Obtaining Al–Zr-Hf wire using electromagnetic casting, combined rolling-extrusion, and drawing

Chernavina, 2018, Global aluminum market: development trends, prospects and key problems, Molodoy uchenyy, 17, 206 Mansurov, 2020, Modified aluminum alloys of Al – Zr system for power transmission lines of Uzbekistan, Nonferrous Met., 49, 51 Gorbunov, 2015, The role and prospects of rare earth metals in the development of physical-mechanical characteristics and applications of deformable aluminum alloys, J. Sib. Fed. Univ. - Math. Phys., 8, 636 Belyy, 2012, Aluminium alloys for leads of cable products, Kabeli i Provoda, 1, 8 Belov, 2020, Structure and properties of Al-0.6%Zr-0.4%Fe-0.4%Si (wt.%) wire alloy manufactured by electromagnetic casting, J. Magnes. Alloy, 72, 1561 Belov, 2012, Comparative analysis of alloying additives as applied to the production of heat-resistant aluminum-base wires, Met. Sci. Heat Treat., 53, 455, 10.1007/s11041-012-9415-5 Belov, 2012, Effect of intermediate annealing on the resistivity and strength of wire from low-alloy aluminum alloys of the al–zr–fe–si system, Met. Sci. Heat Treat., 54, 165, 10.1007/s11041-012-9475-6 Ikeda, 1995, Effect of Si content on precipitation behavior of Al-Zr-Fe-Si alloy wire rods produced by Properzi process, J. Jpn. Inst. Light Metals, 45, 441, 10.2464/jilm.45.441 Czerwinski, 2020, Cerium in aluminum alloys, J. Mater. Sci., 55, 24, 10.1007/s10853-019-03892-z Czerwinski, 2020, On the Al-Al11Ce3 eutectic transformation in aluminum-cerium binary alloys, Materials, 13, 4549, 10.3390/ma13204549 Czerwinski, 2020, Critical Assessment 36: assessing differences between the use of cerium and scandium in aluminium alloying, Mater. Sci. Technol., 36, 255, 10.1080/02670836.2019.1702775 Mogucheva, 2012, Effect of the thermomechanical processing on microstructure and properties of an Al-Ce alloy, Mater. Sci. Forum, 706–709, 361, 10.4028/www.scientific.net/MSF.706-709.361 Sidelnikov, 2020, Modeling the process of obtaining bars from aluminum alloy 01417 by combined rolling-extruding method with application of the deform-3D complex, Key Eng. Mater., 861, 540, 10.4028/www.scientific.net/KEM.861.540 Sidelnikov, 2019, Development and research of technology for producing electrotechnical wire from alloys of the Al – REM system, obtained with the application of combined machining methods, Tsvetnye Met., 9, 63, 10.17580/tsm.2019.09.10 Sidelnikov, 2019, Comparative analysis of properties of wires from alloys of al-rem system, obtained using the methods of continuous extrusion, Int. J. Eng. Adv. Technol., 8, 300 Sidelnikov, 2020, Development of combined machining modes, investigation of mechanical properties and structure of deformed semi-finished products from alloy 01417, Mater. Sci. Forum, 992, 498, 10.4028/www.scientific.net/MSF.992.498 Sidel’nikov, 2015, Research of rheological properties of electrotechnical wire rod of aluminum alloys with transition and rare earth metals obtained by the method of continious casting and metal forming, Bull. South Ural State Univ. Ser.: Metall., 15, 89 Sidelnikov, 2021, Investigation structure and properties of wire from the alloy of AL-REM system obtained with the application of casting in the electromagnetic mold, combined rolling-extruding, and drawing, Int. J. Adv. Manuf. Technol., 114, 2633, 10.1007/s00170-021-07054-x Timofeev, 2022, Production of aluminum alloy