Numerical modelling of DMLS Ti6Al4V(ELI) polygon structures

Noronha, 2023, Ti-6Al-4V hollow-strut lattice materials by laser powder bed fusion, Addit. Manuf., 72 Soni, 2023, A critical review of recent advances in the aerospace materials, Mater. Today: Proc. Abdel-Mottaleb, 2023, Mechanical properties of titanium alloys additive manufacturing for biomedical applications, Advances in Metal Additive Manufacturing, 219 Du Plessis, 2019, Beautiful and functional: a review of biomimetic design in additive manufacturing, Addit. Manuf., 27, 408 Zhang, 2022, Enhanced strength and high-temperature wear resistance of Ti6Al4V alloy fabricated by laser solid forming, J. Manuf. Sci. Eng., 144, 10.1115/1.4054901 Jin, 2023, A review of additive manufacturing techniques and post-processing for high-temperature titanium alloys, Metals, 13, 1327, 10.3390/met13081327 Benedetti, 2021, Architected cellular materials: a review on their mechanical properties towards fatigue-tolerant design and fabrication, Mater. Sci. Eng. R Rep., 144, 10.1016/j.mser.2021.100606 Sarraf, 2021, A state-of-the-art review of the fabrication and characteristics of titanium and its alloys for biomedical applications, Bio-design and Manufacturing, 1 Zhang, 2020, Design, fabrication, and mechanics of 3D micro‐/nanolattices, Small, 16 Da, 2018, Topology optimization of periodic lattice structures taking into account strain gradient, Comput. Struct., 210, 28, 10.1016/j.compstruc.2018.09.003 Pan, 2020, Design and optimization of lattice structures: a review, Appl. Sci., 10, 6374, 10.3390/app10186374 Yu, 2018, Mechanical metamaterials associated with stiffness, rigidity, and compressibility: a brief review, Prog. Mater. Sci., 94, 114, 10.1016/j.pmatsci.2017.12.003 Yang, 2015, Mechanical properties of 3D re-entrant honeycomb auxetic structures realized via additive manufacturing, Int. J. Solid Struct., 69, 475, 10.1016/j.ijsolstr.2015.05.005 Zok, 2016, Periodic truss structures, J. Mech. Phys. Solid., 96, 184, 10.1016/j.jmps.2016.07.007 Bührig-Polaczek, 2016, Biomimetic cellular metals—using hierarchical structuring for energy absorption, Bioinspiration Biomimetics, 11, 10.1088/1748-3190/11/4/045002 Helou, 2018, Design, analysis, and manufacturing of lattice structures: an overview, Int. J. Comput. Integrated Manuf., 31, 243, 10.1080/0951192X.2017.1407456 Gibson, 1997 Wadley, 2003, Fabrication and structural performance of periodic cellular metal sandwich structures, Compos. Sci. Technol., 63, 2331, 10.1016/S0266-3538(03)00266-5 Banhart, 2001, Manufacture, characterisation and application of cellular metals and metal foams, Prog. Mater. Sci., 46, 559, 10.1016/S0079-6425(00)00002-5 Kędzierski, 2016, Experimental study of hybrid soft ballistic structures, Compos. Struct., 153, 204, 10.1016/j.compstruct.2016.06.006 Zhang, 2014, Experimental and numerical studies on the crush resistance of aluminum honeycombs with various cell configurations, Int. J. Impact Eng., 66, 48, 10.1016/j.ijimpeng.2013.12.009 Goldmann, 2022, Additive manufacturing of honeycomb lattice structure—from theoretical models to polymer and metal products, Materials, 15, 1838, 10.3390/ma15051838 Malek, 2015, Effective elastic properties of periodic hexagonal honeycombs, Mech. Mater., 91, 226, 10.1016/j.mechmat.2015.07.008 Gibson, 1981 Gibson, 1982, The mechanics of two-dimensional cellular materials, Proc. Roy. Soc. Lond., 382, 25 Warren, 1987, Foam mechanics: the linear elastic response of two-dimensional spatially periodic cellular materials, Mech. Mater., 6, 27, 10.1016/0167-6636(87)90020-2 Yan, 2020, Additive manufacturing of functionally graded metallic materials using laser metal deposition, Addit. Manuf., 31 He, 2019, Effect of structural parameters on low-velocity impact behavior of aluminum honeycomb sandwich structures with CFRP face sheets, Thin-Walled Struct., 137, 411, 10.1016/j.tws.2019.01.022 Ghatage, 2020, On the numerical modelling and analysis of multi-directional functionally graded composite structures: a review, Compos. Struct., 236, 10.1016/j.compstruct.2019.111837 Gonella, 2008, Homogenization and equivalent in-plane properties of two-dimensional periodic lattices, Int. J. Solid Struct., 45, 2897, 10.1016/j.ijsolstr.2008.01.002 Szymczyk, 2020, The effect of geometry on mechanical properties of Ti6Al4V ELI scaffolds manufactured using additive manufacturing technology, Arch. Civ. Mech. Eng., 20, 1, 10.1007/s43452-020-0011-y Vrancken, 2012, Heat treatment of Ti6Al4V produced by selective laser melting: microstructure and mechanical properties, J. Alloys Compd., 541, 177, 10.1016/j.jallcom.2012.07.022 Case, 2013 Chibinyani, 2022, Reduced order topology optimisation of a planar honeycomb defined by a linear elastic Ti6al4V (ELI) material model, S. Afr. J. Ind. Eng., 33, 299 Chen, 2020, In-plane elasticity of regular hexagonal honeycombs with three different joints: a comparative study, Mech. Mater., 148, 10.1016/j.mechmat.2020.103496 García, 2017, Deflections in