Nội dung được dịch bởi AI, chỉ mang tính chất tham khảo
TỐI ƯU HÓA PHÂN LOẠI CÁT TRONG VIỆC LẮP ĐẶT SỬ DỤNG CHẤT THẢI THÉP
Tóm tắt
Mặc dù cát có chất lượng thấp và rất mịn với hàm lượng cao của các hạt đất sét và bụi được sử dụng trong việc chuẩn bị hỗn hợp lấp đất xi măng, việc tối ưu hóa phân loại của chúng bằng cách thêm cát thô từ quặng luyện kim kích thước 0–5 mm mà không cần xử lý sơ bộ là rất hợp lý về mặt công nghệ và kinh tế. Các mối quan hệ giữa mô-đun kích thước, diện tích riêng của hạt và hàm lượng hạt đất sét/bụi trong cát và tỉ lệ phần trăm của xỉ trong hợp chất thô được xác định. Kết quả cho thấy rằng với tỷ lệ phần trăm của xỉ trong hợp chất thô tăng lên, nhu cầu nước giảm do mô-đun kích thước của hợp chất thô cao hơn và do hàm lượng hạt đất sét trong đó giảm. Điều này cho phép sản xuất hỗn hợp lấp đất xi măng với mức tiêu thụ xi măng giảm trong khi vẫn đảm bảo sức mạnh và tính lỏng của hỗn hợp.
Từ khóa
#tối ưu hóa #phân loại cát #chất thải luyện kim #hỗn hợp lấp đất xi măng #hạt đất sét #tỷ lệ phần trăm xỉTài liệu tham khảo
Russian Federation State Standard GOST 8736-2014, Moscow: Standartinform, 2019.
Bazhenov, Yu.M., Tekhnologiya betona (Technology of Concrete), Moscow: ASV, 2002.
Bazhenov, Yu.M. and Kharchenko, A.I., Fine-Grain Backfill Concrete Using Low-Grade Sand, Nauch.-Tekhn. Vestn. Povolzhiya, 2012, no. 5, pp. 86–88.
Kosach, A.F., Influence of Specific Area of River Sand Particles on Physical and Mechanical Properties of Fine-Grain Concrete,Vestn. YuGU, 2012, no. 2 (25), pp. 34–36.
Kudryakov, A.I., Anikanova, L.A., Kopanitsa, N.O., and Gerasimov, A.V., Effect of Grain Sizes and Types of Aggregates on Properties of Mortars, Stroit. Materialy, 2001, no. 1, pp. 28–29.
Mongush, S.Ch., Effect of Properties of Fine Aggregates on Quality of Concretes, Vestn. TuvGU, 2011, no. 3, pp. 4–8.
Khozin, V.G., Morozov, N.M., and Borovskikh, I.V., Optimization of Grain Size Composition of Sand for Fine-Grain Concrete Production,Izv. KazGASU, 2008, no. 2 (10), pp. 121–124.
Montyanova, A.N., Garkavi, M.S., and Kosova, N.S., Features and Efficiency of Additives in Backfill Mixtures, GIAB, 2009, no. 9, pp. 287–295.
Kalmykov, V.N. and Slashchilin, I.T., Applicability of Compound Binder Made of Cement and Granulated Blast-Furnace Slag of Severstal in Backfill Mixtures in Heavy-Mineral-Sand Operations at Yarega Mining and Chemical Works, GIAB, 2005, no. 1, pp. 182–187.
Vinogradov, S.A. and Kutuzov, V.I., Technology of Formulation and Preparation of Backfill Mixture for Yrage Mine,Gornyi Zhurnal, 1991, no. 10, pp. 31–35.
Gurevich, B.I. and Tyukavkina, V.V., Binders Made of Nonferrous Metallurgy Slag, Tsvet. Metallurg., 2007, no. 4, pp. 10–16.
Klassen, V.K., Morozova, I.A., Borisov, I.N., and Mandrikova, O.S., Energy Saving and Increasing the Strength of Cement Using Steel Slag as a Raw Material Component, Middle-East J. of Sci. Res., 2013, vol. 18, no. 11, pp. 1597–1601.
Krupnik, L.A., Shaposhnik, Yu.N., Shaposhnik, S.N., Nurshaiykova, G.T., and Tungushbaeva, Z.K., Technology of Backfill Preparation Based on Cement-and-Slag Binder in Orlov Mine, J. Min. Sci., 2017, vol. 53, no. 1, pp. 77–83.
Algermissen, D and Ehrenberg, A., Applicability of Electric Furnace Steelmaking Slag as a Hydraulic Binder, Chern. Metally, 2018, no. 9, pp. 21–27.
Deng, D.Q., Liu, L., Yao, Z.L., Song, K.I., and Lao, D.Z., A Practice of Ultra-Fine Tailings Disposal as Filling Material in a Gold Mine, J. Environ. Manage., 2017, vol. 196, pp. 100–109.
Ke, X., Zhou, X., Wang, X., Wang, T., Hou, H., and Zhou, M., Effect of Tailings Fineness on the Pore Structure Development of Cemented Paste Backfill, Constr. Build. Mater., 2016, vol. 126, pp. 345–350.
USSR State Standard GOST 8735-88, Moscow: Standartinform, 2019.
Russian Federation State Standard GOST 29234.12-91, Moscow: Standartinform, 2019.