Numerical investigation of the effect of joint geometrical parameters on the mechanical properties of a non-persistent jointed rock mass under uniaxial compression

Jennings JE. A mathematical theory for the calculation of the stability of open cast mines. In: Proceedings of the symposium on theoretical background to the planning of open pit mines, Johannesburg; 1970. p. 87–102.

Nemat-Nasser, 1982, Compression-induced nonplanar crack extension with application to splitting, exfoliation, and rockburst, J Geophys Res, 87, 6805, 10.1029/JB087iB08p06805

Reyes O, Einstein HH. Failure mechanisms of fractured rock – a fracture coalescence model. In: Proceedings of the 7th international congress of rock mechanics, Aachen, Germany; 1991. p. 333–40.

Shen, 1995, Coalescence of fractures under shear stresses in experiments, J Geophys Res, 100, 5975, 10.1029/95JB00040

Mughieda, 2004, Fracture mechanisms of offset rock joints-a laboratory investigation, Geotech Geol Eng, 22, 545, 10.1023/B:GEGE.0000047045.89857.06

Wong, 2001, Analysis of crack coalescence in rock-like materials containing three flaws-Part I: experimental approach, Int J Rock Mech Min Sci, 38, 909, 10.1016/S1365-1609(01)00064-8

Tang, 2001, Analysis of crack coalescence in rock-like materials containing three flaws – Part II: numerical approach, Int J Rock Mech Min Sci, 38, 925, 10.1016/S1365-1609(01)00065-X

Lee, 2011, An experimental and numerical study of fracture coalescence in pre-cracked specimens under uniaxial compression, Int J Solids Struct, 48, 979, 10.1016/j.ijsolstr.2010.12.001

Jamil SM. Strength of non-persistent rock joints. Ph.D. thesis. Urbana, Illinois: University of Ullinois; 1992.

Cording EJ, Jamil SM. Slide geometrieson rock slopes and walls. In: 4th South American congress on rock mechanics, Santiago, Chile; 1997. p. 199–221.

Mughieda O. Failure mechanisms and strength of non-persistent rock joints. Ph.D. thesis. Urbana, Illinois: University of Ullinois; 1997.

Prudencio, 2007, Strength and failure modes of rock mass models with non-persistent joints, Int J Rock Mech Min Sci, 44, 890, 10.1016/j.ijrmms.2007.01.005

Van Sint Jan M, Prudencio M. Strength of model rock masses with discontinuous joints. In: Proceedings of the 11th congress of international society of rock mechanics, South Africa; 2003. p. 1275–9.

Prudencio M. Study of the strength and failure mode of rock mass with non-persistent joints. Ph.D. thesis. Santiago, Chile: Catholic University of Chile; 2009 [Spanish].

Potyondy, 2004, A bonded-particle model for rock, Int J Rock Mech Min Sci, 41, 1329, 10.1016/j.ijrmms.2004.09.011

Cho, 2007, A clumped particle model for rock, Int J Rock Mech Min Sci, 44, 997, 10.1016/j.ijrmms.2007.02.002

Hunt, 2003, Modelling the Kaiser effect and deformation rate analysis in sandstone using the discrete element method, Comput Geotech, 30, 611, 10.1016/S0266-352X(03)00061-2

Hazzard, 2000, Simulating acoustic emissions in bonded-particle models of rock, Int J Rock Mech Min Sci, 37, 867, 10.1016/S1365-1609(00)00017-4

Hazzard JF, Young RP. 3D numerical modelling of acoustic emissions. In: ISRM workshop on geophysics in rock mechanics at the 5th North American rock mechanics symposium, Toronto, Canada; 2002.

Wanne T. PFC3D simulation procedure for compressive strength testing of anisotropic hard rock. In: Proceedings of the 1st international PFC symposium, numerical modeling in mocromechanics via particle methods, Gelsenkirchen, Germany; 2002. p. 241–9.

