Nozzle design for combined use of MQL and cryogenic gas in machining

Klocke, F., Krämer, K., Sangermann, H., and Lung, D., “Thermo-Mechanical Tool Load during High Performance Cutting of Hard-to-Cut Materials,” Procedia CIRP, Vol. 1, pp. 295–300, 2012.

Bhatt, A., Attia, H., Vargas, R., and Thomson, V., “Wear Mechanisms of WC Coated and Uncoated Tools in Finish Turning of Inconel 718,” Tribology International, Vol. 43, No. 5, pp. 1113–1121, 2010.

Hosokawa, A., Ueda, T., Onishi, R., Tanaka, R., and Furumoto, T., “Turning of Difficult-to-Machine Materials with Actively Driven Rotary Tool,” CIRP Annals-Manufacturing Technology, Vol. 59, No. 1, pp. 89–92, 2010.

Thakur, D. G., Ramamoorthy, B., and Vijayaraghavan, L., “Study on the Machinability Characteristics of Superalloy Inconel 718 during High Speed Turning,” Materials and Design, Vol. 30, No. 5, pp. 1718–1725, 2009.

Costes, J. P., Guillet, Y., Poulachon, G., and Dessoly, M., “Tool-Life and Wear Mechanisms of CBN Tools in Machining of Inconel 718,” International Journal of Machine Tools and Manufacture, Vol. 47, pp. 1081–1087, 2007.

Klocke, F., Klink, A., Veselovac, D., Keith, D., Leung, S., et al., “Turbomachinery Component Manufacture by Application of Electrochemical, Electro-Physical and Photonic Processes,” CIRP Annals-Manufacturing Technology, Vol. 63, pp. 703–706, 2014.

Klocke, F. and Eisenblatter, G., “Dry Cutting,” CIRP Annals-Manufacturing Technology, Vol. 46, No. 2, pp. 519–526, 1997.

Jerold, B. D. and Kumar, M. P., “Experimental Investigation of Turning AISI 1045 Steel Using Cryogenic Carbon Dioxide as the Cutting Fluid,” Journal of Manufacturing Processes, Vol. 13, No. 2, pp. 113–119, 2011.

Byrne, G., Dornfeld, D., and Denkena, B., “Advancing Cutting Technology,” CIRP Annals-Manufacturing Technology, Vol. 52, No. 2, pp. 483–507, 2003.

Cetin, M., Ozcelik, B., Kuram, E., and Demirbas, E., “Evaluation of Vegetable Based Cutting Fluids with Extreme Pressure and Cutting Parameters in Turning of AISI 304L by Taguchi Method,” Journal of Cleaner Production, Vol. 19, No. 17, pp. 2049–2056, 2011.

Park, K., Olortegui-Yume, J., Yoon, M., and Kwon, P., “A Study on Droplets and Their Distribution for Minimum Quantity Lubrication (MQL),” International Journal of Machine Tools and Manufacture, Vol. 50, No. 9, pp. 824–833, 2010.

Shokrani, A., Dhokia, V., and Newman, S., “Environmentally Conscious Machining of Difficult-to-Machine Materials with Regard to Cutting Fluids,” International Journal of Machine Tools and Manufacture, Vol. 57, pp. 83–101, 2012.

Herrmann, C, Schmidt, C., Kurle, D., Blume, S., and Thiede, S., “Sustainability in Manufacturing and Factories of the Future,” Int. J. Precis. Eng. Manuf.-Green Tech., Vol. 1, No. 4, pp. 283–292, 2014.

Jang, D., Jung, J., and Seok, J., “Modeling and Parameter Optimization for Cutting Energy Reduction in MQL Milling Process,” Int. J. Precis. Eng. Manuf.-Green Tech., Vol. 3, No. 1, pp. 5–12, 2016.

Dureja, J., Singh, R., Singh, T., Dogra, M., and Batti, M., “Performance Evaluation of Coated Carbide Tool in Machining of Stainless Steel (Aisi 202) under Minimum Quantity Lubrication (MQL),” Int. J. Precis. Eng. Manuf.-Green Tech., Vol. 2, No. 2, pp. 123–129, 2015.

De Lacalle, L. L., Angulo, C., Lamikiz, A., and Sanchez, J., “Experimental and Numerical Investigation of the Effect of Spray Cutting Fluids in High Speed Milling,” Journal of Materials Processing Technology, Vol. 172, No. 1, pp. 11–15, 2006.

Pereira, O., Rodríguez, A., Fernández-Abia, A., Barreiro, J., and De Lacalle, L. L., “Cryogenic and Minimum Quantity Lubrication for an Eco-Efficiency Turning of AISI 304,” Journal of Cleaner Production, Vol. 139, pp. 440–449, 2016.

