Numerical benchmarking study of a selection of wave energy converters

Falc˜ao, 2009, Wave energy utilization: a review of technologies, Renewable and Sustainable Energy Reviews, 14, 899, 10.1016/j.rser.2009.11.003

Meyer, 2002

Previsic, 2004

Mulligan, 2008, A simple model for estimating newbuilding costs, Maritime Economics & Logistics, 10, 310, 10.1057/mel.2008.8

Babarit, 2011

Masuda, 1996, Regarding BBDB wave power generating plant, 1

Nielsen, 2010

Young, 1999

Folley, 2009, Analysis of the nearshore wave energy resource, Renewable Energy, 34, 1709, 10.1016/j.renene.2009.01.003

Evans, 1985

Pizer, 1992

Payne, 2008, Assessment of boundary-element method for modelling a free-floating sloped wave energy device. Part 2: experimental validation, Ocean Engineering, 35, 342, 10.1016/j.oceaneng.2007.10.008

Durand, 2007, Experimental validation of the performances of the SEAREV wave energy converter with real time latching control

Folley, 2007, The design of small seabed-mounted bottom-hinged wave energy converters

Kerbiriou, 2007, Influence of an improved sea-state description on a wave energy converter production

Molin, 2002

Hals, 2002, Optimum reactive control and control by latching of a wave-absorbing semisubmerged heaving sphere, 1

2006

Delhommeau, 1993, Seakeeping codes aquadyn and aquaplus

Morison, 1950, The forces exerted by surface waves on piles, Petroleum Transactions of AIME, 189, 149

Henderson, 2006, Design, simulation and testing of a novel hydraulic power take-off system for the pelamis wave energy converter, Renewable Energy, 31, 271, 10.1016/j.renene.2005.08.021

Eriksson M. Modelling and experimental verification of direct drive wave energy conversion - Buoy - generator dynamics, PhD thesis, Uppsala Universitet; 2007.

Ruellan, 2010, Design methodology for a SEAREV wave energy converter, IEEE Transactions on Energy Conversion, 25, 760, 10.1109/TEC.2010.2046808

Suzuki, 2006, Design method of guide vane for wells turbine, Journal of Thermal Science, 15, 126, 10.1007/s11630-006-0126-3

Budal, 1981, Model experiment with a phase controlled point absorber, 23

Duclos, 2006, Power take off damping optimisation with regard to wave climate, ASME Journal of Offshore Mechanics and Arctic Engineering, 128, 56, 10.1115/1.2163877

Babarit, 2009, Declutching control of a wave energy converter, Ocean Engineering, 36, 1015, 10.1016/j.oceaneng.2009.05.006

Falcao, 2008, Phase control through load control of oscillating-body wave energy converter with hydraulic PTO system, Ocean Engineering, 35, 358, 10.1016/j.oceaneng.2007.10.005

Cretel, 2010, An application of model predictive control to a wave energy point absorber

Hals, 2011, A comparison of selected strategies for adaptive control of wave energy converters, Journal of Offshore Mechanics and Arctic Engineering, 133, 10.1115/1.4002735

Blondel, 2010, Deterministic non-linear wave prediction using probe data, Ocean Engineering, 37, 913, 10.1016/j.oceaneng.2010.03.002

Muliawan, 2011, Analysis of a two-body floating wave energy converter with particular focus on the effect of mooring system on energy capture

Vicente, 2011, Slack-chain mooring configuration analysis of a floating wave energy converter

Mouwen, 2008

Kramer, 2011

Pecher, 2010, Results of an experimental study of the Langlee wave energy converter

Henry, 2010, Advances in the design of the Oyster wave energy converter

Marintek, 2008

DNV, 2004

De Backer, 2010, Power absorption by closely spaced point absorbers in constrained conditions, IET Renewable Power Generation, 4, 579, 10.1049/iet-rpg.2009.0188

Salter, 2002, Power conversion mechanisms for wave energy, 216, 1

Aubry, 2010, Energy storage system for smoothing power generation of direct wave energy converters