onboard wire with a high content of rare-earth metals produced using electromagnetic crystallization, Tsvetnye Met., 1 Sidelnikov, 2021, Experimental and analytical assessment of the power parameters of the combined rolling-extruding process using a round billet from alloy 01417 obtained using an electromagnetic mold, Key Eng. Mater., 887, 300, 10.4028/www.scientific.net/KEM.887.300 2018 Mondolfo, 1979 Nokhrin, 2022, Investigation of thermal stability of microstructure and mechanical properties of bimetallic fine-grained wires from al–0.25%zr–(sc,hf) alloys, Materials, 15, 185, 10.3390/ma15010185 Rokhlin, 2010, Investigation of the Al-rich part of the Al-Zr-Hf phase diagram for solid state, J. Phase Equilibria Diffus., 31, 504, 10.1007/s11669-010-9778-5 Zhou, 2022, Mechanical and electrical properties of Y-containing Al-Zr heat-resistant alloy produced by dynamic ECAE process, J. Wuhan Univ. Technol.-Materials Sci. Ed., 37, 123, 10.1007/s11595-022-2508-0 Chen, 2021, Effect of Zr content on aging precipitation and properties of Al-Zr alloy, Jinshu Rechuli/Heat Treat. Met., 46, 47 Zhou, 2021, Effect of annealing process on microstructure and properties of Al-Zr-Er high conductivity aluminum alloy, Jinshu Rechuli/Heat Treat. Met., 46, 108 Alvarez-antolin, 2021, Decrease in electrical resistivity below 28 nΩm by aging in hyperperitectic al-zr alloys treated at high temperatures, Metals, 11, 1171, 10.3390/met11081171 Lefebvre, 2021, Vacancy release upon heating of an ultrafine grain Al-Zr alloy: in-situ observations and theoretical modeling, J. Alloys Compd., 862, 158455, 10.1016/j.jallcom.2020.158455 Orlova, 2018, Influence of severe plastic deformation on microstructure, strength and electrical conductivity of aged Al-0.4Zr(wt.%) alloy, Rev. Adv. Mater. Sci., 55, 92, 10.1515/rams-2018-0032 Orlova, 2019, Effect of annealing on microstructure, strength and electrical conductivity of the pre-aged and HPT-processed Al-0.4Zr alloy, J. Alloys Compd., 784, 41, 10.1016/j.jallcom.2018.12.324 Latynina, 2019, The effect of hardening by annealing in ultrafine-grained Al–0.4Zr alloy: influence of Zr microadditives, Philos. Mag. A, 99, 2424, 10.1080/14786435.2019.1631501 Chen, 2021, Effects of Y Addition on the microstructure and properties of Al-Zr alloy, Tezhong Zhuzao Ji Youse Hejin/Special Casting and Nonferrous AlloysTezhong Zhuzao Ji Youse Hejin/Special Cast. Nonferrous Alloys, 41, 68 Mohammadi, 2021, Developing age-hardenable Al-Zr alloy by ultra-severe plastic deformation: significance of supersaturation, segregation and precipitation on hardening and electrical conductivity, Acta Mater., 203, 116503, 10.1016/j.actamat.2020.116503 Bespalov, 2020, Understanding the effect produced by combined processing and drawing on the structure and properties of conductive semi-finished products made of Al – Zr alloys, Tsvetnye Met., 8, 68, 10.17580/tsm.2020.08.09 Bespalov, 2020, Simulation of ingotless rolling-extruding of rods from alloy of Al-Zr system and investigating into their properties, Key Eng. Mater., 837, 3, 10.4028/www.scientific.net/KEM.837.3 Zhang, 2019, Double-shell structure of Al 3 (Zr,Sc)precipitate induced by thermomechanical treatment of Al–Zr–Sc alloy cable, J. Rare Earths, 37, 668, 10.1016/j.jre.2018.08.009 Cadirli, 2015, Effect of heat treatments on the microhardness and tensile strength of Al–0.25 wt.