Non-destructive assessment of fibre content and orientation in UHPFRC layers based on a magnetic method

Yu, 2014, Mix design and properties assessment of ultra-high performance fibre reinforced concrete (UHPFRC), Cem. Concr. Res., 56, 29, 10.1016/j.cemconres.2013.11.002 Naaman, 2012, The path to ultra-high performance fiber reinforced concrete (UHPFRC), 3 Rossi, 1997, High performance multimodal fiber reinforced cement composites (HPMFRCC): the LCPC experience, ACI Mater. J., 94, 478 Brühwiler, 2013, Rehabilitation and strengthening of concrete structures using ultra-high performance fibre reinforced concrete, Struct. Eng. Int., 23, 450, 10.2749/101686613X13627347100437 Kwon, 2014, Development of ultra-high-performance hybrid fiber- reinforced cement-based composites, ACI Mater. J., 111, 309 Wille, 2014, Properties of strain hardening ultra high performance fiber reinforced concrete (UHP-FRC) under direct tensile loading, Cem. Concr. Compos, 48, 53, 10.1016/j.cemconcomp.2013.12.015 Park, 2012, Tensile behavior of ultra high performance hybrid fiber reinforced concrete, Cem. Concr. Compos, 34, 172, 10.1016/j.cemconcomp.2011.09.009 Charron, 2008, Transport properties of water and glycol in an ultra high performance fiber reinforced concrete (UHPFRC) under high tensile deformation, Cem. Concr. Res., 38, 689, 10.1016/j.cemconres.2007.12.006 Charron, 2007, Permeability of ultra high performance fiber reinforced concretes (UHPFRC) under high stresses, Mater. Struct., 40, 269, 10.1617/s11527-006-9105-0 Toledo Filho, 2012, Performance assessment of ultra high performance fiber reinforced cementitious composites in view of sustainability, Mater. Des., 36, 880, 10.1016/j.matdes.2011.09.022 Wang, 2014, Durability of an ultra high performance fiber reinforced concrete (UHPFRC) under progressive aging, Cem. Concr. Res., 55, 1, 10.1016/j.cemconres.2013.09.008 Massicotte, 2013, Performance of UHPFRC jackets for the seismic strenghtening of bridge piers, 89 Hussein, 2012, Strength and ductility of RC beams strengthened with steel-reinforced strain hardening cementitious composites, Cem. Concr. Compos, 34, 1061, 10.1016/j.cemconcomp.2012.06.004 Karihaloo, 2003, Retrofitting of RC beams with CARDIFRC, J. Compos Constr., 7, 174, 10.1061/(ASCE)1090-0268(2003)7:3(174) Resprendino, 2012, State of the art of desing and construction of UHPFRC structures in France, 27 Toutlemonde, 2011, Field experience of UHPFRC durability in an air cooling tower, 814 Wille, 2013, Pullout behavior of high-strength steel fibers embedded in ultra-high-performance concrete, ACI Mater. J., 479 Wille, 2013, Effect of ultra-high-performance concrete on pullout behavior of high-strength brass-coated straight steel fibers, ACI Mater. J., 110, 451 Oesterlee, 2010 Ferrara, 2011, High mechanical performance of fibre reinforced cementitious composites: the role of ‘casting-flow induced’ fibre orientation, Mater. Struct., 44, 109, 10.1617/s11527-010-9613-9 Stähli, 2007, Manufacturing, fibre anisotropy and fracture of hybrid fibre concrete, Eng. Fract. Mech., 74, 223, 10.1016/j.engfracmech.2006.01.028 Martinie, 2011, Simple tools for fiber orientation prediction in industrial practice, Cem. Concr. Res., 41, 993, 10.1016/j.cemconres.2011.05.008 Dupont, 2005, Distribution of steel fibres in rectangular sections, Cem. Concr. Compos, 27, 391, 10.1016/j.cemconcomp.2004.03.005 AFGC, 2002 Simon, 2013, Feedback of a ten years assessment distribution using K factor concept, 669 Yoo, 2015, Structural performance of ultra-high-performance concrete beams with different steel fibers, Eng. Struct., 102, 409, 10.1016/j.engstruct.2015.08.029 Faifer, 2013, Low frequency electrical and magnetic methods for non-destructive analysis of fiber dispersion in fiber reinforced cementitious composites: an overview, Sensors Switz., 13, 1300, 10.3390/s130101300 Torrents, 2012, Inductive method for assessing the amount and orientation of steel fibers in concrete, Mater. Struct., 45, 1577, 10.1617/s11527-012-9858-6 Cavalaro, 2014, Improved assessment of fibre content and orientation with inductive method in SFRC, Mater. Struct., 48, 1859, 10.1617/s11527-014-0279-6 Cavalaro, 2015, Assessment of fibre content and 3D profile in cylindrical SFRC specimens, Mater. Struct. Faifer, 2011, Nondestructive testing of steel-fiber-reinforced concrete using a magnetic approach, IEEE Trans. Instrum. Meas., 60, 1709, 10.1109/TIM.2010.2090059 Faifer, 2010, A compensated magnetic probe for steel fiber reinforced concrete monitoring, 698 Ferrara, 2012, A magnetic method for non destructive monitoring of fiber dispersion and orientation in steel fiber reinforced cementitious composites. Part 2: correlation to tensile fracture toughness, Mater. Struct., 45, 591, 10.1617/s11527-011-9794-x Ferrara, 2012, A magnetic method for non destructive monitoring of fiber dispersion and orientation in steel fiber reinforced cementitious composites—part 1: method calibration, Mater. Struct., 45, 575, 10.1617/s11527-011-9793-y Wentworth, 2005 Nunes S, Pimentel M, Ribeiro F, Milheiro-Oliveira P, Carvalho A. Estimation of the tensile strength of UHPFRC layers based on non-destructive assessment of the fibre content and orientation (submitted to Cement & Concrete Composites) n.d. Pimentel, 2016, On the double-edge wedge-splitting test for the characterisation of HPFRC in uniaxial tension, 8 Okamura, 2000, Self-compacting concrete, Struct. Concr., I, 3, 10.1680/stco.2000.1.1.3 Prisco, 2013, Double edge wedge splitting ( DEWS ): an indirect tension test to identify post-cracking behaviour of fibre reinforced cementitious composites, Mater. Struct., 1893, 10.1617/s11527-013-0028-2