Numerical simulation of impact tests on GFRP composite laminates

Abrate, 1998

Sjoblom, 1988, On low-velocity impact testing of composite materials, J Compos Mater, 22, 30, 10.1177/002199838802200103

Richardson, 1996, Review of low-velocity impact properties of composite materials, Compos Part A Appl Sci Manuf, 27A, 1123, 10.1016/1359-835X(96)00074-7

Shim, 2005, Characterization of the residual mechanical properties of woven fabric reinforced composites after low-velocity impact, Int J Mech Sci, 47, 647, 10.1016/j.ijmecsci.2005.01.014

Chen, 1985, Dynamic large deflection response of composite laminates subjected to impact, Compos Struct, 4, 59, 10.1016/0263-8223(85)90020-0

Caprino, 2002, Elastic behaviour of circular composite plates transversely loaded at the centre, Compos Part A Appl Sci Manuf, 33, 1191, 10.1016/S1359-835X(02)00087-8

Olsson, 2001, Analytical prediction of large mass impact damage in composite laminates, Compos Part A Appl Sci Manuf, 32, 1207, 10.1016/S1359-835X(01)00073-2

Naik, 2000, Damage in woven-fabric composites subjected to low-velocity impact, Compos Sci Technol, 60, 731, 10.1016/S0266-3538(99)00183-9

Sutherland, 2004, Effect of laminate thickness and of matrix resin on the impact of low fibre-volume, woven roving E-glass composites, Compos Sci Technol, 64, 1691, 10.1016/j.compscitech.2004.01.001

Zhou, 1998, The use of experimentally-determined impact force as a damage measure in impact damage resistance and tolerance of composite structures, Compos Struct, 42, 375, 10.1016/S0263-8223(98)00089-0

Abrate, 2001, Modeling of impacts on composite structures, Compos Struct, 51, 129, 10.1016/S0263-8223(00)00138-0

Olsson, 2006, Delamination threshold load for dynamic impact on plates, Int J Solids Struct, 43, 3124, 10.1016/j.ijsolstr.2005.05.005

Jones, 1999

Olsson, 1992, Damage in composites: a plasticity approach, J Compos Mater, 44, 103

Car, 2001, A large strain plasticity model for anisotropic materials – composite material application, Int J Plast, 17, 1437, 10.1016/S0749-6419(00)00098-X

Garg, 1988, Delamination - a damage mode in composite structures, Eng Fract Mech, 29, 557, 10.1016/0013-7944(88)90181-6

Zerbst, 2009, Fracture and damage mechanics modeling of thin-walled structures – An overview, Eng Fract Mech, 76, 5, 10.1016/j.engfracmech.2007.10.005

Kachanov, 1958, Rupture time under creep conditions, Izv Akad Nauk SSSR Otd Tekhn Nauk, 8, 26

Rabotnov, 1969

Matzenmiller, 1995, A constitutive model for anisotropic damage in fibre-composites, Mech Mater, 20, 125, 10.1016/0167-6636(94)00053-0

Williams, 2003, A physically based continuum damage mechanics model for thin laminated composite structures, Int J Solids Struct, 40, 2267, 10.1016/S0020-7683(03)00016-7

Iannucci, 2006, Progressive failure modeling of woven carbon composite under impact, Int J Impact Eng, 32, 1013, 10.1016/j.ijimpeng.2004.08.006

Donadon, 2008, A progressive failure model for composite laminates subjected to low velocity impact damage, Comput Struct, 86, 1232, 10.1016/j.compstruc.2007.11.004

Lopes, 2009, Low-velocity impact damage on dispersed stacking sequence laminates. Part II: numerical simulations, Compos Sci Technol, 69, 937, 10.1016/j.compscitech.2009.02.015

Shivakumar, 1985, Prediction of impact force and duration due to low-velocity impact on circular composite laminates, J Appl Mech, 52, 674, 10.1115/1.3169120

Sutherland, 2005, Impact of low fibre-volume, glass/polyester rectangular plates, Compos Struct, 68, 13, 10.1016/j.compstruct.2004.02.010

2007

Schweizerhof, 1998

Tsai, 1971, A general theory of strength for anisotropic materials, J Compos Mater, 5, 58, 10.1177/002199837100500106

Gama BA, Bogetti TA, Gillespie Jr JW. “Progressive Damage Modeling of Plain-Weave Composites using LS-Dyna Composite Damage Model MAT162”, 7th Europ. LS-DYNA Conf., D-III-04, 2009.

Sevkat, 2009, Drop-weight impact of plain-woven hybrid glass–graphite/toughened epoxy composites, Compos Part A Appl Sci Manuf, 40, 1090, 10.1016/j.compositesa.2009.04.028

Caprino, 1984, Composite materialresponse under low-velocity impact, Compos Struct, 2, 261, 10.1016/0263-8223(84)90018-7

Sims GD. “Understanding Charpy impact testing of composite laminates”, Proc. 6th Int. Conf. on Composite Materials and 2nd European Conf. on Composite Materials, Imperial College, London; 1988, p. 3494–3507.

Asprone, 2009, Strain-rate sensitiveness of a pultruded e-glass/polyester composite, J Compos Constr, 13, 558, 10.1061/(ASCE)CC.1943-5614.0000036

Wu, 1988, Measurements of matrix crackingand delamination caused by impact on composite plates, J Compos Mater, 22, 518, 10.1177/002199838802200602