Numerical simulation of cold working of rivet holes

Moreira, 2004, The residual stress intensity factors for cold worked cracked holes, Fatigue Fract. Eng. Mater. Struct., 27, 879, 10.1111/j.1460-2695.2004.00768.x Kang, 2002, Three-dimensional finite element analysis of the cold expansion of fastner holes in two aluminium alloys, J. Eng. Mater. Technol., 124, 140, 10.1115/1.1448922 Ball, 1995, Elastic–plastic stress-analysis of cold expanded fastener holes, Fatigue Fract. Eng. Mater. Struct., 18, 47, 10.1111/j.1460-2695.1995.tb00141.x Poussard, 1995, Analytical and finite element predictions of residual stress in coldworked fastner holes, J. Strain Anal., 30, 291, 10.1243/03093247V304291 Wanlin, 1993, Elastic–plastic analysis of finite sheet with a cold worked hole, Eng. Fract. Mech., 45, 857, 10.1016/0013-7944(93)90070-9 Clark, 1991, Modelling residual-stresses and fatigue crack-growth at cold-expanded fastener holes, Fatigue Fract. Eng. Mater. Struct., 14, 579, 10.1111/j.1460-2695.1991.tb00684.x Webster, 2001, Residual stress and their influence on fatigue lifetimes, Int. J. Fatigue, 23, S375, 10.1016/S0142-1123(01)00133-5 M. Priest, C.G.C. Poussard, M.J. Pavier, D.J. Smith, An assessment of residual stress measurements around cold-worked holes, Exp. Mech. (1995) 361–366. Ball, 1998, Experimental investigation on the effects of cold expansion of fastener holes, Fatigue Fract. Eng. Mater. Struct., 21, 17, 10.1046/j.1460-2695.1998.00430.x Schwarmann, 1983, On improving the fatigue performance of a double-shear lap joint, Int. J. Fatigue, 5, 105, 10.1016/0142-1123(83)90062-2 Grandt, 1975, Stress intensity factors for some throught-cracked fastner holes, Int. J. Fract., 5, 283, 10.1007/BF00038895 A.F. Grandt Jr., J.P. Gallagher, Proposed fracture mechanics criteria to select mechanical fasteners for long service lives, Fracture Toughness and Slow-stable Cracking, vol. 559, ASTM STP, Philadelphia, 1974, pp. 283–297. Pell, 1989, Fatigue of thick-section cold-expanded holes with and without cracks, Fatigue Fract. Eng. Mater. Struct., 12, 553, 10.1111/j.1460-2695.1989.tb00563.x Bernard, 1995, Effect of re-cold-working on fatigue life enhancement of a fastner hole, Fatigue Fract. Eng. Mater. Struct., 18, 765 P. Papanikos, Mechanics of mixed mode fatigue behaviour of cold worked adjacent holes, Ph.D. Thesis, University of Toronto, 1997. Leon, 1998, Benefits of split mandrel cold working, Int. J. Fatigue, 20, 1, 10.1016/S0142-1123(97)00059-5 Schijve, 2001 Pavier, 1998, Finite element modelling of the interaction of residual stress with mechanical load for a crack emanating from a cold worked fastener hole, J. Strain Anal. Eng. Design, 33, 275, 10.1243/0309324981512995 Chakherlou, 2004, A novel method of cold expansion which crates near-uniform compressive tangential residual stress around a fastner hole, Fatigue Fract. Eng. Mater. Struct., 27, 343, 10.1111/j.1460-2695.2004.00727.x ABAQUS User's Manual, Hibbitt, Karlsson and Sorenson, 2001. FTI, Cold Expansion Holes Using the Standard Split Sleeve System and Countersink Cold Expansion, Fatigue Technology Inc., 2002. Pavier, 1999, Effect of residual stress around cold worked holes on fracture under superimposed mechanical load, Eng. Fract. Mech., 63, 751, 10.1016/S0013-7944(99)00050-8 Pavier, 1997, A finite element simulation of the cold working process for fastener holes, J. Strain Anal. Eng. Design, 32, 287, 10.1243/0309324971513418 O’Brien, 2000, Beneficial residual stress from the cold expansion of large holes in thick light alloy plate, J. Strain Anal. Eng. Design, 35, 261, 10.1243/0309324001514404