Novel Radiation-Adjustable Heating Terminal Based on Flat Heat Pipe Combined with Air Source Heat Pump

Cao, 2016, Building energy-consumption status worldwide and the state-of-the-art technologies for zero-energy buildings during the past decade, Energy Build, 128, 198, 10.1016/j.enbuild.2016.06.089 Building Energy Saving Research Center of Tsinghua University, 2020 Krausmann, 2020, Growing stocks of buildings, infrastructures and machinery as key challenge for compliance with climate targets, Glob Environ Change, 61, 102034, 10.1016/j.gloenvcha.2020.102034 Sovacool, 2021, Decarbonizing household heating: reviewing demographics, geography and low-carbon practices and preferences in five European countries, Renew Sustain Energy Rev, 139, 110703, 10.1016/j.rser.2020.110703 Romanchenko, 2021, Impacts of demand response from buildings and centralized thermal energy storage on district heating systems, Sustain Cities Soc, 64, 102510, 10.1016/j.scs.2020.102510 Bloess, 2018, Power-to-heat for renewable energy integration: a review of technologies, modeling approaches, and flexibility potentials, Appl Energy, 212, 1611, 10.1016/j.apenergy.2017.12.073 Thomaßen, 2021, The decarbonisation of the EU heating sector through electrification: a parametric analysis, Energy Policy, 148(A), 111929, 10.1016/j.enpol.2020.111929 Duan, 2021, Intermittent heating performance of different terminals in hot summer and cold winter zone in China based on field test, J Build Eng, 43, 102546, 10.1016/j.jobe.2021.102546 Guo, 2015, Investigation and analyses of residential heating in the HSCW climate zone of China: status quo and key features, Build Environ, 94, 532, 10.1016/j.buildenv.2015.10.004 Hu, 2019, Performance evaluation of different heating terminals used in air source heat pump system, Int J Refrig, 98, 274, 10.1016/j.ijrefrig.2018.10.014 Hemadri, 2011, Thermal radiators with embedded pulsating heat pipes: infra-red thermography and simulations, Appl Therm Eng, 31, 1332, 10.1016/j.applthermaleng.2011.01.004 Wang, 2017, Experimental study on the thermal performance of an enhanced-convection overhead radiant floor heating system, Energy Build, 135, 233, 10.1016/j.enbuild.2016.11.017 Chae, 2014, Thermal performance evaluation of hybrid heat source radiant system using a concentrate tube heat exchanger, Energy Build, 70, 246, 10.1016/j.enbuild.2013.11.078 Li, 2018, Experimental study of the thermal performance of combined floor and Kang heating terminal based on differentiated thermal demands, Energy Build, 171, 196, 10.1016/j.enbuild.2018.04.060 Li, 2021, Experimental evaluation of indoor thermal environment with modularity radiant heating in low energy buildings, Int J Refrig, 123, 159, 10.1016/j.ijrefrig.2020.11.018 Zhao, 2017, Experimental investigation and feasibility analysis on a capillary radiant heating system based on solar and air source heat pump dual heat source, Appl Energy, 185, 2094, 10.1016/j.apenergy.2016.02.043 Ding, 2020, Study on heating capacity and heat loss of capillary radiant floor heating systems, Appl Therm Eng, 165, 114618, 10.1016/j.applthermaleng.2019.114618 World bank group climate change action plan 2016–2020. Report. Washington, DC: World Bank; 2017. Grafakos, 2020, Integration of mitigation and adaptation in urban climate change action plans in Europe: a systematic assessment, Renew Sustain Energy Rev, 121, 109623, 10.1016/j.rser.2019.109623 Calderón, 2019, An area-based modelling approach for planning heating electrification, Energy Policy, 131, 262, 10.1016/j.enpol.2019.04.023 Carroll, 2020, Air source heat pumps field studies: a systematic literature review, Renew Sustain Energy Rev, 134, 110275, 10.1016/j.rser.2020.110275 Vorushylo, 2018, How heat pumps and thermal energy storage can be used to manage wind power: a study of Ireland, Energy, 157, 539, 10.1016/j.energy.2018.03.001 Xiao, 2020, Comparison and analysis on air-to-air and air-to-water heat pump heating systems, Renew Energy, 146, 1888, 10.1016/j.renene.2019.08.033 Lin, 2016, Evaluation and comparison of thermal comfort of convective and radiant heating terminals in office buildings, Build Environ, 106, 91, 10.1016/j.buildenv.2016.06.015 Yoshino, 2004, Indoor thermal environment of urban residential buildings in China: winter investigation in five major cities, Energy Build, 36, 1227, 10.1016/j.enbuild.2003.09.015 Shao, 2019, Thermal performance analysis of a new refrigerant-heated radiator coupled with air-source heat pump heating system, Appl Energy, 247, 78, 10.1016/j.apenergy.2019.04.032 Dong, 2018, An experimental study on a novel radiant-convective heating system based on air source heat pump, Energy Build, 158, 812, 10.1016/j.enbuild.2017.10.065 Xu, 2018, Investigation of air-source heat pump using heat pipes as heat radiator, Int J Refrig, 90, 91, 10.1016/j.ijrefrig.2018.03.025 Yang, 2019, Heating and energy storage characteristics of multi-split air source heat pump based on energy storage defrosting, Appl Energy, 238, 303, 10.1016/j.apenergy.2019.01.079 Zhang, 2019, Experimental study on a novel thermal storage refrigerant-heated radiator coupled with air source heat pump heating system, Build Environ, 164, 106341, 10.1016/j.buildenv.2019.106341 Wang, 2021, Experimental investigation of a novel thermal storage solar air heater (TSSAH) based on flat micro-heat pipe arrays, Renew Energy, 173, 639, 10.1016/j.renene.2021.04.027 Weng, 2021, Numerical and experimental investigations of the micro-channel flat loop heat pipe (MCFLHP) heat recovery system for data centre cooling and heat recovery, J Build Eng, 35, 102088, 10.1016/j.jobe.2020.102088 Jouhara, 2017, Experimental and theoretical investigation of a flat heat pipe heat exchanger for waste heat recovery in the steel industry, Energy, 141, 1928, 10.1016/j.energy.2017.10.142 Tan, 2016, Heat pipe structure on heat transfer and energy saving performance of the wall implanted with heat pipes during the heating season, Appl Therm Eng, 102, 633, 10.1016/j.applthermaleng.2016.03.085 Xin, 2018, Thermal performance analysis of flat heat pipe with graded mini-grooves wick, Appl Energy, 228, 2129, 10.1016/j.apenergy.2018.07.053 Sun, 2020, Experimental investigation on the thermal performance of a novel radiant heating and cooling terminal integrated with a flat heat pipe, Energy Build, 208, 109646, 10.1016/j.enbuild.2019.109646 Li, 2021, Development and evaluation of a supersized aluminum flat plate heat pipe for natural cooling of high power telecommunication equipment, Appl Therm Eng, 184, 116278, 10.1016/j.applthermaleng.2020.116278 Wu, 2021, Dehumidification-adjustable cooling of radiant cooling terminals based on a flat heat pipe, Build Environ, 194, 107716, 10.1016/j.buildenv.2021.107716 Song, 2021, Performance analyses on a novel heat pump with a hybrid condenser combined with flat plate micro-channel heat pipe plus TEG and FPV evaporator, Energy Convers Manage, 228, 113606, 10.1016/j.enconman.2020.113606 Kline, 1953, Describing uncertainties in single sample experiments, Mech Eng, 75, 3