On the development of shell buckling knockdown factors for imperfection sensitive conical shells under pure bending

Seide, 1960 Khakimova, 2016, Buckling of axially compressed CFRP truncated cones: experimental and numerical investigation, Compos. Struct., 146, 232, 10.1016/j.compstruct.2016.02.023 Khakimova, 2017, Buckling of axially compressed CFRP cylinders with and without additional lateral load: experimental and numerical investigation, Thin-Walled Struct., 119, 178, 10.1016/j.tws.2017.06.002 Błachut, 2012, vol. 3, 3 Błachut, 2013, Combined stability of geometrically imperfect conical shells, Thin-Walled Struct., 67, 121, 10.1016/j.tws.2013.02.007 Błachut, 2012, Interactive plastic buckling of cones subjected to axial compression and external pressure, Ocean Eng., 48, 10, 10.1016/j.oceaneng.2012.03.018 Ifayefunmi, 2018, Imperfection sensitivity: a review OF buckling behaviour OF cones, cylinders and domes, J. Press. Vessel Technol., 10.1115/1.4039695 Ifayefunmi, 2011 Ifayefunmi, 2011, The effect of shape, boundary and thickness imperfections on plastic buckling of cones, vol. 2 Weingarten, 1968 Dyer, 1974 Shadmehri, 2012 Arbocz, 1968, Buckling of conical shells under axial compression, NASA CR, 1162 Chryssanthopoulus, 1998, Buckling design of conical shells based on validated numerical models, Thin-Walled Struct., 31, 257, 10.1016/S0263-8231(98)00006-8 Koiter, 1967, The stability of elastic equilibrium [PhD thesis] - 1945, 1 G. Garcea, F. Liguori, L. Leonetti, D. Magisano and A. Madeo, "Accurate and efficient a posteriori account of geometrical imperfections in Koiter finite element analysis," Int. J. Numer. Methods Eng., 112: 1154– 1174. doi: 10.1002/nme.5550 . Liguori, 2018, Post-buckling optimisation strategy of imperfection sensitive composite shells using Koiter method and Monte Carlo simulation, Compos. Struct., 192, 654, 10.1016/j.compstruct.2018.03.023 J. Rotter, "The new method of reference resistance design of shell structures".Proc. SDSS 2016, International Colloquium on Stabiltiy and Ductility of Steel Structures, Timisoara, Romania. Hilburger, 2018, On the development of shell buckling knockdown factors for stiffened metallic launch vehicle cylinders Hilburger, 2012, NF1676L Khakimova, 2014, The single perturbation load approach applied to imperfection sensitive conical composite structures, Thin-Walled Struct., 84, 369, 10.1016/j.tws.2014.07.005 Castro, 2014, Geometric imperfections and lower-bound methods used to calculate knock-down factors for axially compressed composite cylindrical shells, Thin-Walled Struct., 74, 118, 10.1016/j.tws.2013.08.011 Arbocz, 1979 Arbocz, 2002, Future directions and challenges in shell stability, Thin-Walled Struct., 40, 729, 10.1016/S0263-8231(02)00024-1 Elishakoff, 2012, Probabilistic resolution of the twentieth century conundrum in elastic stability, Thin-Walled Struct., 59, 35, 10.1016/j.tws.2012.04.002 Elishakoff, 2012, Optimization and antioptimization of buckling load for composite cylindrical shells under uncertainties, AIAA J., 50, 1513, 10.2514/1.J051300 Wagner, 2019, Probabilistic and deterministic lower-bound design benchmarks for cylindrical shells under axial compression, Thin-Walled Struct. Kriegesmann, 2010, Probabilistic design of axially compressed composite cylinders with geometric and loading imperfections, Int. J. Struct. Stab. Dyn., 10, 623, 10.1142/S0219455410003658 Kriegesmann, 2014, Sample size dependent probabilistic design of axially compressed cylindrical shells, Thin-Walled Struct., 74, 222, 10.1016/j.tws.2013.10.003 Kriegesmann, 2011, Fast probabilistic design procedure for axially compressed composite cylinders, Compos. Struct., 93, 3140 Wagner, 2017, Stimulating the realistic worst case buckling scenario of axially compressed cylindrical composite shells, Compos. Struct., 160, 1095, 10.1016/j.compstruct.2016.10.108 Wagner, 2018 Croll, 1975, Towards simple estimates of shell buckling loads, Stahlbau, 1 & 2 Croll, 1995, Towards a rationally based elastic-plastic shell buckling design, Thin-Walled Struct., 23, 67, 10.1016/0263-8231(95)00005-X Hühne, 2008, Robust design of composite cylindrical shells under axial compression — simulation and validation, Thin-Walled Struct., 46, 947, 10.1016/j.tws.2008.01.043 Hao, 2014, Worst Multiple Perturbation Load Approach of stiffened shells with and without cutouts for improved knockdown factors, Thin-Walled Struct., 82, 321, 10.1016/j.tws.2014.05.004 Meurer, 2016, Probabilistic perturbation load approach for