Non-destructive testing and assessment of a piping system with excessive vibration and recurrence crack issue: An industrial case study

Blevins, 1990 Chen, 1987 Parameshwaran, 2016, Fluid-structure interactions and flow induced vibrations: a review, Procedia Eng., 144, 1286, 10.1016/j.proeng.2016.05.124 Miwa, 2015, Two-phase flow induced vibration in piping systems, Prog. Nucl. Energy, 78, 270, 10.1016/j.pnucene.2014.10.003 Tian, 2016, The vibration analysis model of pipeline under the action of gas pressure pulsation coupling, Eng. Fail. Anal., 66, 328, 10.1016/j.engfailanal.2016.05.017 Zou, 2005, Fluid-induced vibration of composite natural gas pipelines, Int. J. Solids Struct., 42, 1253, 10.1016/j.ijsolstr.2004.07.001 Dai, 2012, Vibration analysis of three-dimensional pipes conveying fluid with consideration of steady combined force by transfer matrix method, Appl. Math. Comput., 219, 2453, 10.1016/j.amc.2012.08.081 Ashrafizadeh, 2013, Failure analysis of a high pressure natural gas pipe under split tee by computer simulations and metallurgical assessment, Eng. Fail. Anal., 32, 188, 10.1016/j.engfailanal.2013.03.013 Sierra-Espinosa, 2013, Vibration failure in admission pipe of a steam turbine due to flow instability, Eng. Fail. Anal., 27, 30, 10.1016/j.engfailanal.2012.08.011 Zhang, 2015, Structural vibration and fluid-borne noise induced by turbulent flow through a 90° piping elbow with/without a guide vane, Int. J. Press. Vessel. Pip., 125, 66, 10.1016/j.ijpvp.2014.09.004 Majid, 2012, Experimental and computational failure analysis of natural gas pipe, Eng. Fail. Anal., 19, 32, 10.1016/j.engfailanal.2011.09.004 Zhu, 2014, Fluid–structure interaction computational analysis of flow field, shear stress distribution and deformation of three-limb pipe, Eng. Fail. Anal., 42, 252, 10.1016/j.engfailanal.2014.04.021 Kong, 2014, Non-destructive testing and assessment of dynamic incompatibility between third-party piping and drain valve systems: an industrial case study, Nondestruct. Test. Eval., 29, 154, 10.1080/10589759.2014.904313 Kong, 2014, Failure analysis of flow-induced vibration problem of in-serviced duplex stainless steel piping system in oil and gas industry, Mater. Res. Innov., 18, 417, 10.1179/1432891714Z.000000000990 Rahman, 2013, A hybrid approach for nondestructive assessment and design optimisation and testing of in-service machinery, Nondestruct. Test. Eval., 28, 44, 10.1080/10589759.2012.694886 Trebuňa, 2013, Identification of pipes damages on gas compressor stations by modal analysis methods, Eng. Fail. Anal., 27, 213, 10.1016/j.engfailanal.2012.08.024 Liang, 2015, Vibration cause analysis and elimination of reciprocating compressor inlet pipelines, Eng. Fail. Anal., 48, 272, 10.1016/j.engfailanal.2014.11.003 Devriendt, 2010, From operating deflection shapes towards mode shapes using transmissibility measurements, Mech. Syst. Signal Process., 24, 665, 10.1016/j.ymssp.2009.10.018 Dossing, 1987, Operational Deflection Shapes: Background, Measurement and Applications, 1372 Marscher, 1999, Use of Operating Deflection and Mode Shapes for Machinery Diagnostics, 2065 PL, 1993, Operating Detection Shapes from Time versus Frequency Domain Measurements, 581 Pascual, 1999, On-Line Damage Assessment Using Operating Detection Shapes, 238 Tongue, 2002 Noroozi, 2016, Condition monitoring and diagnostic of an extruder motor and its gearbox vibration problem (an industrial case study), Insight Non-Destruct. Test. Cond. Monit., 58, 101, 10.1784/insi.2016.58.2.101 Wachel, 1981, 1