Novel nanocomposite super absorbent polymers reinforced by clay nanosheets

Pleiades Publishing Ltd - Tập 89 - Trang 324-329 - 2016
Zhiling Zhou1, Zhaozhong Yang2, Chaoping Liu3
1College of Materials and Chemistry & Chemical Engineering, Chengdu University of Technology, Chengdu, China
2State Key Laboratory of Oil and Gas Reservoir Geology and Exploitation, Southwest Petroleum University, Chengdu, Sichuan, China
3Xinjiang Petroleum Investigation Design and Research Institute, Central Asia Branch, Xinjiang, China

Tóm tắt

Super absorbent polymers (SAPs) are of great significance in industry and personal care, etc. The study aims to introduce novel nanocomposite SAPs that are able to uptake very high water content while maintaining excellent strength. The polymers are synthesized by in situ polymerization with the presence of exfoliated montmorillonite (MMT) and trace amount of crosslinkers. SEM images show macroporous structures of these nanocomposites, while TEM images demonstrate excellent distribution of the MMT nanosheets in the polymer matrix. The effect of clay content on the equilibrium water uptake has been systematically investigated. More importantly, the highly swollen nanocomposite SAPs show very high tensile strength (up to 550 kPa), which is much higher than those reported in literature and used in the market. These SAPs with high water uptake and strength may find applications in agriculture and oil fields.

Tài liệu tham khảo

Lee, W.F. and Yang, L.G., J. Appl. Polymer Sci., 2004, vol. 92, p. 3422. Viseras, C., Cerezo, P., Sanchez, R., Salcedo, I., and Aguzzi, C., Appl. Clay Sci., 2010, vol. 48, p. 291. Aalaie, J., Vasheghani-Farahani, E., Rahmatpour, A., and Semsarzadeh, M.A., Eur. Polymer J., 2008, vol. 44, p. 2024. Haraguchi, K., Cur. Opinion Solid State & Materials Sci., 2007, vol. 11, p. 47. Haraguchi, K. and Takehisa, T., Adv. Materials, 2002, vol. 14, p. 1120. Haraguchi, K. and Li, H.J., Macromol., 2006, vol. 39, p. 1898. Wang, W., Liu, Y., and Gu, Y., Colloid & Polymer Sci., 2003, vol. 281, p. 1046. Zolfaghari, R., Katbab, A.A., Nabavizadeh, J., Tabasi, R.Y., and Nejad, M.H., J. Appl. Polymer Sci., 2006, vol. 100, p. 2096. Xu, K., Wang, J., Xiang, S., Chen, Q., Zhang, W., and Wang, P., Appl. Clay Sci., 2007, vol. 38, p. 139. Du, J., Chen, P., Adalati, A., Xu, S., Wu, R., Wang, J., et al., J. Polymer Res., 2014, vol. 21, p. 1. Zhu, M., Xiong, L., Wang, T., Liu, X., Wang, C., and Tong, Z., Reactive & Func. Polymers, 2010, vol. 70, p. 267. Hu, Z. and Chen, G., Adv. Materials, 2014, vol. 26, p. 5950. Haraguchi, K., Uyama, K., and Tanimoto, H., Macromol. Rapid Comm., 2011, vol. 32, p. 1253. Akelah, A. and Moet, A., J. Mat. Sci., 1996, vol. 31, p. 3589. Mansoori, Y., Atghia, S.V., Zamanloo, M.R., Imanzadeh, G., and Sirousazar, M., Eur. Polymer J., 2010, vol. 46, p. 1844. Janovak, L., Varga, J., Kemeny, L., and Dekany, I., Appl. Clay Sci., 2009, vol. 43, p. 260. Liu, Y., Zhu, M., Liu, X., Zhang, W., Sun, B., Chen, Y., et al., Polymer, 2006, vol. 47, p. 1.