Oak particles size effects on viscous-elastic properties of wood polyester resin composite submitted to ultraviolet radiation
Tóm tắt
Từ khóa
Tài liệu tham khảo
Azwa ZN, Yousif BF, Manalo AC, Karunasena W (2013) A review on the degradability of polymeric composites based on natural fibres. Mater Des 47:424–442
Bagherpour S (2012) Fibre Reinforced Polyester Composites, Hosam El-Din M. Saleh (ed), Published: September 26, https://doi.org/10.5772/48697
Beg MDH, Pickering KL (2008) Accelerated weathering of unbleached and bleached Kraft wood fibre reinforced polypropylene composites. Polym Degrad Stab 93:1939–1946
Benini KCCC, Voorwald HJC, Cioffi MOH (2011) Mechanical properties of HIPS/sugarcane bagasse fiber composites after accelerated weathering. Proced Eng 10:3246–3251
Bismarck A, Baltazar-Y-Jimenez A, Sarlkakis K (2006) Green composites as Panacea? Socio-economic aspects of green materials. Environ Dev Sustain 8:445–463
Bodîrlău R, Teaca CA, Spiridon I (2009) Preparation and characterization of composites comprising modified hardwood and wood polymers/poly (vinyl chloride). BioResources 4(4):1285–1304
Butylina S, Hyvärinen M, Kärki T (2012) A study of surface changes of wood-polypropylene composites as the result of exterior weathering. Polym Degrad Stab 97:337–345
Cerbu C, Curtu I, Ciofoaia V, Rosca IC, Hanganu LC (2010) Effects of the wood species on the mechanical characteristics in case of some E-glass fibers/wood flour/polyester composite materials. Mater Plast 47:109–114
Chaochanchaikul K, Jayaraman K, Rosarpitak V, Sombatsompop N (2012) Influence of lignin content on photodegradation in wood/HDPE composites under UV weathering. BioResources 7(1):38–55
Cheng F, Hu Y, Li L (2015) Interfacial properties of glass fiber/unsaturated polyester resin/poplar wood composites prepared with the prepreg/press process. Fiber Polym 16(4):911–917
Cipriano TF, Nazareth da Silva AL et al (2013) Rheological and morphological properties of composites based on polylactide and talc. J Mater Sci Eng B 3:695–699
Cogulet A, Blanchet P, Landry V (2016) Wood degradation under UV irradiation: a lignin characterization. J Photochem Photobiol B Biol 158:184–191
Coșniță M, Cazan C, Duta A (2014) Interfaces and mechanical properties of recycled rubber polyethylene terephthalate wood composites. J Compos Mater 48(6):683–694
Darie RN, Bercea M, Kozlowski M, Spiridon I (2011) Evaluation of properties of ldpe/oak wood composites exposed to artificial ageing. Cell Chem Technol 45:127–135
Essabir H, Bensalah MO, Rodrigue D, Bouhfid R, Qaiss A (2016) Structural, mechanical and thermal properties of bio-based hybrid composites from waste coir residues: fibers and shell particles. Mech Mater 93:134–144
Gozdecki C, Wilczynski A (2015) Effect of wood particle size and test specimen size on mechanical and water resistance properties of injected wood-high density polyethylene composite. Wood Fiber Sci 47(4):1–10
Guo G, Shi Q, Luo Y, Fan R, Zhou L, Qian Z, Yu J (2014) Preparation and ageing-resistant properties of polyester composites modified with functional nanoscale additives. Nanoscale Res Lett 9:215
Kim JP, Yoon TH, Mun SP, Rhee JM, Lee JS (2006) Wood–polyethylene composites using ethylene–vinyl alcohol copolymer as adhesion promoter. Bioresour Technol 97:494–499
Matuana LM, Kamdem DP (2002) Accelerated ultraviolet weathering of PVC/wood fibre composites. Polym Eng Sci 42:1657–1666
Matuana LM, Jin Sh, Stark N (2011) Ultraviolet weathering of HDPE/wood-flour composites coextruded with a clear HDPE cap layer. Polym Degrad Stab 96:97–106
Maxwell AS, Broughton WR, Dean G, Sims GD (2005) Review of accelerated ageing methods and lifetime prediction techniques for polymeric materials. NPL Report DEPC MPR016. National Physics Laboratory, Teddington, Middlesex, United Kingdom, Queen’s Printer for Scotland
Ndiaye D, Diop B, Thiandoume C, Fall PA, Farota AK, Tidjani A (2012) Morphology and Thermo Mechanical Properties of Wood/Polypropylene Composites. Polypropylene, INTECH. https://doi.org/10.5772/3614
Ndiaye D, Verney V, Askanaian H, Commereuc S, Tidjani A (2013) Morphology, thermal behaviour and dynamic rheological properties of wood polypropylene composites. Mater Sci Appl 4:730–738
Peng Y, Cao J (2016) Photochemical process of wood-thermoplastic composites. In: Rosu D (ed) Photochemical behaviour of multicomponent polymeric-based materials. Springer, Berlin, pp 291–346
Peng Y, Liu R, Cao J (2014) Effects of antioxidants on photodegradation of wood flour/polypropylene composites during artificial weathering. BioResources 9(4):5817–5830
Pepper T (2016) Polyester Resin. Engineering Materials Handbook. http://home.engineering.iastate.edu/~mkessler/MatE454/Constituent%20Materials%20Chapters%20from%20ASM%20Handbook/%285%29%20Polyester%20Resins.pdf Accessed 10.10.2016
Pothan LA, Oommen Z, Thomas S (2003) Dynamic mechanical analysis of banana fiber reinforced polyester composites. Compos Sci Technol 63:283–293
Ratanawilai T, Nakawirot K, Deachsrijan A, Homkhiew C (2014) Influence of wood species and particle size on mechanical and thermal properties of wood polypropylene composites. Fiber Polym 15(10):2160–2168
Romanzini D, Lavoratti A, JrHL Ornaghi, Amico SC, Zattera AJ (2013) Influence of fiber content on the mechanical and dynamic mechanical properties of glass/ramie polymer composites. Mater Des 47:9–15
Saha P, Manna S, Roy D, Kim MC, Chowdhury S et al (2014) Effect of photodegradation of lignocellulosic fibers transesterified with vegetable oil. Fiber Polym 15(11):2345–2354
Stanciu MD, Curtu I, Groza M, Savin A (2016) The evaluation of rheological properties of composites reinforced with hemp subjected to photo and thermal degradation. CONAT 2016 International Congress of Automotive and Transport Engineering (A. Chiru and N. Ispas Eds.). https://doi.org/10.1007/978-3-319-45447-4_62
Stark NM, Berger MJ (1997) Effect of particle size on properties of wood-flour reinforced polypropylene composites. In: The fourth international conference on woodfiber-plastic composites, May 12–14, Madison, Wisconsin
Teacă CA, Roșu D, Bodîrlău R, Roșu L (2013) Structural changes in wood under artificial UV light irradiation determined by FTIR spectroscopy and color measurements – a brief review. BioResources 8(1):1478–1507
Terciu OM, Curtu I (2012) New hybrid lignocellulosic composite made of epoxy resin reinforced with flax fibres and wood sawdust. Mater Plast 49(2):114–117
Varganici CD, Rosu D, Rosu L (2016) Life-time prediction of multicomponent polymeric materials. In: Rosu D (ed) Photochemical behaviour of multicomponent polymeric-based materials. Springer, Berlin, pp 227–258