Numerical study of the effect of curved turbulators on the exergy efficiency of solar collector containing two-phase hybrid nanofluid

Bhattacharyya, 2020, Heat transfer and exergy analysis of solar air heater tube with helical corrugation and perforated circular disc inserts, J Therm Anal Calorim Ahmadi, 2019, Utilization of hybrid nanofluids in solar energy applications: a review, Nano-Structures & Nano-Objects, 20, 10.1016/j.nanoso.2019.100386 Parsa, 2021, Reliability of thermal desalination (solar stills) for water/wastewater treatment in light of COVID-19 (novel coronavirus “SARS-CoV-2”) pandemic: what should consider?, Desalination, 512, 10.1016/j.desal.2021.115106 Menni, 2020, Combination of baffling technique and high-thermal conductivity fluids to enhance the overall performances of solar channels, Eng Comput S.M. Parsa, D. Javadi Y, A. Rahbar, M. Majidniya, S. Aberoumand, Y. Amidpour, M. Amidpour, Experimental assessment on passive solar distillation system on Mount Tochal at the height of 3964 m: Study at high altitude, Desalination, 466 (2019) 77-88. Menni, 2020, Numerical calculations of the thermal-aerodynamic characteristics in a solar duct with multiple V-baffles, Eng Appl Comput Fluid Mech, 14, 1173 Parsa, 2020, Experimental investigation at a summit above 13,000ft on active solar still water purification powered by photovoltaic: a comparative study, Desalination, 476, 10.1016/j.desal.2019.114146 Karimi, 2018, Numerical study on thermal performance of an air-cooled heat exchanger: Effects of hybrid nanofluid, pipe arrangement and cross section, Energy Convers Manage, 164, 615, 10.1016/j.enconman.2018.03.038 Ahmadi, 2020, Prediction of the pressure drop for CuO/(Ethylene glycol-water) nanofluid flows in the car radiator by means of Artificial Neural Networks analysis integrated with genetic algorithm, Phys A, 546, 10.1016/j.physa.2019.124008 Mansoury, 2020, Heat transfer and flow characteristics of Al2O3/water nanofluid in various heat exchangers: experiments on counter flow, Heat Transfer Eng, 41, 220, 10.1080/01457632.2018.1528051 Menni, 2021, Effects of in-line deflectors on the overall performance of a channel heat exchanger, Eng Appl Comput Fluid Mech, 15, 512 Pordanjani, 2019, An updated review on application of nanofluids in heat exchangers for saving energy, Energy Convers Manage, 198 Kahani, 2020, Application of M5 tree regression, MARS, and artificial neural network methods to predict the Nusselt number and output temperature of CuO based nanofluid flows in a car radiator, Int Commun Heat Mass Transfer, 116, 10.1016/j.icheatmasstransfer.2020.104667 Yan, 2020, Effect of U-shaped absorber tube on thermal-hydraulic performance and efficiency of two-fluid parabolic solar collector containing two-phase hybrid non-Newtonian nanofluids, Int J Mech Sci, 185, 10.1016/j.ijmecsci.2020.105832 Ramezanizadeh, 2019, A review on the utilized machine learning approaches for modeling the dynamic viscosity of nanofluids, Renew Sustain Energy Rev, 114, 10.1016/j.rser.2019.109345 Arefmanesh, 2016, Mixed convection heat transfer in a CuO–water filled trapezoidal enclosure, effects of various constant and variable properties of the nanofluid, Appl Math Model, 40, 815, 10.1016/j.apm.2015.10.043 A. Aghaei, G. A. Sheikhzadeh, H. Ehteram, M. Hajiahmadi, Numerical Investigation of Mixed Convection Fluid Flow, Heat Transfer and Entropy Generation in Triangular Enclosure Filled with a Nanofluid, Journal of Applied Fluid Mechanics, Vol. 9, No. 1, pp. 147-156, 2016. Mohammad Hemmat Esfe, Ali Akbar Abbasian Arani, Wei-Mon Yan, Hamidreza Ehteram, Alireza Aghaie, Masoud Afrand, Natural convection in a trapezoidal enclosure filled with carbon nanotube–EG–water