Oblique and Herringbone Buckling Analysis of Steel Strip by Spline FEM
Tóm tắt
The tilted waves in steel strip during rolling and leveling of sheet metal can be classified into two different types of buckling, oblique and herringbone buckling, respectively. Numerical considerations of oblique and herringbone buckling phenomena are dealt with by the spline finite element method (FEM). It is pointed out that the shear stress due to residual strains caused by the rolling process or applied non-uniform loading is the main reason of oblique and herringbone buckle. According to the analysis of stress distribution in plane, the appropriate initial strain patterns are adopted and the corresponding buckling modes are calculated by the spline FEM. The developed numerical model provides an estimation of buckling critical load and wave configuration.
Tài liệu tham khảo
Fischer F D, Rammerstorfer F G. Buckling Phenomena Related to Rolling and Levelling of Sheet Metal [J]. International Journal of Mechanical Sciences, 2000, 42(10), 1887.
Jacques N, Elias A, Potier-Ferry M, et al. Buckling and Wrinkling During Strip Conveying in Processing Lines [J]. Journal of Materials Processing Technology, 2007, 190(1): 33.
Charles W Bert, Krishna K, Devarakonda. Buckling of Rectan gular Plates Subjected to Nonlinearly Distributed In-Plane Loading [J]. International Journal of Solids and Structures, 2003, 40(16): 4097.
Kang Jae-hoon, Arthur W Leissa. Exact Solutions for the Buckling of Rectangular Plates Having Linearly Varying In-Plane Loading on Two Opposite Simply Supported Edges [J]. International Journal of Solids and Structures, 2005, 42(14): 4220.
Tornita Y, Shao H. Buckling Behavior in Thin Sheet Metal Subjected to Nonuniform Membrane-Type Deformation [M]. Amsterdam; Elsevier Science, 1993.
Roberts W L. Cold Rolling of Steel [M]. New York: Dekker, 1978.
Komori K. Analysis of Herring-Bone Mechanism in Sheet Rolling [J]. Journal of Materials Processing Technology, 1996, 60 (3): 377.
Zhou Z, Thomson P F, Lam Y C, et al. Predicting Quarter-Buckling and Herringbone Buckling in Rolled Strip [J]. J Mechanical Engineering Science, Part C, 2007, 22(2): 143.
CHANG Tie-zhu. Deformation of Herringbone Buckling and Transverse Buckling for Thin and Wide Strip [D]. Beijing: University of Science and Technology Beijing, 2009 (in Chinese).
DAI Jiang-bo, ZHANG Qing-dong, CHANG Tie-zhu. FEM Analysis of Large Thermo-Deflection of Strips Being Processed in a Continuous Annealing Furnace [J]. Journal of University of Science and Technology Beijing, 2007, 14(6): 580 (in Chinese).
CHEN Yan-zhou, GUO Yao-jie. Theoretical Analysis and Finite Element Computing for Rectangular Plates Bucking Under Shear Load [J]. Journal of Chongqing Jianzhu University, 2009, 30(1): 24 (in Chinese).
SHEN Peng-cheng. The Spline Finite Element Method in Structural Analysis [M]. Beijing: Water Conservancy and Hydropower Publishing House, 1992 (in Chinese).
De Boor C. A Practical Guide of Splines [M]. New York: Springer, 2001.
Moon B S. An Explicit Solution for the Cubic Spline Interpolation for Functions of a Single Variable [J]. Applied Mathematics and Computation, 2001, 117(3): 251.
QIN Jian. The Elastic-Plastic Spline Finite Element Method and Application in Strip Buckling [D]. Beijing: Peking University, 2009 (in Chinese).
CHANG Tie-zhu, ZHANG Qing-dong, BAI Jian, et al. Mechanism of Generating Edge Buckling in Galvanized Strips With Mild Character During Coiling Process and Its Solution [J]. Journal of University of Science and Technology Beijing, 2008, 30(2): 178 (in Chinese).