), 137, 162, 10.1061/(ASCE)ST.1943-541X.0000271 He, 2014, Post-buckling behaviour and DSM design of web-stiffened lipped channel columns with distortional and local mode interaction, Thin-Walled Struct., 84, 189, 10.1016/j.tws.2014.07.001 Yang, 2004, Compression tests of high strength steel channel columns with interaction between local and distortional buckling, J. Struct. Eng. (ASCE), 130, 1954, 10.1061/(ASCE)0733-9445(2004)130:12(1954) Yap, 2008, Experimental study of complex high-strength cold-formed cross-shaped steel section, J. Struct. Eng. (ASCE), 134, 1322, 10.1061/(ASCE)0733-9445(2008)134:8(1322) Dinis, 2014, Strength, interactive failure and design of web-stiffened lipped channel columns exhibiting distortional buckling, Thin-Walled Struct., 81, 195, 10.1016/j.tws.2013.09.016 R. Bebiano, P. Pina, N. Silvestre, D. Camotim, GBTul 1.0b – Buckling and Vibration Analysis of Thin-Walled Members, DECivil/IST, Technical University of Lisbon, 2008. Martins, 2015, On the relevance of local-distortional interaction effects in the behaviour and design of cold-formed steel columns, Comput. Struct., 160, 57, 10.1016/j.compstruc.2015.08.003 Simulia Inc., Abaqus Standard (version 6.7-5), 2008. Silvestre, 2012, Post-buckling behaviour and direct strength design of lipped channel columns experiencing local/distortional interaction, J. Constr. Steel Res., 73, 12, 10.1016/j.jcsr.2012.01.005 Dinis, 2015, Cold-formed steel columns undergoing local-distortional coupling: behaviour and direct strength prediction against interactive failure, Comput. Struct., 147, 181, 10.1016/j.compstruc.2014.09.012 Martins, 2016, On the influence of local-distortional interaction in the behaviour and design of cold-formed steel web-stiffened lipped channel columns, Thin-Walled Struct., 101, 181, 10.1016/j.tws.2015.11.021 Martins, 2017, Behaviour and DSM design of stiffened lipped channel columns undergoing local-distortional interaction, J. Constr. Steel Res., 128, 99, 10.1016/j.jcsr.2016.07.030 Schafer, 1998, Computational modeling of cold-formed steel: characterizing geometric imperfections and residual stresses, J. Constr. Steel Res., 47, 193, 10.1016/S0143-974X(98)00007-8 Schafer, 2002, Local, distortional and Euler buckling in thin-walled columns, J. Struct. Eng. (ASCE), 128, 289, 10.1061/(ASCE)0733-9445(2002)128:3(289) Pham, 2012, Direct strength design of cold-formed c-sections for shear and combined actions, J. Struct. Eng. (ASCE), 138, 759, 10.1061/(ASCE)ST.1943-541X.0000510 Martins, 2017, Distortional failure of cold-formed steel beams under uniform bending: behaviour, strength and DSM design, Thin-Walled Struct., 118, 196, 10.1016/j.tws.2017.04.009 Yap, 2008