Numerical, experimental, nondestructive, and image analyses of damage progression in cast A356 aluminum notch tensile bars

Garrison, 1987, Ductile fracture, J. Phys. Chem. Solids, 48, 1035, 10.1016/0022-3697(87)90118-1

I.G. Palmer, G.C. Smith, Fracture of internally oxidized copper alloys, in: Proc. AIME Conf. Oxide Dispersion Strengthening, Bolton Landing, NY, Gordon and Breach, NY, 1967

Gurland, 1972, Observations on the fracture of cementite particles in a spheodized 1.05% C steel deformed at room temperature, Acta Metall., 20, 735, 10.1016/0001-6160(72)90102-2

Cox, 1974, An investigation of the plastic fracture of AISI 4340 and 18 Nickel-200 grade maraging steels, Metall. Trans., 5A, 1457, 10.1007/BF02646633

Hahn, 1975, Metallurgical factors affecting fracture toughness of aluminum alloys, Metall. Trans., 6A, 653, 10.1007/BF02672285

Pan, 1990, Effects of solidification parameters on the feeding efficiency of A356 aluminum alloy, AFS Trans., 98, 735

Pan, 1991, Effects of modification and solidification conditions on the feeding behavior of A356 Al alloy, AFS Trans., 99, 605

Samuel, 1995, A metallographic study of porosity and fracture behavior in relation to the tensile properties in 319.2 end chill castings, Metall. Trans., 26A, 2359, 10.1007/BF02671250

Horstemeyer, 2000, On factors affecting localization and void growth in ductile metals: A parametric study, Int. J. Damage Mech., 9, 5, 10.1177/105678950000900102

Harris, 1956, Tensile properties of aluminum–silicon magnesium alloys and the effect of sodium modification, AFS Trans., 64, 470

Frederick, 1968, The relation of ductility to dendrite cell size in a cast Al–Si–Mg alloy, Trans. Metall. Soc. AIME, 242, 2063

Vorren, 1984, Microstructure and mechanical properties of AlSi(Mg) casting alloys, AFS Trans., 92, 459

Yeh, 1996, The cracking mechanism of silicon particles in an A357 aluminum alloy, Metall. Mater. Trans., 27A, 3558, 10.1007/BF02595447

Caceres, 1995, The deformation and fracture behavior of an Al–Si–Mg casting alloy, Mat. Sci. Eng. A, 197, 171, 10.1016/0921-5093(94)09775-5

Closset, 1982, Mechanical properties of A356.0 alloys modified with pure strontium, AFS Trans., 90, 453

Gurland, 1963, The mechanism of ductile rupture of metals containing inclusions, Trans. ASM, 56, 442

Ashby, 1966, Work hardening of dispersion-hardened crystals, Phil. Mag., 14, 1157, 10.1080/14786436608224282

Rosenfield, 1969, Criteria for ductile fracture of two-phase alloys, Metall. Rev., 13, 29, 10.1179/095066068790421700

McClintock, 1968, A criterion for ductile fracture by the growth of holes, J. Appl. Mech., 35, 363, 10.1115/1.3601204

Rice, 1969, On the ductile enlargement of voids in triaxial stress fields, J. Mech. Phys. Solids, 17, 201, 10.1016/0022-5096(69)90033-7

Barbee, 1972, Dynamic fracture criteria for ductile and brittle metals, J. Mater. JMLSA, 7, 393

Argon, 1975, Cavity formation from inclusions in ductile fracture, Metall. Trans., 6A, 825, 10.1007/BF02672306

Raj, 1975, Intergranular fracture at elevated temperature, Acta Metall. Mater., 23, 653, 10.1016/0001-6160(75)90047-4

Gurson, 1977, Continuum theory of ductile rupture by void nucleation and growth. 1. Yield criteria a and flow rules for porous ductile media, J. Engng. Mater. Tech., 99, 2, 10.1115/1.3443401

Needleman, 1978, Limits to ductility set by plastic flow localization, 237

Goods, 1979, The nucleation of cavities by plastic deformation, Acta Metall., 27, 1, 10.1016/0001-6160(79)90051-8

Saje, 1982, Void nucleation effects on shear localization in porous plastic solids, Int. J. Fract., 19, 163, 10.1007/BF00017128

Hirth, 1985, Analysis of cavity nucleation in solids subjected to external and internal stresses, Acta Metall. Mater., 33, 359, 10.1016/0001-6160(85)90078-1

Tvergaard, 1982, Ductile fracture by cavity nucleation between larger voids, J. Mech. Phys. Solids, 30, 265, 10.1016/0022-5096(82)90033-3

Tvergaard, 1982, On localization in ductile materials containing spherical voids, Int. J. Fract., 18, 237, 10.1007/BF00015686

Tvergaard, 1990, Material failure by void coalescence, Adv. Appl. Mech., 27, 83, 10.1016/S0065-2156(08)70195-9

Needleman, 1987, A continuum model for void nucleation by inclusion debonding, J. Appl. Mech., 54, 525, 10.1115/1.3173064

