Novel technique of friction extrusion self-refilling for repairing keyhole of flat clinched joint

Muhammad, 2020, Evaluation of capabilities of ultrasonic vibration on the surface, electrical and mechanical behaviours of aluminium to copper dissimilar friction stir welds, Int J Mech Sci, 183, 10.1016/j.ijmecsci.2020.105784 Niu, 2020, Joint formation mechanism and performance of resistance rivet welding (RRW) for aluminum alloy and press hardened steel, J Mater Process Technol, 286, 10.1016/j.jmatprotec.2020.116830 Feng, 2020, Refill friction stir spot welding of similar and dissimilar alloys: a review, Acta Metallurgica Sinica (English Letters), 33, 30, 10.1007/s40195-019-00982-4 Lüder, 2014, Influence of the moisture content on flat-clinch connection of wood materials and aluminium, J Mater Process Technol, 214, 2069, 10.1016/j.jmatprotec.2014.01.010 Gerstmann, 2020, Hybrid joining: numerical process development of flat-clinch-bonding, J Mater Process Technol, 277, 10.1016/j.jmatprotec.2019.116421 Chen, 2021, Investigation of flat-clinching process using various thicknesses aluminum alloy sheets, Int J Adv Manuf Technol, 114, 2075, 10.1007/s00170-021-06981-z Abe, 2020, Mechanical clinching and self-pierce riveting of thin three sheets of 5000 series aluminium alloy and 980MPa grade cold rolled ultra-high strength steel, Materials (Basel), 13, 4741, 10.3390/ma13214741 Kim, 2021, Development of analytical strength estimator for self-piercing rivet joints through observation of finite element simulations, Int J Mech Sci, 202-203, 10.1016/j.ijmecsci.2021.106499 Ying, 2021, Towards joinability of thermal self-piercing riveting for AA7075-T6 aluminum alloy sheets under quasi-static loading conditions, Int J Mech Sci, 189, 10.1016/j.ijmecsci.2020.105978 Chen, 2020, Investigation of the flat-clinching process for joining three-layer sheets on thin-walled structures, Thin Walled Struct, 157, 10.1016/j.tws.2020.107034 Shi, 2022, Experimental investigation of the flat clinch–rivet process, Thin Walled Struct, 171, 10.1016/j.tws.2021.108612 Zhang, 2022, Microstructure and mechanical properties of probeless friction stir extrusion joined joints of 6061-T6 aluminum alloy to Q235 steel, Int J Adv Manuf Technol, 119, 3029, 10.1007/s00170-021-08363-x Yapici, 2021, On the fatigue and fracture behavior of keyhole-free friction stir spot welded joints in an aluminum alloy, J Mater Res Technol, 11, 40, 10.1016/j.jmrt.2021.01.006 Zhang, 2022, Bonding mode and mechanical properties of keyhole-free friction stir rivet welded aluminum alloy joints, J Mater Res Technol, 18, 185, 10.1016/j.jmrt.2022.02.097 Ji, 2016, New technique for eliminating keyhole by active-passive filling friction stir repairing, Mater Des, 97, 175, 10.1016/j.matdes.2016.02.088 Gong, 2022, A novel non-keyhole friction stir welding process, J Manuf Process, 73, 17, 10.1016/j.jmapro.2021.10.067 Fu, 2021, Revealing joining mechanism in refill friction stir spot welding of AZ31 magnesium alloy to galvanized DP600 steel, Mater Des, 209, 10.1016/j.matdes.2021.109997 Alaeibehmand, 2021, Pinless FSSW of DP600/Zn/AA6061 dissimilar joints, J Mater Res Technol, 15, 996, 10.1016/j.jmrt.2021.08.071 Huang, 2018, Drilling-filling friction stir repairing of AZ31B magnesium alloy, J Mater Process Technol, 255, 765, 10.1016/j.jmatprotec.2018.01.019 Reimann, 2017, Microstructure and mechanical properties of keyhole repair welds in AA 7075-T651 using refill friction stir spot welding, Mater Des, 132, 283, 10.1016/j.matdes.2017.07.013 Han, 2013, AA7075 bit for repairing AA2219 keyhole by filling friction stir welding, Mater Des, 51, 25, 10.1016/j.matdes.2013.03.089 Li, 2020, Self-consumption friction plug spot welding of Ti–6Al–4V plates, J Mater Res Technol, 9, 14283, 10.1016/j.jmrt.2020.10.029 Shi, 2018, Refill friction stir spot welding of 2198-T8 aluminum alloy, Trans Indian Inst Met, 71, 139, 10.1007/s12666-017-1146-2 Camila, 2022, Tool wear mechanisms and effects on refill friction stir spot welding of AA2198-T8 sheets, J Mater Res Technol Sun, 2020, Effect of sleeve plunge depth on interface/mechanical characteristics in refill friction stir