Novel fatigue strengthening solution for metallic structures using adhesively bonded Fe-SMA strips: A proof of concept study

Duong, 2006, Analytical and experimental study of load attractions and fatigue crack growths in two-sided bonded repairs, Compos Struct, 73, 394, 10.1016/j.compstruct.2005.02.011 Baker, 1984, Repair of cracked or defective metallic aircraft components with advanced fibre composites—an overview of Australian work, Compos Struct, 2, 153, 10.1016/0263-8223(84)90025-4 Teng, 2012, Strengthening of steel structures with fiber-reinforced polymer composites, J Constr Steel Res, 78, 131, 10.1016/j.jcsr.2012.06.011 Ghafoori, 2018, Prestressed CFRP-strengthening and long-term wireless monitoring of an old roadway metallic bridge, Eng Struct, 176, 585, 10.1016/j.engstruct.2018.09.042 Izadi, 2019, Thermally activated iron-based shape memory alloy for strengthening metallic girders, Thin-Walled Struct, 141, 389, 10.1016/j.tws.2019.04.036 El-Tahan, 2015, Development of a self-stressing NiTiNb shape memory alloy (SMA)/fiber reinforced polymer (FRP) patch, Smart Mater Struct, 24, 10.1088/0964-1726/24/6/065035 Colombi, 2003, Delamination effects on cracked steel members reinforced by prestressed composite patch, Theor Appl Fract Mech, 39, 61, 10.1016/S0167-8442(02)00138-6 Shahin, 2005, Shape memory alloy wire reinforced composites for structural damage repairs, Mech Adv Mater Struct, 12, 425, 10.1080/15376490500259251 Cheng, 2007, Analysis of an adhesively bonded single-strap joint integrated with shape memory alloy (SMA) reinforced layers, Int J Solids Struct, 44, 3557, 10.1016/j.ijsolstr.2006.10.007 Zheng, 2017, Fatigue strengthening of metallic structures with a thermally activated shape memory alloy fiber-reinforced polymer patch, J Compos Constr, 21, 04016113, 10.1061/(ASCE)CC.1943-5614.0000776 Hosseini, 2017, Mode I fatigue crack arrest in tensile steel members using prestressed CFRP plates, Compos Struct, 178, 119, 10.1016/j.compstruct.2017.06.056 Hosseini, 2019, Mixed mode I/II fatigue crack arrest in steel members using prestressed CFRP reinforcement, Int J Fatigue, 127, 345, 10.1016/j.ijfatigue.2019.06.020 Hosseini, 2018, Short-term bond behavior and debonding capacity of prestressed CFRP composites to steel substrate, Eng Struct, 176, 935, 10.1016/j.engstruct.2018.09.025 Zheng, 2017, Fatigue crack growth analysis of steel elements reinforced with shape memory alloy (SMA)/fiber reinforced polymer (FRP) composite patches, Compos Struct, 164, 158, 10.1016/j.compstruct.2016.12.077 Li, 2020, Heat activated SMA-CFRP composites for fatigue strengthening of cracked steel plates, J Compos Constr, 24, 04020060, 10.1061/(ASCE)CC.1943-5614.0001072 Izadi, 2018, Development of an iron-based shape memory alloy (Fe-SMA) strengthening system for steel plates, Eng Struct, 174, 433, 10.1016/j.engstruct.2018.07.073 Izadi, 2018, Iron-based shape memory alloy for the fatigue strengthening of cracked steel plates: effects of re-activations and loading frequencies, Eng Struct, 176, 953, 10.1016/j.engstruct.2018.09.021 Ghafoori, 2019, Elevated temperature behavior of an iron-based shape memory alloy used for prestressed strengthening of civil structures, Constr Build Mater, 211, 437, 10.1016/j.conbuildmat.2019.03.098 Ghafoori, 2012, Fatigue strengthening of damaged metallic beams using prestressed unbonded and bonded CFRP plates, Int J Fatigue, 44, 303, 10.1016/j.ijfatigue.2012.03.006 Ghafoori, 2012, Fatigue behavior of notched steel beams reinforced with bonded CFRP plates: determination of prestressing level for crack arrest, Eng Struct, 45, 270, 10.1016/j.engstruct.2012.06.047 Wang, 2020, On the finite width correction factor in prediction models for fatigue crack growth in built-up bonded structures, Eng Fract Mech, 10.1016/j.engfracmech.2020.107156 Wang, 2017, Prediction methodology for fatigue crack growth behaviour in fibre metal laminates subjected to tension and pin loading, Compos Struct, 182, 176, 10.1016/j.compstruct.2017.09.047 Wang, 2017, Analytical prediction model for non-symmetric fatigue crack growth in fibre metal laminates, Int J Fatigue, 103, 546, 10.1016/j.ijfatigue.2017.06.035 Dong, 2009, A Novel Fe-Mn-Si Shape Memory Alloy With Improved Shape Recovery Properties by VC Precipitation, Adv Eng Mater, 11, 40, 10.1002/adem.200800312 Hosseini, 2018, Stress recovery and cyclic behaviour of an Fe–Mn–Si shape memory alloy after multiple thermal activation, Smart Mater Struct, 27, 10.1088/1361-665X/aaa2c9 Ghafoori, 2017, Fatigue behavior of a Fe-Mn-Si shape memory alloy used for prestressed strengthening, Mater Des, 133, 349, 10.1016/j.matdes.2017.07.055 Fritsch, 2019, Development of nail-anchor strengthening system with iron-based shape memory alloy (Fe-SMA) strips, Constr Build Mater, 229, 10.1016/j.conbuildmat.2019.117042 Izadi, 2019, Iron-based shape memory alloy (Fe-SMA) for fatigue strengthening of cracked steel bridge connections, Constr Build Mater, 227, 10.1016/j.conbuildmat.2019.116800 Wang, 2021, Experimental study on Fe-SMA-to-steel adhesively bonded interfaces using DIC, Eng Fract Mech, 244, 10.1016/j.engfracmech.2021.107553 Lee, 2013, Phase transformation behavior under uniaxial deformation of an Fe–Mn–Si–Cr–Ni–VC shape memory alloy, Mater Sci Eng, A, 581, 1, 10.1016/j.msea.2013.06.002 Lee, 2015, Recovery stress formation in a restrained Fe–Mn–Si-based shape memory alloy used for prestressing or mechanical joining, Constr Build Mater, 95, 600, 10.1016/j.conbuildmat.2015.07.098 Lee, 2013, Stress recovery behaviour of an Fe–Mn–Si–Cr–Ni–VC shape memory alloy used for prestressing, Smart Mater Struct, 22, 10.1088/0964-1726/22/12/125037 Shahverdi, 2018, Iron-based shape memory alloy strips for strengthening RC members: Material behavior and characterization, Constr Build Mater, 173, 586, 10.1016/j.conbuildmat.2018.04.057 E647-00, A., Standard test method for measurement of fatigue crack growth rates. 2011, ASTM International: West Conshohocken, PA. Hosseini, 2019 SikaPower-1277 Product data sheet. 2018, Sika Services AG: Zurich, Switzerland. ABAQUS/Standard User's Manual, Version 6.4. 2012, Pawtucket, Rhode Island, United States: Hibbitt, Karlsson, and Sorensen Inc. Rans, 2013, Analytical prediction of Mode I stress intensity factors for cracked panels containing bonded stiffeners, Eng Fract Mech, 97, 12, 10.1016/j.engfracmech.2012.11.001