% Zr alloy, J. Alloys Compd., 632, 229, 10.1016/j.jallcom.2015.01.193 Erol, 2013, Tensile strength of Al-Zr overhead line conductors, Mater. Sci. Forum, 765, 793, 10.4028/www.scientific.net/MSF.765.793 Knipling, 2011, Ambient and high temperature mechanical properties of isochronally aged Al–0.06 Sc, Al–0.06 Zr, and Al–0.06 Sc–0.06 Zr Alloys (at.%), Acta Mater., 59, 943, 10.1016/j.actamat.2010.10.017 Li, 2012, 73 Chao, 2014, Effect of Zr and Sc on mechanical properties and electrical conductivities of Al wires, Trans. Nonferrous Met. Soc. China, 24, 3164, 10.1016/S1003-6326(14)63456-7 Belov, 2015, Effect of Zr additions and annealing temperature on electrical conductivity and hardness of hot rolled Al sheets, Trans. Nonferrous Metals Soc. China, 25, 2817, 10.1016/S1003-6326(15)63907-3 Guan, 2017, A high-strength, ductile Al-0.35Sc-0.2Zr alloy with good electrical conductivity strengthened by coherent nanosized-precipitates, J. Mater. Sci. Technol., 33, 215, 10.1016/j.jmst.2017.01.017 Zhang, 2019, Relationship between electrical resistivity and Al3(Zr,Sc) core–shell dispersoids of Al–Zr–Sc electrical transmission cable: modeling and experimental results, Elec. Power Syst. Res., 168, 1, 10.1016/j.epsr.2018.11.004 Kang, 2017, Effects of homogenization treatments on the microstructure evolution, microhardness and electrical conductivity of dilute Al–Sc–Zr–Er alloys, J. Alloys Compd., 704, 683, 10.1016/j.jallcom.2017.02.043 Knipling, 2010, Precipitation evolution in Al–0.1Sc, Al–0.1Zr and Al–0.1Sc–0.1Zr (at.%) alloys during isochronal aging, Acta Mater., 58, 5184, 10.1016/j.actamat.2010.05.054 Farkoosh, 2019, Microstructure and mechanical properties of an al-zr-er high temperature alloy microalloyed with tungsten, Miner. Met. Mater. Ser., 379 Kahveci, 2019, Measurement and prediction of the thermal and electrical conductivity of Al-Zr overhead line conductors at elevated temperatures, Mater. Res., 22, 10.1590/1980-5373-mr-2018-0513 Kalinenko, 2018, Properties and structure of Al-Zr-Fe-Si alloy after thermomechanical treatment, AIP Conf. Proc., 2051, 10.1063/1.5083360 Jiang, 2018, Manipulating nanostructure to simultaneously improve the electrical conductivity and strength in microalloyed Al-Zr conductors, Sci. Rep., 8, 6202, 10.1038/s41598-018-24527-4 Yue, 2018, Effects of hot compression deformation temperature on the microstructure and properties of Al–Zr–La alloys, Int. J. Miner. Metall., 25, 236, 10.1007/s12613-018-1566-y De Luca, 2018, Microstructure and mechanical properties of a precipitation-strengthened Al-Zr-Sc-Er-Si alloy with a very small Sc content, Acta Mater., 144, 80, 10.1016/j.actamat.2017.10.040 Souza, 2018, Precipitation hardening in dilute Al–Zr alloys, J. Mater. Res. Technol., 7, 66, 10.1016/j.jmrt.2017.05.006 Alabin, 2017, Effect of annealing on the electrical resistivity and strengthening of low-alloy alloys of the Al – Zr – Si system, Met. Sci. Heat Treat., 58, 527, 10.1007/s11041-017-0048-6 Du, 2015, Cluster characteristics and physical properties of binary Al-Zr intermetallic compounds from first principles studies, Comput. Mater. Sci., 103, 170, 10.1016/j.commatsci.2015.03.039 Timofeev Simlandi, 2013, Studies on Transport phenomena during continuous casting of an Al-alloy in presence of electromagnetic stirring, Trans. Indian Inst. Met., 66, 141, 10.1007/s12666-012-0205-y Tani, 2013, Electromagnetic casting technique for slab casting, Nippon