spot welded joint, Acta Metallurgica Sinica (English Letters), 33, 551, 10.1007/s40195-019-00968-2 Chu, 2018, Microstructure and mechanical optimization of probeless friction stir spot welded joint of an Al-Li alloy, J Mater Sci Technol, 34, 1739, 10.1016/j.jmst.2018.03.009 Larsen, 2020, Investigating steel tool life in the RFSSW process, J Manuf Process, 58, 637, 10.1016/j.jmapro.2020.07.034 Xu, 2016, Pinless friction stir spot welding of Mg‒3Al‒1Zn Alloy with Zn interlayer, J Mater Sci Technol, 32, 76, 10.1016/j.jmst.2015.08.012 Özgül, 2020, Investigations of the mechanical and microstructural effects of pinless tool geometry on friction stir spot welding process, Trans Indian Inst Met, 73, 2281, 10.1007/s12666-020-02034-3 Yazdi, 2019, Pinless tool for FSSW of AA 6061-T6 aluminum alloy, J Mater Process Technol, 267, 44, 10.1016/j.jmatprotec.2018.12.005 Oladimeji, 2016, Understanding the role of welding parameters and tool profile on the morphology and properties of expelled flash of spot welds, Mater Des, 108, 518, 10.1016/j.matdes.2016.07.013 Chu, 2016, Microstructure and mechanical behaviour of pinless friction stir spot welded AA2198 joints, Sci Technol Weld Join, 21, 164, 10.1179/1362171815Y.0000000078 Liu, 2021, A novel friction stir spot riveting of Al/Cu dissimilar materials, Acta Metallurgica Sinica (English Letters), 34, 135, 10.1007/s40195-020-01092-2 Huang, 2019, New technique of friction-based filling stacking joining for metal and polymer, Composites Part B: Engineering, 163, 217, 10.1016/j.compositesb.2018.11.050 Reimann, 2017, Refilling termination hole in AA 2198–T851 by refill friction stir spot welding, J Mater Process Technol, 245, 157, 10.1016/j.jmatprotec.2017.02.025 Sajed, 2020, Multilayer friction stir plug welding: a novel solid-state method to repair cracks and voids in thick aluminum plates, CIRP J Manuf Sci Technol, 31, 467, 10.1016/j.cirpj.2020.07.009 Prakash, 2011, Refilling probe hole of friction spot joints by friction forming, Mater Manuf Processes, 26, 1539, 10.1080/10426914.2011.551959 Chu, 2018, Numerical analysis of material flow in the probeless friction stir spot welding based on Coupled Eulerian-Lagrangian approach, J Manuf Process, 36, 181, 10.1016/j.jmapro.2018.10.013 Venukumar, 2014, Static shear strength and fatigue life of refill friction stir spot welded AA 6061-T6 sheets, Sci Technol Weld Join, 19, 214, 10.1179/1362171813Y.0000000181 Du, 2016, Characteristics of friction plug welding to 10mm thick AA2219-T87 sheet: weld formation, microstructure and mechanical property, Mater Sci Eng: A, 654, 21, 10.1016/j.msea.2015.12.019 Huang, 2012, Interface behaviours and mechanical properties of filling friction stir weld joining AA 2219, Sci Technol Weld Join, 17, 225, 10.1179/1362171811Y.0000000100 Huang, 2011, New technique of filling friction stir welding, Sci Technol Weld Join, 16, 497, 10.1179/1362171811Y.0000000032 Muhayat, 2019, Mechanical properties and microstructure of friction stir spot welded 6082-T6 aluminium alloy joint, MATEC Web Conf., 269, 01005, 10.1051/matecconf/201926901005 Peng, 2020, Recent development of improved clinching process, Int J Adv Manuf Technol, 110, 3169, 10.1007/s00170-020-05978-4 Härtel, 2017, Heat generation during mechanical joining processes – by the example of flat-clinching, Procedia Eng, 184, 251, 10.1016/j.proeng.2017.04.093 Chen, 2021, Effects of sheet thickness and material on the mechanical properties of flat clinched joint, Front Mech Eng, 16, 410, 10.1007/s11465-020-0618-y Han, 2016, Optimization of geometrical design of clinching tools in flat-clinching, 231, 4012 Yang, 2019, Microstructure and properties of probeless friction stir spot welding of AZ31 magnesium alloy joints, Trans Nonferrous Metal Soc China, 29, 2300, 10.1016/S1003-6326(19)65136-8 Senapati, 2021, Improving the strength of friction-stir-welded joints of AA1100 Alloy, J Mater Eng Perform, 30, 510, 10.1007/s11665-020-05331-6 Khalkhali, 2018, Comprehensive optimization of friction stir weld parameters of lap joint AA1100 plates using artificial neural networks and modified NSGA-II, Mater Res Express, 5, 10.1088/2053-1591/aac6f6 