Nitrate additives for lithium batteries: Mechanisms, applications, and prospects

Liu, 2019, Pathways for practical high-energy long-cycling lithium metal batteries, Nat. Energy, 4, 180, 10.1038/s41560-019-0338-x Lin, 2017, Reviving the lithium metal anode for high-energy batteries, Nat. Nanotechnol., 12, 194, 10.1038/nnano.2017.16 Ye, 2019, Lithium nitrate: a double-edged sword in the rechargeable lithium-sulfur cell, Energy Storage Mater., 16, 498, 10.1016/j.ensm.2018.09.022 Baek, 2020, New high donor electrolyte for lithium-sulfur batteries, Adv. Mater., 32, 2005022, 10.1002/adma.202005022 Zhang, 2018, Highly stable lithium metal batteries enabled by regulating the solvation of lithium ions in nonaqueous electrolytes, Angew. Chem. Int. Ed., 57, 5301, 10.1002/anie.201801513 Zhang, 2020, Colossal granular lithium deposits enabled by the grain-coarsening effect for high-efficiency lithium metal full batteries, Adv. Mater., 32, 2001740, 10.1002/adma.202001740 Liu, 2021, An inorganic-rich solid electrolyte interphase for advanced lithium-metal batteries in carbonate electrolytes, Angew. Chem. Int. Ed., 60, 3661, 10.1002/anie.202012005 Zhao, 2021, Cu(NO3)2 as efficient electrolyte additive for 4 V class Li metal batteries with ultrahigh stability, Energy Storage Mater., 37, 1, 10.1016/j.ensm.2021.01.030 Li, 2018, An ultrafast rechargeable lithium metal battery, J. Mater. Chem. A, 6, 15517, 10.1039/C8TA05354E Manthiram, 2013, Challenges and prospects of lithium-sulfur batteries, Acc. Chem. Res., 46, 1125, 10.1021/ar300179v Chen, 2020, Electrolyte regulation towards stable lithium-metal anodes in lithium–sulfur batteries with sulfurized polyacrylonitrile cathodes, Angew. Chem. Int. Ed., 59, 10732, 10.1002/anie.201912701 Mikhaylik, 2008, U.S. Pat, 7, 680 Aurbach, 2009, On the surface chemical aspects of very high energy density, rechargeable Li–sulfur batteries, J. Electrochem. Soc., 156, A694, 10.1149/1.3148721 Xiong, 2012, Properties of surface film on lithium anode with LiNO3 as lithium salt in electrolyte solution for lithium-sulfur batteries, Electrochim. Acta, 83, 78, 10.1016/j.electacta.2012.07.118 Ebadi, 2017, Density functional theory modeling the interfacial chemistry of the LiNO3 additive for lithium-sulfur batteries by means of simulated photoelectron spectroscopy, J. Phys. Chem. C, 121, 23324, 10.1021/acs.jpcc.7b07847 Ma, 2014, A lithium anode protection guided highly-stable lithium-sulfur battery, Chem. Commun., 50, 14209, 10.1039/C4CC05535G May, 2021, Rapid interfacial exchange of Li ions dictates high coulombic efficiency in Li metal anodes, ACS Energy Lett., 6, 1162, 10.1021/acsenergylett.1c00112 Boukamp, 1978, Fast ionic conductivity in lithium nitride, Mater. Res. Bull., 13, 23, 10.1016/0025-5408(78)90023-5 Wang, 1995, Ionic conductivities and structure of lithium phosphorus oxynitride glasses, J. Non-Cryst. Solids, 183, 297, 10.1016/0022-3093(94)00665-2 Jozwiuk, 2016, The critical role of lithium nitrate in the gas evolution of lithium-sulfur batteries, Energy Environ. Sci., 9, 2603, 10.1039/C6EE00789A Liu, 2018, Solubility-mediated sustained release enabling nitrate additive in carbonate electrolytes for stable lithium metal anode, Nat. Commun., 9, 3656, 10.1038/s41467-018-06077-5 Zhang, 2020, Engineering wavy-nanostructured anode interphases with fast ion transfer kinetics: toward practical Li-metal full batteries, Adv. Funct. Mater., 30, 2003800, 10.1002/adfm.202003800 Zhang, 2012, Role of LiNO3 in rechargeable lithium/sulfur battery, Electrochim. Acta, 70, 344, 10.1016/j.electacta.2012.03.081 Zhang, 2012, Effect of discharge cutoff voltage on reversibility of lithium/sulfur batteries with LiNO3-contained electrolyte, J. Electrochem. Soc., 159, A920, 10.1149/2.002207jes Rosenman, 2015, The effect of interactions and reduction products of LiNO3, the anti-shuttle agent, in Li–S