sawn timber beams with stochastic properties, European Journal of Wood and Wood Products, 75, 683, 10.1007/s00107-016-1124-0 Berger, 2017, Mechanical metamaterials at the theoretical limit of isotropic elastic stiffness, Nature, 543, 533, 10.1038/nature21075 Vrolijk, 2016, Clay smear: review of mechanisms and applications, J. Struct. Geol., 86, 95, 10.1016/j.jsg.2015.09.006 Catapano, 2014, A multi-scale approach for the optimum design of sandwich plates with honeycomb core. Part I: homogenisation of core properties, Compos. Struct., 118, 664, 10.1016/j.compstruct.2014.07.057 Akoglu, 2018, User's guide to correlation coefficients, Turkish journal of emergency medicine, 18, 91, 10.1016/j.tjem.2018.08.001 Asuero, 2006, The correlation coefficient: an overview, Crit. Rev. Anal. Chem., 36, 41, 10.1080/10408340500526766 Jiménez, 2013, Buckling of rectangular and hexagonal honeycomb under combined axial compression and transverse shear, Int. J. Solid Struct., 50, 3934, 10.1016/j.ijsolstr.2013.08.001 Novoselac, 2012, Linear and nonlinear buckling and post buckling analysis of a bar with the influence of imperfections, Teh. Vjesn., 19, 695 Lee, 1997, The effects of strain rate and temperature on the compressive deformation behaviour of Ti-6Al-4V alloy, J. Mater. Process. Technol., 71, 235, 10.1016/S0924-0136(97)00080-0 Dos Reis, 2012, Equivalent mechanical properties of auxetic lattices from discrete homogenization, Comput. Mater. Sci., 51, 314, 10.1016/j.commatsci.2011.07.014 Djavanroodi, 2010, Experimental and numerical evaluation of forming limit diagram for Ti6Al4V titanium and Al6061-T6 aluminum alloys sheets, Mater. Des., 31, 4866, 10.1016/j.matdes.2010.05.030 Riva, 2021, Mechanical characterization and properties of laser-based powder bed–fused lattice structures: a review, Int. J. Adv. Des. Manuf. Technol., 113, 649, 10.1007/s00170-021-06631-4 Xiao, 2022, Mechanical characterization of additively manufactured metallic lattice structures with hollow struts under static and dynamic loadings, Int. J. Impact Eng., 169, 10.1016/j.ijimpeng.2022.104333 Antolak-Dudka, 2019, Static and dynamic loading behavior of Ti6Al4V honeycomb structures manufactured by Laser Engineered Net Shaping (LENSTM) technology, Materials, 12, 1225, 10.3390/ma12081225 Choy, 2017, Compressive properties of Ti-6Al-4V lattice structures fabricated by selective laser melting: design, orientation, and density, Addit. Manuf., 16, 213 Hussein, 2020, Effective elastic moduli of metal honeycombs manufactured using selective laser melting, Rapid Prototyp. J., 26, 971, 10.1108/RPJ-12-2018-0311 Obadimu, 2022, Load-rate effects on the in-plane compressive behaviour of additively manufactured steel 316L honeycomb structures, Eng. Struct., 273, 10.1016/j.engstruct.2022.115063 Aktay, 2008, Numerical modelling of honeycomb core crush behaviour, Eng. Fract. Mech., 75, 2616, 10.1016/j.engfracmech.2007.03.008 Chawla, 2003, Prediction of crushing behaviour of honeycomb structures, Int. J. Crashworthiness, 8, 229, 10.1533/ijcr.2003.0227 Stanczak, 2019, Numerical modelling of honeycomb structure subjected to blast loading, 14 Wang, 2019, Numerical and theoretical analysis of honeycomb structure filled with circular aluminum tubes subjected to axial compression, Compos. B Eng., 165, 626, 10.1016/j.compositesb.2019.01.070 Jiménez, 2013, Buckling of rectangular and hexagonal honeycomb under combined axial compression and transverse shear, Int. J. Solid Struct., 50, 3934, 10.1016/j.ijsolstr.2013.08.001 Qiu, 2020, Buckling of honeycomb structures under out-of-plane loads, J. Sandw. Struct. Mater., 22, 797, 10.1177/1099636218774383 Guerra Silva, 2021, Influence of geometric and manufacturing parameters on the compressive behavior of 3D printed polymer lattice structures, Materials, 14, 1462, 10.3390/ma14061462 Liu, 2023, Boriding of tungsten by the powder-pack process: phase formation, growth kinetics and enhanced neutron shielding, Int. J. Refract. Metals Hard Mater., 110, 10.1016/j.ijrmhm.2022.106049 Pan, 2023, Additive manufacturing of tungsten, tungsten-based alloys, and tungsten matrix composites, Tungsten, 5, 1, 10.1007/s42864-022-00153-6 Mostafaei, 2023, Additive Manufacturing of Nickel-based superalloys: a state-of-the-art review on process-structure-defect-property relationship, Prog. Mater. Sci., 10.1016/j.pmatsci.2023.101108 Yap, 2015, Review of selective laser melting: materials and applications, Appl. Phys. Rev., 2, 10.1063/1.4935926 Careri, 2023 Singer, 2017, Additively manufactured copper components and composite structures for thermal management applications, 174 Banhart, 2001, Manufacture, characterisation and application of cellular metals and metal foams, Prog. Mater. Sci., 46, 559, 10.1016/S0079-6425(00)00002-5 Asadabadi, 2022, Impact of utilizing hollow copper circular fins and glass wool insulation on the performance enhancement of pyramid solar still unit: an experimental approach, Sol. Energy, 241, 564, 10.1016/j.solener.2022.06.029