Society, 2012, Test methods for evaluating the resistance spot welding behavior of automotive sheet steel materials, AWS, 2012 Bozzi, 2010, Influence of FSSW parameters on fracture mechanisms of 5182 aluminium welds, J Mater Process Technol, 210, 1429, 10.1016/j.jmatprotec.2010.03.022 Zhu, 2016, Simulation of material plastic flow driven by non-uniform friction force during friction stir welding and related defect prediction, Mater Des, 108, 400, 10.1016/j.matdes.2016.06.119 Xie, 2022, Ameliorating strength-ductility efficiency of graphene nanoplatelet-reinforced aluminum composites via deformation-driven metallurgy, Compos Sci Technol, 219, 10.1016/j.compscitech.2021.109225 Li, 2018, Microstructure and morphology evolution of probeless friction stir spot welded joints of aluminum alloy, J Mater Process Technol, 252, 69, 10.1016/j.jmatprotec.2017.09.003 Yi, 2016, Effect of cooling rate on microstructure of friction-stir welded AA1100 aluminum alloy, Philos Mag, 96, 1965, 10.1080/14786435.2016.1185186 Schmidt, 2003, An analytical model for the heat generation in friction stir welding, Modell Simul Mater Sci Eng, 12, 143, 10.1088/0965-0393/12/1/013 Baruah, 2021, Numerically modelled study of the plunge stage in friction stir spot welding using multi-tiered mesh partitions, Eng Res Express, 3, 10.1088/2631-8695/ac352e Sajed, 2016, Parametric study of two-stage refilled friction stir spot welding, J Manuf Process, 24, 307, 10.1016/j.jmapro.2016.09.011 Chang, 2004, Relationship between grain size and Zener–Holloman parameter during friction stir processing in AZ31 Mg alloys, Scr Mater, 51, 509, 10.1016/j.scriptamat.2004.05.043 Andrade, 2021, Analysis of contact conditions and its influence on strain rate and temperature in friction stir welding, Int J Mech Sci, 191, 10.1016/j.ijmecsci.2020.106095 Abnar, 2015, Effects of heat input in friction stir welding on microstructure and mechanical properties of AA3003-H18 plates, Trans Nonferrous Metal Soc China, 25, 2147, 10.1016/S1003-6326(15)63826-2 Suryanarayanan, 2020, Effect of process parameters in pinless friction stir spot welding of Al 5754-Al 6061 alloys, Metallogr Microstruct Anal, 9, 261, 10.1007/s13632-020-00626-5 Cui, 2015, Critical dimensions of tensile-shear specimen for resistance spot welds, Appl Mech Mater, 782, 177, 10.4028/www.scientific.net/AMM.782.177 Farmanbar, 2019, Achieving special mechanical properties with considering dwell time of AA5052 sheets welded by a simple novel friction stir spot welding, Mar Struct, 65, 197, 10.1016/j.marstruc.2019.01.010 Mahmoud, 2014, Microstructural and mechanical characteristics of aluminum alloy AA5754 friction stir spot welds, J Mater Eng Perform, 23, 898, 10.1007/s11665-013-0828-0 Li, 2016, Effect of rotational speed on microstructure and mechanical properties of refill friction stir spot welded 2024 Al alloy, J Mater Eng Perform, 25, 1673, 10.1007/s11665-016-1999-2 Rana, 2018, Effect of rotational speed on friction stir spot welding of AA5052-H32/HDPE/AA5052-H32 sandwich sheets, J Mater Process Technol, 252, 511, 10.1016/j.jmatprotec.2017.10.016 Meng, 2021, Recent progress on control strategies for inherent issues in friction stir welding, Prog Mater Sci, 115, 10.1016/j.pmatsci.2020.100706 Kumma, 2020, Effect of blank holder force and edge radius on joining strength in flat-clinching process, Key Eng Mater, 856, 175, 10.4028/www.scientific.net/KEM.856.175 Yang, 2018, Numerical modelling and experimental investigation of thermal and material flow in probeless friction stir spot welding process of Al 2198-T8, Sci Technol Weld Join, 23, 704, 10.1080/13621718.2018.1469832 Shi, 2020, Forming mechanism of the repairing process on clinched joint, J Manuf Process, 50, 329, 10.1016/j.jmapro.2019.12.025 Li, 2014, Improving mechanical properties of pinless friction stir spot welded joints by eliminating hook defect, Mater Des, 62, 247, 10.1016/j.matdes.2014.05.028 Venukumar, 2013, Comparison of microstructure and mechanical properties of conventional and refilled friction stir spot welds in AA 6061-T6 using filler plate, Trans Nonferrous Metal Soc China, 23, 2833, 10.1016/S1003-6326(13)62804-6