Steel Tech. Rep., 104, 56 Zuo, 2014, Effect of electromagnetic field on microstructure and macrosegregation of flat ingot of 2524 aluminium alloy, Trans. Nonferrous Metals Soc. China, 24, 2408, 10.1016/S1003-6326(14)63364-1 Avdulov, 2017, Distinctive features of the structure and characteristics of long-length light gauge ingots from aluminium alloys, cast into electromagnetic crystallizer, Tsvetnye Met., 7, 73, 10.17580/tsm.2017.07.12 Timofeev, 2016, Theoretical design fundamentals for MHD stirrers for molten metals, Magnetohydrogynamics, 52, 495, 10.22364/mhd.52.4.6 Timofeev, 2017, Analysis of transverse edge in MHD-stirrer of liquid metals, Magnetohydrogynamics, 53, 521, 10.22364/mhd.53.3.9 Pervukhin, 2019, Mathematical modeling of MHD processes in the casting of aluminum alloys in electromagnetic mold, IOP Conf. Ser. Mater. Sci. Eng., 643, 10.1088/1757-899X/643/1/012063 Fastikovskiy, 2018, Improvement of continuous forming the "Conform" method, IOP Conf. Ser. Mater. Sci. Eng., 411 Larin, 2021, Simulation of the process of extruding a bar billet into a cylindrical extrusion die with active friction, J. Phys. Conf., 1753 Jensrud, 2012, High strength aluminium alloys extrusions - a review of the thermo-mechanical-process in high performance profile manufacturing, Key Eng. Mater., 491, 11, 10.4028/www.scientific.net/KEM.491.11 Raab, 2014, Development and research of method CCRE-SPD for obtaining aluminum semi-finished products of high quality, J. Sib. Fed. Univ. - Math. Phys., 3, 309 Raab, 2016, The study of the strained state of the long-length aluminum billet obtained by a new method - multi-ECAP-conform, Mater. Sci. Forum, 870, 603, 10.4028/www.scientific.net/MSF.870.603 Wang, 2021, Simulation and experimental research on continuous extrusion flow characteristics of rod billet, Suxing Gongcheng Xuebao/J. Plast. Eng., 28, 52 Skuratov, 2021, Numerical analysis of the non-stationary thermal state of the tool in the combined casting and extrusion of aluminum alloy, Int. J. Adv. Manuf. Technol., 117, 295, 10.1007/s00170-021-07634-x Loginov, 2017, Ivanov E.V., Initiation of noncontact deformation zones in porous bar rolling-extrusion process. Forging and Stamping Production, Material Working by Pressure, 3, 38 Zagirov, 2016, Computational-and-experimental evaluation of the implementation condition of combined rolling–pressing using the power balance method, Russ. J. Non-Ferrous Metals, 57, 95, 10.3103/S1067821216020127 Sidelnikov, 2015, Features of structure formation and properties of metal during high-speed crystallization-deformation and modification of aluminum alloys: collective monograph, Krasnoyarsk: SibFU. Gorokhov, 2013, Fundamentals of designing processes for continuous extrusion of metals: monograph, Krasnoyarsk: SibFU. Sidelnikov, 2018, Application and research twin roll casting-extruding process for production longish deformed semi-finished products from aluminum alloys, Mater. Sci. Forum, 918, 13, 10.4028/www.scientific.net/MSF.918.13 Ji, 2020, A review of the twin-roll casting process for complex section products, ISIJ Int., 60, 2165, 10.2355/isijinternational.ISIJINT-2020-149 Usynina Voroshilov, 2021, Development of combined rolling-extruding modes for producing longish deformed semi-finished products from aluminum alloy with low cerium content, Key Eng. Mater., 88, 262, 10.4028/www.scientific.net/KEM.887.262 Sidelnikov