nanofluid, International Journal of Heat and Mass Transfer, Volume 92, January 2016, Pages 76-82. H. R. Ehteram, A. A. Abbasian Arani, G. A. Sheikhzadeh, A. Aghaei, A. R. Malihi, The effect of various conductivity and viscosity models considering Brownian motion on nanofluids mixed convection flow and heat transfer, Trans. Phenom. Nano Micro Scales, 4(1): 19-28, Winter - Spring 2016. Knissel, 2018, Energy efficient heat exchanger for ventilation systems, Energy Build, 159, 246, 10.1016/j.enbuild.2017.10.091 Chen, 2020, Experimental investigation on heat transfer characteristics of various nanofluids in an indoor electric heater, Renew Energy, 147, 1011, 10.1016/j.renene.2019.09.036 Yang, 2020, Heat transfer and flow optimization of a novel sinusoidal minitube filled with non-Newtonian SiC/EG-water nanofluids, Int J Mech Sci, 168, 10.1016/j.ijmecsci.2019.105310 Sheikholeslami, 2020, Energy and entropy evaluation and two-phase simulation of nanoparticles within a solar unit with impose of new turbulator, Sustain Energy Technol Assess, 39 Bellos, 2018, Enhancing the performance of parabolic trough collectors using nanofluids and turbulators, Renew Sustain Energy Rev, 91, 358, 10.1016/j.rser.2018.03.091 Babaei Mahani, R., Kadhim Hussein, A., Talebizadehsardari, P., Thermal–hydraulic performance of hybrid nano‐additives containing multiwall carbon nanotube‐Al2O3 inside a parabolic through solar collector with turbulators, Mathematical Mwthods in the Applied Sciences, https://doi.org/10.1002/mma.6842. Chang, 2007, Turbulent heat transfer and pressure drop in tube fitted with serrated twisted tape, Int J Therm Sci, 46, 506, 10.1016/j.ijthermalsci.2006.07.009 S. Eiamsa-ard K. Wongcharee S. Sripattanapipat 3-D Numerical simulation of swirling flow and convective heat transfer in a circular tube induced by means of loose-fit twisted tapes International Communications in Heat and Mass Transfer 36 2009 947–955 (n.d.). He, 2020, Effect of twisted-tape inserts and nanofluid on flow field and heat transfer characteristics in a tube, Int Commun Heat Mass Transfer, 110, 10.1016/j.icheatmasstransfer.2019.104440 S. Chokphoemphun M. Pimsarn C. Thianpong Pongjet Thermal performance of tubular heat exchanger with multiple twisted-tape inserts Chin. J. Chem. Eng. 23 2015 755–762 (n.d.). M.M.K. Bhuiya, A.K. Azad, M.S.U. Chowdhury, M. Saha. “Heat transfer augmentation in a circular tube with perforated double counter twisted tape inserts.” Int. Communic. Heat Mass Transf. 74 (2016) 18–26. (n.d.). Waghole, 2014, Experimental investigations on heat transfer and friction factor of silver nano fluid in absorber/receiver of parabolic trough collector with twisted tape inserts, Energy Procedia, 45, 558, 10.1016/j.egypro.2014.01.060 Reddy, 2015, Experimental investigation of porous disc enhanced receiver for solar parabolic trough collector, Renew Energy, 77, 308, 10.1016/j.renene.2014.12.016 Reddy, 2008, Numerical investigation of energy efficient receiver for solar parabolic trough concentrator, Heat Transfer Eng, 29, 961, 10.1080/01457630802125757 Jaramillo, 2016, Parabolic trough solar collector for low enthalpy processes: an analysis of the efficiency enhancement by using twisted tape inserts, Renew Energy, 93, 125, 10.1016/j.renene.2016.02.046 Abdollahzadeh, 2018, Stagnation point flow of nanofluids towards stretching sheet through a porous medium with heat generation”, J Nanofluids, 7, 1, 10.1166/jon.2018.1431 Alireza Aghaei, Hossein Khorasanizadeh and Ghanbar Ali Sheikhzadeh, (2019), “A numerical study of the effect of the magnetic field on turbulent fluid flow, heat transfer and entropy generation of hybrid nanofluid in a trapezoidal enclosure”, THE EUROPEAN