battery systems, J. Electrochem. Soc., 162, A470, 10.1149/2.0861503jes Qiu, 2019, A concentrated ternary-salts electrolyte for high reversible Li metal battery with slight excess Li, Adv. Energy Mater., 9, 1803372, 10.1002/aenm.201803372 Tan, 2019, Nitriding-interface-regulated lithium plating enables flame-retardant electrolytes for high-voltage lithium metal batteries, Angew. Chem. Int. Ed., 58, 7802, 10.1002/anie.201903466 Lang, 2020, Tunable structure and dynamics of solid electrolyte interphase at lithium metal anode, Nano Energy, 75, 104967, 10.1016/j.nanoen.2020.104967 Duangdangchote, 2019, Insight into the effect of additives widely used in lithium-sulfur batteries, Chem. Commun., 55, 13951, 10.1039/C9CC06504K Duangdangchote, 2020, The protection of lithium metal enabled by LiNO3 for lithium-sulfur batteries, ECS Trans., 97, 827, 10.1149/09707.0827ecst Ding, 2016, Building better lithium-sulfur batteries: from LiNO3 to solid oxide catalyst, Sci. Rep., 6, 33154, 10.1038/srep33154 Xu, 2015, Demonstration of highly efficient lithium-sulfur batteries, J. Mater. Chem. A, 3, 4170, 10.1039/C4TA06641C Zhang, 2012, A new direction for the performance improvement of rechargeable lithium/sulfur batteries, J. Power Sources, 200, 77, 10.1016/j.jpowsour.2011.10.076 Zhang, 2013, New insight into liquid electrolyte of rechargeable lithium/sulfur battery, Electrochim. Acta, 97, 226, 10.1016/j.electacta.2013.02.122 Liang, 2011, Improved cycling performances of lithium sulfur batteries with LiNO3-modified electrolyte, J. Power Sources, 196, 9839, 10.1016/j.jpowsour.2011.08.027 Yu, 2019, An investigation on the relationship between the stability of lithium anode and lithium nitrate in electrolyte, J. Electrochem. Soc., 166, A3570, 10.1149/2.0151915jes Shim, 2019, Study for an effect of LiNO3 on polysulfide multistep reaction in Li/S battery, J. Ind. Eng. Chem., 80, 283, 10.1016/j.jiec.2019.08.006 Xiong, 2013, On the role of polysulfides for a stable solid electrolyte interphase on the lithium anode cycled in lithium-sulfur batteries, J. Power Sources, 236, 181, 10.1016/j.jpowsour.2013.02.072 Xiong, 2014, Characterization of the solid electrolyte interphase on lithium anode for preventing the shuttle mechanism in lithium-sulfur batteries, J. Power Sources, 246, 840, 10.1016/j.jpowsour.2013.08.041 Zhang, 2018, The synergetic interaction between LiNO3 and lithium polysulfides for suppressing shuttle effect of lithium-sulfur batteries, Energy Storage Mater., 11, 24, 10.1016/j.ensm.2017.09.001 Li, 2015, The synergetic effect of lithium polysulfide and lithium nitrate to prevent lithium dendrite growth, Nat. Commun., 6, 7436, 10.1038/ncomms8436 Zhao, 2016, Li2S5-based ternary-salt electrolyte for robust lithium metal anode, Energy Storage Mater., 3, 77, 10.1016/j.ensm.2016.01.007 Zhao, 2015, Rechargeable lithium-iodine batteries with iodine/nanoporous carbon cathode, Nano Lett., 15, 5982, 10.1021/acs.nanolett.5b02116 Giordani, 2013, Synergistic effect of oxygen and LiNO3 on the interfacial stability of lithium metal in a Li/O2 battery, J. Electrochem. Soc., 160, A1544, 10.1149/2.097309jes Zhang, 2016, A new finding on the role of LiNO3 in lithium-sulfur battery, J. Power Sources, 322, 99, 10.1016/j.jpowsour.2016.05.009 Tang, 2019, High-performance quasi-solid-state MXene-based Li-I batteries, ACS Cent. Sci., 5, 365, 10.1021/acscentsci.8b00921 Uddin, 2013, Lithium nitrate as regenerable SEI stabilizing agent for rechargeable Li/O2 batteries, J. Phys. Chem. Lett., 4, 3760, 10.1021/jz402025n Ming, 2018, New insights on graphite anode stability in rechargeable batteries: Li ion coordination structures prevail over solid electrolyte interphases, ACS Energy Lett., 3, 335, 10.1021/acsenergylett.7b01177 Wahyudi, 2021, Lithium-ion desolvation induced by nitrate additives reveals new insights into high performance lithium