designing axially compressed cylindrical shells, Thin-Walled Struct., 107, 648, 10.1016/j.tws.2016.07.021 Tian, 2017, A high-fidelity approximate model for determining lower-bound buckling loads for stiffened shells Wang, 2013, Improved knockdown factors for cylindrical shells using worst multi-perturbation load approach, Shell Structures: Theory and Application, 263 Wang, 2016, Numerically and experimentally predicted knockdown factors for stiffened shells under axial compression, Thin-Walled Struct., 109, 13, 10.1016/j.tws.2016.09.008 Wagner, 2018, Robust knockdown factors for the design of cylindrical shells under axial compression: potentials, practical application and reliability analysis, Int. J. Mech. Sci., 135, 410, 10.1016/j.ijmecsci.2017.11.020 Wagner, 2016, Constant Single-Buckle Imperfection Principle to determine a lower bound for the buckling load of unstiffened composite cylinders under axial compression, Compos. Struct., 139, 120, 10.1016/j.compstruct.2015.11.047 Wagner, 2018, Robust knockdown factors for the design of cylindrical shells under axial compression: analysis and modeling of stiffened and unstiffened cylinders, Thin-Walled Struct., 127, 629, 10.1016/j.tws.2018.01.041 Wagner, 2019, Decision tree-based machine learning to optimize the laminate stacking of composite cylinders for maximum buckling load and minimum imperfection sensitivity, Compos. Struct., ume 220, 45, 10.1016/j.compstruct.2019.02.103 Wagner, 2019, Buckling analysis of an imperfection-insensitive hybrid composite cylinder under axial compression – numerical simulation, destructive and non-destructive experimental testing, Compos. Struct., 225, 111152, 10.1016/j.compstruct.2019.111152 Wagner, 2017, Robust design criterion for axially loaded cylindrical shells - simulation and Validation, Thin-Walled Struct., 115, 154, 10.1016/j.tws.2016.12.017 Wagner, 2017, Robust knockdown factors for the design of axially loaded cylindrical and conical composite shells - development and Validation, Compos. Struct., 173, 281, 10.1016/j.compstruct.2017.02.031 Hao, 2016, Imperfection-insensitive design of stiffened conical shells based on equivalent multiple perturbation load approach, Compos. Struct., 136, 405, 10.1016/j.compstruct.2015.10.022 Wagner, 2018, Towards robust knockdown factors for the design of conical shells under axial compression, Int. J. Mech. Sci., 146–147, 60, 10.1016/j.ijmecsci.2018.07.016 Wagner, 2019, Robust design of imperfection sensitive thin-walled shells under axial compression, bending or external pressure, Int. J. Mech. Sci., 156, 205, 10.1016/j.ijmecsci.2019.02.047 Wagner, 2019, Geometric imperfection and lower-bound analysis of spherical shells under external pressure, Thin-Walled Struct., ume 143, 106195, 10.1016/j.tws.2019.106195 Wagner, 2018, Robust knockdown factors for the design of spherical shells under external pressure: development and validation, Int. J. Mech. Sci., 141, 58, 10.1016/j.ijmecsci.2018.03.029 Wang, 2013, Determination of realistic worst imperfection for cylindrical shells using surrogate model. Structural and Multidisciplinary Optimization, Struct. Multidiscip. Optim., 48, 777, 10.1007/s00158-013-0922-9 Hao, 2015, Hybrid framework for reliability-based design optimization of imperfect stiffened shells, AIAA J., 53, 2878, 10.2514/1.J053816 Wang, 2017, Grid-pattern optimization framework of novel hierarchical stiffened shells allowing for imperfection sensitivity, Aero. Sci. Technol., 62, 114, 10.1016/j.ast.2016.12.002 ECCS, 2008 J. Rotter, "Cylindrical shells under axial compression".Chapter 2 of the Book Buckling of Thin Metal Structures, edited by JG Teng and JM Rotter, Spon, London, pp-42-87. Rotter, 2011, Shell buckling design and assessment and the LBA-MNA methodology, Stahlbau, 80, 791, 10.1002/stab.201101491 Rotter, 2008, The elastic-plastic imperfection sensitivity of axially compressed cylinders with weld depressions, Proc. Eurosteel, 1497 J. Rotter and A. Hussain, "Length effects in the buckling of imperfect axially compressed cylinders".Proc. SDSS 2016, International Colloquium on Stabiltioy and Ductility of Steel Structures, Timisoara, Romania. A. Evkin, "Local buckling of cylindrical shells - pogorevlov's geometrical method," Special Issue: Problems of Nonlinear Mechanics and Physics of Materials , April 2018, Springer-Verlag. Wullschleger, 2002, Buckling of geometrically imperfect cylindrical shells - definition of a buckling load, Int. J. Non-Linear Mech., 37, 645, 10.1016/S0020-7462(01)00089-0