On the Young's modulus of 304 L stainless steel thin films

Terrat, 1991, Structure and mechanical properties of reactively sputtered chromium nitrides, Surf Coat Technol, 45, 59, 10.1016/0257-8972(91)90206-C Wiiala, 1990, Improved erosion resistance of physical vapor deposition coated tin and zinc, Surf Coat Technol, 41, 191, 10.1016/0257-8972(90)90167-B Martin, 1986, Ion-based methods for optical thin film deposition, J Mater Sci, 21, 1, 10.1007/BF01144693 Rivière, 1998, Formation of hard coatings for tribological and corrosion protection by dynamic ion mixing, Surf Coat Technol, 108–109, 276, 10.1016/S0257-8972(98)00563-5 Weissmantel, 1979, Mechanical properties of hard carbon films, Thin Solid Films, 61, L5, 10.1016/0040-6090(79)90452-8 Pan, 1981, Residual compressive stress in sputter-deposited TiC films on steel substrates, Thin Solid Films, 78, 25, 10.1016/0040-6090(81)90414-4 Matuda, 1981, Internal stress, Young's modulus and adhesion energy of carbon films on glass substrates, Thin Solid Films, 81, 301, 10.1016/0040-6090(81)90514-9 Yu, 1991, Buckle formation in vacuum-deposited thin films, Thin Solid Films, 196, 229, 10.1016/0040-6090(91)90366-6 Eymery, 1994, Adhesion and debonding of bcc 304 L steel films, Mater Lett, 19, 137, 10.1016/0167-577X(94)90058-2 Goudeau, 1998, Ion-beam assisted deposition effect on residual stresses in 304 L stainless steel films, High Temp Mater Processes, 2, 431, 10.1615/HighTempMatProc.v2.i3.110 Chaı̈, 1981, One dimensional modelling of failure in laminated plates by delamination buckling, Int J Solids Struct, 17, 1069, 10.1016/0020-7683(81)90014-7 Talea, 1999, Atomic force microscopy observations of debonding in 304 L stainless steel thin films, Mater Lett, 41, 181, 10.1016/S0167-577X(99)00127-5 Goodman, 1991, Roles of the attractive and repulsive forces in atomic-force microscopy, Phys Rev B, 43, 4728, 10.1103/PhysRevB.43.4728 Stoney, 1909, The tension of metallic films deposited by electrolysis, Proc R Soc London, Ser A, 82, 172, 10.1098/rspa.1909.0021 Renault, 1998, Poisson's ratio measurement in tungsten thin films combining an X-ray diffractometer with in situ tensile tester, Appl Phys Lett, 73, 1952, 10.1063/1.122332 Idiri M, Goudeau Ph, Pelosin V, Boubeker B, Serrari A, Renault P-O. Elastic properties analysis of 304L stainless steel films in relation with their microstructure by combining X-ray diffraction and mechanical methods, in preparation. Branger, 1998, Internal stress analysis in thin metallic films by combining curvature and X-ray diffraction methods, High Temp Mater Processes, 2, 419, 10.1615/HighTempMatProc.v2.i3.100