Hom, 1989, Void growth in elastic–plastic materials, J. Appl. Mech., 56, 309, 10.1115/1.3176085

Bammann, 1989, A damage model for ductile metals, Nucl. Eng. Des., 116, 355, 10.1016/0029-5493(89)90095-2

Cocks, 1989, Inelastic deformation of porous materials, J. Mech. Phys. Solids, 37, 693, 10.1016/0022-5096(89)90014-8

Castaneda, 1994, Constitutive models for porous materials with evolving microstructure, J. Mech. Phys. Solids, 42, 1459, 10.1016/0022-5096(94)90005-1

Horstemeyer, 1999, A void-crack nucleation model for ductile metals, Int. J. Solids Struct., 36, 5029, 10.1016/S0020-7683(98)00239-X

Horstemeyer, 2000, Micromechanical finite element calculations of temperature and void configuration effects on void growth and coalescence, Int. J. Plast., 16

Seweryn, 1998, On the criterion of damage evolution for variable multiaxial stress states, Int. J. Solids Struct., 35, 1589, 10.1016/S0020-7683(97)00121-2

Tewari, 1998, Quantitative characterization of spatial arrangement of micropores in cast microstructures, Mat. Char., 40, 119, 10.1016/S1044-5803(98)00003-5

Bammann, 1993, Failure in ductile materials using finite element methods

Bammann, 1996, Modeling large deformation and failure in manufacturing processes, 259

Horstemeyer, 2000, Modeling stress state dependent damage evolution in a cast Al–Si–Mg aluminum alloy, Theor. Appl. Fract. Mech., 33, 31, 10.1016/S0167-8442(99)00049-X

M.F. Horstemeyer, V. Revelli, Stress history dependent localization and failure using continuum damage mechanics concepts, in: Applications of Continuum Damage Mechanics to Fatigue and Fracture, ASTM STP 1315, ASTM, 1997, pp. 216–237

Louis, 1995, Application of image analysis for characterization of spatial arrangement of features in microstructures, Metall. Mater. Trans., 26A, 1449, 10.1007/BF02647595

Louis, 1996, Computer simulation of spatial arrangement and connectivity of particles in three dimensional microstructure: Application to model electrical conductivity of polymer matrix composite, Acta Metall. Mater., 44, 1519, 10.1016/1359-6454(95)00296-0

Yang, 1997, Modelling of non-uniform spatial arrangement of fibers in a ceramic matrix composite, Acta Mater., 45, 3059, 10.1016/S1359-6454(96)00394-1

Rice, 1971, Inelastic constitutive relations for solids: An internal variable theory and its application to metal plasticity, J. Mech. Phys. Solids, 9, 433, 10.1016/0022-5096(71)90010-X

M.P. Miller, D.L. McDowell, Stress state dependence of finite strain inelasticity, in: ASME Summer Mechanics Meeting, Tucson, AZ, ASME-AMD, 32, Microstructural Characterization in Constitutive Modeling of Metals and Granular Media, 1992, pp. 27–44

Miller, 1995, Reflecting microstructrual evolution in hardening models for polycrystalline metals

M.F. Horstemeyer, D.L. McDowell, D.J. Bammann, Torsional softening and the forming limit diagram, in: K. Chen (Ed.), SAE Tech. Ser. 960599, Analysis of Autobody Stamping Technology, 1995

Kachanov, 1958, Time of the fractured process under creep conditions, Izv. Akad. Nauk. SSSR OTN Tekh. Nauk., 8, 26

Rabotnov, 1969

Miller, 1978, Unified approach to predicting interactions among creep, cyclic plasticity, and recovery, Nucl. Eng. Des., 51, 35, 10.1016/0029-5493(78)90195-4

DeBorst, 1987, Smeared cracking, plasticity, creep, and thermal loading: A unified approach, Comput. Meth. Appl. Mech. Eng., 62, 89, 10.1016/0045-7825(87)90091-0

M.F. Horstemeyer, Damage of HY100 steel plates from oblique constrained blast waves, in: J.H. Giovanola, A.J. Rosakis (Eds.), Advances in Local Fracture/Damage Models for the Analysis of Engineering Problems, Book No. H00741, vol. AMD 137, 1992

M.F. Horstemeyer, Structural analysis of a submarine using statistical design of experiments, in: E.P. Chen, V.K. Luk (Eds.), Advances in Numerical Simulation Techniques for Penetration and Perforation of Solids, ASME Winter Meeting, vol. AMD 171, 1993

Cocks, 1982, On creep fracture by void growth, Prog. Mater. Sci., 27, 189, 10.1016/0079-6425(82)90001-9

Horstemeyer, 2000, A numerical parametric investigation of localization and forming limits, Int. J. Damage Mech., 9, 255, 10.1177/105678950000900304

Budiansky, 1982, Void growth and collapse in viscous solids, 13

Underwood, 1970

Lu, 1998, High temperature effects in 304L stainless steel notch tests, Theor. Appl. Fract. Mech., 30, 139, 10.1016/S0167-8442(98)00051-2