Fakhimi, 2006, Shear banding in sandstone: physical and numerical studies, Int J Geomech, 6, 185, 10.1061/(ASCE)1532-3641(2006)6:3(185)

Jiang, 2011, Modeling shear behavior and strain localization in cemented sands by two-dimensional distinct element method analyses, Comput Geotech, 38, 14, 10.1016/j.compgeo.2010.09.001

Fakhimi, 2007, Application of dimensional analysis in calibration of a discrete element model for rock deformation and fracture, Rock Mech Rock Eng, 40, 193, 10.1007/s00603-006-0095-6

Tran, 2009, Discrete modelling of rock-ageing in rockfill dams, Comput Geotech, 36, 264, 10.1016/j.compgeo.2008.01.005

Potyondy, 2007, Simulating stress corrosion with a bonded-particle model for rock, Int J Rock Mech Min Sci, 44, 677, 10.1016/j.ijrmms.2006.10.002

Zhang, 2011, A discrete numerical approach for modeling face stability in slurry shield tunnelling in soft soils, Comput Geotech, 38, 94, 10.1016/j.compgeo.2010.10.011

Akram, 2010, Physical and numerical investigation of a cemented granular assembly of steel spheres, Int J Numer Anal Methods Geomech, 34, 1896, 10.1002/nag.885

Holt, 2005, Comparison between controlled laboratory experiments and discrete particle simulations of the mechanical behaviour of rock, Int J Rock Mech Min Sci, 42, 985, 10.1016/j.ijrmms.2005.05.006

Kulatilake, 2001, Physical and particle flow modeling of jointed rock block behavior under uniaxial loading, Int J Rock Mech Min Sci, 38, 641, 10.1016/S1365-1609(01)00025-9

Wang, 2003, Numerical analysis of the stability of heavily jointed rock slopes using PFC2D, Int J Rock Mech Min Sci, 40, 415, 10.1016/S1365-1609(03)00004-2

Park ES, Martin CD, Christiansson R. Simulation of the mechanical behaviour of discontinuous rock masses using a bonded-particle model. In: Gulf rocks 2004, the 6th North America rock mechanics symposium (NARMS), Houston, Texas; 2004.

Bahaaddini M, Sharrock G, Hebbelwhite B, Mitra R. Direct shear tests to model the shear behaviour of rock joints by PFC2D. In: 46th US rock mechanics/geomechanics symposium, Chicago, USA; 2012.

Pierce M, Cundall P, Potyondy D, Mas Ivars D. A synthetic rock mass model for jointed rock. In: Rock mechanics: meeting society’s challenges and demands, 1st Canada–US rock mechanics symposium. London: Vancouver; 2007.

Itasca Consulting Group Inc. PFC3D manual, version 4.0. Minneapolis, Minnesota; 2008.

Mas Ivars D. Bonded particle model for jointed rock mass. Ph.D. thesis. Sweden: University of KTH; 2010.

Mas Ivars, 2011, The synthetic rock mass approach for jointed rock mass modelling, Int J Rock Mech Min Sci, 48, 219, 10.1016/j.ijrmms.2010.11.014

Esmaieli, 2010, Estimating geometrical and mechanical REV based on synthetic rock mass models at Brunswick Mine, Int J Rock Mech Min Sci, 47, 915, 10.1016/j.ijrmms.2010.05.010

Esmaieli K, Hadjigeorgiou J, Grenon M. Estimating of synthetic rock mass strength accounting for sample size. In: International conference on rock joints and jointed rock masses, Arizona, USA; 2009.

Hadjigeorgiou, 2009, Stability analysis of vertical excavations in hard rock by integrating a fracture system into a PFC model, Tunn Undergr Sp Tech, 24, 296, 10.1016/j.tust.2008.10.002

Lambert, 2010, Influence of calcium leaching on the mechanical behavior of a rock-mortar interface: a DEM analysis, Comput Geotech, 37, 258, 10.1016/j.compgeo.2009.09.006

Bahaaddini M, Sharrock G, Hebblewhite BK. A comparison of physical and numerical experiments on artificial jointed rock masses using PFC3D. In: Proceedings of the 2nd international FLAC/DEM symposium, Melbourne, Australia; 2011. p. 321–30.

Bahaaddini M, Sharrock G, Hebblewhite BK. Synthetic rock mass modelling of a rock mass with non-persistent joints. In: 35th APCOM symposium, Wollongong, Australia; 2011. p. 615–24.

Cho N. Discrete element modeling of rock pre-peak fracturing and dilation. Ph.D. thesis. Edmonton, Alberta: University of Alberta; 2008.

Schöpfer, 2009, The impact of porosity and crack density on the elasticity, strength and friction of cohesive granular materials: insights from DEM modelling, Int J Rock Mech Min Sci, 46, 250, 10.1016/j.ijrmms.2008.03.009

Potyondy DO. Parallel-bond refinements to match macroproperties of hard rock. In: 2nd International FLAC/DEM symposium, Melbourne; 2011.

Hazzard, 2000, Micromechanical modeling of cracking and failure in brittle rocks, J Geophys Res, 105, 16683, 10.1029/2000JB900085