Pusavec, F., Deshpande, A., Yang, S., M’Saoubi, R., Kopac, J., et al., “Sustainable Machining of High Temperature Nickel Alloy-Inconel 718: Part 1-Predictive Performance Models,” Journal of Cleaner Production, Vol. 81, pp. 255–269, 2014.

Machai, C., Iqbal, A., Biermann, D., Upmeier, T., and Schumann, S., “On the Effects of Cutting Speed and Cooling Methodologies in Grooving Operation of Various Tempers of I2-Titanium Alloy,” Journal of Materials Processing Technology, Vol. 213, No. 7, pp. 1027–1037, 2013.

Stephenson, D., Skerlos, S., King, A., and Superkar, S., “Rough Turning Inconel 750 with Supercritical CO2-based Minimum Quantity Lubrication,” Journal of Materials Processing Technology, Vol. 214, pp. 673–680, 2014.

Supekar, S., Clarens, A., Stephenson, D., and Skerlos, S., “Performance of Supercritical Carbon Dioxide Sprays as Coolants and Lubricants in Representative Metalworking Operations,” Journal of Materials Processing Technology, Vol. 212, No. 12, pp. 2652–2658, 2012.

Clarens, A., Hayes, K., and Skerlos, S., “Feasibility of Metalworking Fluid Delivered in Supercritical Carbón Dioxide,” Journal of Manufacturing Processes, Vol. 8, No. 1, pp. 47–53, 2006.

Jackson, D. P., “Nozzle Device and Method for Forming Cryogenic Composite Fluid Spray,” US Patent, No. 7389941 B2, 2008.

Shih, T. H., Liou, W. W., Shabbir, A., Yang, Z., and Zhu, J., “A New K-Ε Eddy Viscosity Model for High Reynolds Number Turbulent Flows,” Computers and Fluids, Vol. 24, No. 3, pp. 227–238, 1995.

Cotas, C., Silva, R., García, F., Faia, P., Asendrych, D., et al., “Application of Different Low-Reynolds K-ε Turbulence Models to Model the Flow of Concentrated Pulp Suspension in Pipes,” Procedia Engineering, Vol. 102, pp. 1326–1335, 2015.

Duchosal, A., Serra, T., Leroy, R., and Louste, C., “Numerical Steady Prediction of Spitting Effect for Different Internal Canalization Geometries Used in MQL Machining Strategy,” Journal of Manufacturing Processes, Vol. 20, pp. 149–161, 2015.

Obikawa, T., Asano, Y., and Kamata, Y., “Computer Fluid Dynamics Analysis for Efficient Spraying of Oil Mist in Finishing Turning of Inconel 718,” International Journal of Machine Tools and Manufacture, Vol. 49, No. 12, pp. 971–978, 2009.

Reynolds, W., “Fundamentals of Turbulence for Turbulence Modeling and Simulation,” http://oai.dtic.mil/oai/oai?verb=getRecord &metadataPrefix=html&identifier=ADP005793 (Accessed 24 December 2016)

Shih, T. H., Zhu, J., and Lumley, J. L., “A New Reynolds Stress Algebraic Equation Model,” Computer Methods in Applied Mechanics and Engineering, Vol. 125, No. 1, pp. 287–302, 1995.

Park, K. H., Olortegui-Yume, J., Yoon, M. C., and Kwon, P., “A Study on Droplets and Their Distribution for Minimum Quantity Lubrication (MQL),” International Journal of Machine Tools and Manufacture, Vol. 50, No. 9, pp. 824–833, 2010.

De Lacalle, L. L., Perez-Bilbatua, J., Sánchez, J., Llorente, J., Gutierrez, A., et al., “Using High Pressure Coolant in the Drilling and Turning of Low Machinability Alloys,” Journal of Advanced Manufacturing Technology, Vol. 16, No. 2, pp. 85–91, 2000.

Fernández-Valdivielso, A., De Lacalle, L. L., Urbikain, G., and Rodríguez, A., “Detecting the Key Geometrical Features and Grades of Carbide Inserts for the Turning of Nickel-Based Alloys Concerning Surface Integrity,” Journal of Mechanical Engineering Science, Article ID: 0954406215616145, 2015.

Urbicain, G., Palacios, J., Fernández, A., Rodríguez, A., De Lacalle, L. L., et al., “Stability Prediction Maps in Turning of Difficult-to-Cut Materials,” Procedia Engineering, Vol. 63, pp. 514–522, 2013.

Choudhury, I. and El-Baradie, M., “Machinability of Nickel-Base Super Alloys: A General Review,” Journal of Materials Processing Technology, Vol. 77, No. 1, pp. 278–284, 1998.