On the application of strong thermoplastic–thermoset interactions for developing advanced aerospace-composite joints

Lu, 2022, Composite mechanical deformation based semi-analytical prediction model for dynamic loaded contact pressure of thin-walled aerospace spiral bevel gears, Thin-Walled Struct., 171, 10.1016/j.tws.2021.108794 Zhang, 2023, Investigation of bird-strike resistance of composite sandwich curved plates with lattice/foam cores, Thin-Walled Struct., 182, 10.1016/j.tws.2022.110203 Liu, 2023, Joining mechanism and damage of self-piercing riveted joints in carbon fibre reinforced polymer composites and aluminium alloy, Thin-Walled Struct., 182, 10.1016/j.tws.2022.110233 He, 2022, Fatigue behavior of CFRP/Al adhesive joints — Failure mechanisms study using digital image correlation (DIC) technique, Thin-Walled Struct., 174, 10.1016/j.tws.2022.109075 Jiang, 2022, Controllable energy-absorption behaviors of the perforated CFRP tube with an adhesively bonded CFRP patch, Thin-Walled Struct., 181, 10.1016/j.tws.2022.110015 Jiang, 2022, Experimental study of bonded, bolted, and hybrid braided CFRP joints with different stacking sequences and lapping patterns, Thin-Walled Struct., 177, 10.1016/j.tws.2022.109408 Wang, 2021, Effects of adhesive property and thickness on the bond performance between carbon fiber reinforced polymer laminate and steel, Thin-Walled Struct., 158, 10.1016/j.tws.2020.107176 Kinloch, 1987 3M Website, https://multimedia.3~m.com/mws/media/282041O/3m-scotch-weld-structural-adhesive-film-af-163-2-af-163-3.pdf Last Accessed 29th September 2022. Quan, 2015, Effect of core–shell rubber (CSR) nano-particles on mechanical properties and fracture toughness of an epoxy polymer, Polymer, 66, 16, 10.1016/j.polymer.2015.04.002 Quan, 2017, Fracture behaviour of a rubber nano-modified structural epoxy adhesive: Bond gap effects and fracture damage zone, Int. J. Adhes. Adhes., 77, 138, 10.1016/j.ijadhadh.2017.05.001 D. Quan, R.A. Pearson, A. Ivankovic, Interaction of toughening mechanisms in ternary nanocomposites, Polym. Compos. 39 (10) 3482–3496, http://dx.doi.org/10.1002/pc.24368. Back, 2021, Synthesis of urethane-modified aliphatic epoxy using a greenhouse gas for epoxy composites with tunable properties: Toughened polymer, elastomer, and pressure-sensitive adhesive, Composites B, 222, 10.1016/j.compositesb.2021.109058 Srinivasan, 2020, Failure analysis of GFRP single lap joints tailored with a combination of tough epoxy and hyperelastic adhesives, Composites B, 200, 10.1016/j.compositesb.2020.108255 Deng, 2015, Thermoplastic/epoxy interactions and their potential applications in joining composite structures - A review, Composites A, 68, 121, 10.1016/j.compositesa.2014.09.027 Farooq, 2021, Effect of a dwell stage in the cure cycle on the interphase formation in a poly(ether imide)/high tg epoxy system, ACS Appl. Polym. Mater., 3, 6111, 10.1021/acsapm.1c00956 Turmel, 1997, Heterogeneous phase separation around fibres in epoxy/PEI blends and its effect on composite delamination resistance, Compos. Sci. Technol., 57, 1001, 10.1016/S0266-3538(96)00148-0 Tsiangou, 2021, On the sensitivity of ultrasonic welding of epoxy- to polyetheretherketone (PEEK)-based composites to the heating time during the welding process, Composites A, 144, 10.1016/j.compositesa.2021.106334 Tsiangou, 2019, Investigation on energy director-less ultrasonic welding of polyetherimide (PEI)- to epoxy-based composites, Composites B, 173, 10.1016/j.compositesb.2019.107014 Tsiangou, 2021, On the sensitivity of the ultrasonic welding process of epoxy- to polyetheretherketone (PEEK)-based composites to the welding force and amplitude of vibrations, Composites C, 5 Quan, 2022, Co-curing bonding of carbon fibre/epoxy composite joints with excellent structure integrity using carbon fibre/PEEK tapes, Compos. Sci. Technol., 227, 10.1016/j.compscitech.2022.109567 Quan, 2020, Significantly enhanced structural integrity of adhesively bonded PPS and PEEK composite joints by rapidly UV-irradiating the substrates, Compos. Sci. Technol., 199, 10.1016/j.compscitech.2020.108358 Quan, 2020, Rapid surface activation of carbon fibre reinforced PEEK and PPS composites by high-power UV-irradiation for the adhesive joining of dissimilar materials, Composites A, 137, 10.1016/j.compositesa.2020.105976 ASTM Standard D5528-13(2013), 2013 ASTM Standard D7905/D7905M, 2019 Bonnaud, 2002, Different parameters controlling the initial solubility of two thermoplastics in epoxy reactive solvents, J. Appl. Polym. Sci., 83, 1385, 10.1002/app.10029 Mathieson, 1996, Improved adhesion to polymers by UV/ozone surface oxidation, Int. J. Adhes. Adhes., 16, 29, 10.1016/0143-7496(96)88482-X Blackman, 2005, The determination of the mode II adhesive fracture resistance, GIIC, of structural adhesive joints: an effective crack length approach, Eng. Fract. Mech., 72, 877, 10.1016/j.engfracmech.2004.08.007 Palazzetti, 2017, Electrospun nanofibers as reinforcement for composite laminates materials - A review, Compos. Struct., 182, 711, 10.1016/j.compstruct.2017.09.021