Novel method for burrs quantitative evaluation in micro-milling

Lauro, 2015, Surface integrity in the micromachining: a review, Rev Adv Mater Sci, 40 2013 Bissacco, 2006, Size effects on surface generation in micro milling of hardened tool steel, CIRP Ann - Manuf Technol, 55, 593, 10.1016/S0007-8506(07)60490-9 Aramcharoen, 2009, Size effect and tool geometry in micromilling of tool steel, Precis Eng, 33, 402, 10.1016/j.precisioneng.2008.11.002 Kumar, 2017, Recent advances in characterization, modeling and control of burr formation in micro-milling, Manuf Lett, 13, 1, 10.1016/j.mfglet.2017.04.002 Cardoso, 2012, A brief review on micromachining of materials, Rev Adv Mater Sci, 30, 98 Jahanmir, 2001, Surface integrity in ultrahigh speed micromachining, Proced Eng, 19, 156, 10.1016/j.proeng.2011.11.095 Filiz, 2007, An experimental investigation of micro-machinability of copper 101 using tungsten carbide micro-endmills, Int J Mach Tool Manufact, 47, 1088, 10.1016/j.ijmachtools.2006.09.024 Özel, 2011, Experiments and finite element simulations on micro-milling of Ti–6Al–4V alloy with uncoated and cBN coated micro-tools, CIRP Ann - Manuf Technol, 60, 85, 10.1016/j.cirp.2011.03.087 Camara, 2012, State of the art on micromilling of materials, a review, J Mater Sci Technol, 28, 673, 10.1016/S1005-0302(12)60115-7 Bruschi, 2016, Environmentally clean micromilling of electron beam melted Ti6Al4V, J Clean Prod, 133, 932, 10.1016/j.jclepro.2016.06.035 Parenti, 2017, Surface footprint in molds micromilling and effect on part demoldability in micro injection molding, J Manuf Process, 29, 160, 10.1016/j.jmapro.2017.05.024 Aurich, 2009, Burr-Analysis, control and removal, CIRP Ann - Manuf Technol, 58, 519, 10.1016/j.cirp.2009.09.004 Leopold, 2004, vol. 1860, 223 Ko, 2006, Development of an effective measurement system for burr geometry, Proc IME B J Eng Manuf, 220, 507, 10.1243/09544054JEM246 Tsai, 1996, Detecting and locating burr of industrial parts, Int J Prod Res, 34, 3187, 10.1080/00207549608905084 Nakao, 2006, Measurements and evaluations of drilling burr profile, Proc IME B J Eng Manuf, 220, 513, 10.1243/095440505X32625 Toropov, 2007, An effective visualization and analysis method for edge measurement, 941 Hansen, 2006, Dimensional micro and nano metrology, CIRP Ann, 55, 721, 10.1016/j.cirp.2006.10.005 2011, vol. 14, 326 ISO 4287:1997 Geometrical Product Specifications (GPS) - Surface texture: Profile method - Terms, definitions and surface texture parameters. ISO 4288: 1996 Geometrical Product Specifications (GPS) - surface texture: profile method - rules and procedures for the assessment of surface texture. ISO 5436-1:2000 Geometrical product specifications (GPS) - Surface texture: profile method - Part 1: material measures. Canny, 1987, A computational approach to edge detection, 184 Parker, 2010 Uriarte, 2007, Error budget and stiffness chain assessment in a micromilling machine equipped with tools less than 0.3 mm in diameter, Precis Eng, 31, 1, 10.1016/j.precisioneng.2005.11.010 De Lacalle, 2006, Recording of real cutting forces along the milling of complex parts, Mechatronics, 16, 21, 10.1016/j.mechatronics.2005.09.001 Lekkala, 2011, Characterization and modeling of burr formation in micro-end milling, Precis Eng, 35, 625, 10.1016/j.precisioneng.2011.04.007 Hashimura, 1999, Effect of in-plane exit angle and rake angles on burr height and thickness in face milling operation, J Manuf Sci Eng, 121, 13, 10.1115/1.2830566 Davoudinejad, 2017, Influence of the worn tool affected by built-up edge (BUE) on micro end-milling process performance: a 3D finite element modeling investigation, Int J Precis Eng Manuf, 18, 1321, 10.1007/s12541-017-0157-6 Bajpai, 2013, Burr formation and surface quality in high speed micromilling of titanium alloy (Ti6Al4V)