PHYSICAL JOURNAL PLUShttps://doi.org/10.1140/epjp/i2019-12681-3. Hejazian, 2014, Comparative study of Euler and mixture models for turbulent flow of Al2O3 nanofluid inside a horizontal tube, Int Commun Heat Mass Transfer, 52, 152, 10.1016/j.icheatmasstransfer.2014.01.022 Goktepe, 2014, Comparison of single and two-phase models for nanofluid convection at the entrance of a uniformly heated tube, Int J Therm Sci, 80, 83, 10.1016/j.ijthermalsci.2014.01.014 ANSYS Inc, Ansys CFX-solver Theory Guide, 2009. Sadripour, 2019, The effect of nanoparticle morphology on heat transfer and entropy generation of supported nanofluids in a heat sink solar collector, Therm Sci Eng Prog, 9, 266, 10.1016/j.tsep.2018.12.002 Behzadmehr, 2007, Prediction of turbulent forced convection of a nanofluid in a tube with uniform heat flux using a two phase approach, Int J Heat Fluid Flow, 28, 211, 10.1016/j.ijheatfluidflow.2006.04.006 Zhe Tian, Sara Rostami, Roozbeh Taherialekouhi, Arash Karimipour, Alireza Moradikazerouni, Hooman Yarmand, Nurin Wahidah Binti Mohd Zulkifli, Prediction of rheological behavior of a new hybrid nanofluid consists of copper oxide and multi wall carbon nanotubes suspended in a mixture of water and ethylene glycol using curve-fitting on experimental data, Physica A: Statistical Mechanics and its Applications,Vol. 549, 2020,124101,https://doi.org/10.1016/j.physa.2019.124101. Asadi, 2019, Recent advances in preparation methods and thermophysical properties of oil-based nanofluids: a state-of-the-art review, Powder Technol, 352, 209, 10.1016/j.powtec.2019.04.054 Dat D. Vo, Jalal Alsarraf, Alireza Moradikazerouni, Masoud Afrand, Hamze Salehipour, Cong Qi, Numerical investigation of γ-AlOOH nano-fluid convection performance in a wavy channel considering various shapes of nanoadditives, Powder Technology, Vol. 345, 2019, https://doi.org/10.1016/j.powtec.2019.01.057. Moradikazerouni, 2019, Comparison of the effect of five different entrance channel shapes of a micro-channel heat sink in forced convection with application to cooling a supercomputer circuit board, Appl Therm Eng, 150, 1078, 10.1016/j.applthermaleng.2019.01.051 Moradikazerouni, 2019, Truong Khang Nguyen, Investigation of a computer CPU heat sink under laminar forced convection using a structural stability method, Int J Heat Mass Transf, 134, 1218, 10.1016/j.ijheatmasstransfer.2019.02.029 Milad Sadeghzadeh,Mohammad Hossein Ahmadi,Mostafa Kahani,Hossein Sakhaeinia,Hossein Chaji,Lingen Chen,Smart modeling by using artificial intelligent techniques on thermal performance of flat-plate solar collector using nanofluid, Energy Science & Engineering, Vol. 7, 5. pp. 1649-1658. Sadeghzadeh, 2020, Prediction of thermo-physical properties of TiO2-Al2O3/water nanoparticles by using artificial neural network, Nanomaterials, 10, 697, 10.3390/nano10040697 Heydar Maddah, Reza Aghayari, Mojtaba Mirzaee, Mohammad Hossein Ahmadi, Milad Sadeghzadeh, Ali J. Chamkha, Factorial experimental design for the thermal performance of a double pipe heat exchanger using Al2O3-TiO2 hybrid nanofluid, International Communications in Heat and Mass Transfer, Vol. 97, 2018, pp. 92-102, https://doi.org/10.1016/j.icheatmasstransfer.2018.07.002. Nasirzadehroshenin, 2020, Modeling of heat transfer performance of carbon nanotube nanofluid in a tube with fixed wall temperature by using ANN–GA, Eur Phys J Plus, 135, 217, 10.1140/epjp/s13360-020-00208-y Mohammad Hossein Ahmadi,Mahyar Ghazvini,Milad Sadeghzadeh,Mohammad Alhuyi Nazari,Ravinder Kumar,Abbas Naeimi,Tingzhen Ming, Solar power technology for electricity generation: A critical review, Energy Science & Engineering, Vol. 6, 5, pp. 340-361, 2018. https://doi.org/10.1002/ese3.239.