batteries, Adv. Funct. Mater., 31, 2101593, 10.1002/adfm.202101593 Fu, 2020, Lithium nitrate regulated sulfone electrolytes for lithium metal batteries, Angew. Chem. Int. Ed., 59, 22194, 10.1002/anie.202009575 Li, 2019, RbF as a dendrite-inhibiting additive in lithium metal batteries, ACS Appl. Mater. Interfaces, 11, 20804, 10.1021/acsami.9b03940 Ding, 2013, Dendrite-free lithium deposition via self-healing electrostatic shield mechanism, J. Am. Chem. Soc., 135, 4450, 10.1021/ja312241y Zhang, 2014, Dendrite-free lithium deposition with self-aligned nanorod structure, Nano Lett., 14, 6889, 10.1021/nl5039117 Gu, 2021, Nitrate additives coordinated with crown ether stabilize lithium metal anodes in carbonate electrolyte, Adv. Funct. Mater., 31, 2102128, 10.1002/adfm.202102128 Jia, 2016, Extremely accessible potassium nitrate (KNO3) as the highly efficient electrolyte additive in lithium battery, ACS Appl. Mater. Interfaces, 8, 15399, 10.1021/acsami.6b03897 Xu, 2016, Enhanced cycleability and dendrite-free lithium deposition by adding potassium ion to the electrolyte for lithium metal batteries, Electrochim. Acta, 212, 758, 10.1016/j.electacta.2016.07.080 Wood, 2016, K+ reduces lithium dendrite growth by forming a thin, less-resistive solid electrolyte interphase, ACS Energy Lett., 1, 414, 10.1021/acsenergylett.6b00259 Shuai, 2019, Highly stable lithium plating by a multifunctional electrolyte additive in a lithium-sulfurized polyacrylonitrile battery, Chem. Commun., 55, 2376, 10.1039/C8CC09372E Sahalie, 2019, Effect of bifunctional additive potassium nitrate on performance of anode free lithium metal battery in carbonate electrolyte, J. Power Sources, 437, 226912, 10.1016/j.jpowsour.2019.226912 Pham, 2017, Solvation and dynamics of sodium and potassium in ethylene carbonate from ab initio molecular dynamics simulations, J. Phys. Chem. C, 121, 21913, 10.1021/acs.jpcc.7b06457 Okoshi, 2013, Theoretical analysis on de-solvation of lithium, sodium, and magnesium cations to organic electrolyte solvents, J. Electrochem. Soc., 160, A2160, 10.1149/2.074311jes Zhao, 2021, Tuning solvation behavior of ester-based electrolytes toward highly stable lithium-metal batteries, ACS Appl. Mater. Interfaces, 13, 40582, 10.1021/acsami.1c10279 Yan, 2018, Lithium nitrate solvation chemistry in carbonate electrolyte sustains high-voltage lithium metal batteries, Angew. Chem. Int. Ed., 57, 14055, 10.1002/anie.201807034 Lee, 2020, Toward the sustainable lithium metal batteries with a new electrolyte solvation chemistry, Adv. Energy Mater., 10, 2000567, 10.1002/aenm.202000567 Goodman, 2014, Effect of alkali and alkaline earth metal salts on suppression of lithium dendrites, J. Electrochem. Soc., 161, D418, 10.1149/2.0301409jes Zu, 2014, Stabilized lithium–metal surface in a polysulfide-rich environment of lithium–sulfur batteries, J. Phys. Chem. Lett., 5, 2522, 10.1021/jz501352e Yoon, 2008, Enhanced cyclability and surface characteristics of lithium batteries by Li–Mg co-deposition and addition of HF acid in electrolyte, Electrochim. Acta, 53, 2501, 10.1016/j.electacta.2007.10.019 Wu, 2020, Suppressing lithium dendrite growth by a synergetic effect of uniform nucleation and inhibition, J. Mater. Chem., 8, 4300, 10.1039/C9TA13644D Liu, 2021, Ultralight electrolyte for high-energy lithium-sulfur pouch cells, Angew. Chem. Int. Ed., 60, 17547, 10.1002/anie.202103303 Walker, 2013, A rechargeable Li-O2 battery using a lithium nitrate/N,N-dimethylacetamide electrolyte, J. Am. Chem. Soc., 135, 2076, 10.1021/ja311518s Hayashi, 2020, Enhancement of bifunctional effect for LiNO3/glyme electrolyte by using dual solvent system for Li-O2 batteries, J. Electrochem. Soc., 167, 10.1149/1945-7111/ab6975 Burke, 2015, Enhancing electrochemical intermediate solvation through electrolyte anion selection to increase nonaqueous Li-O2 battery capacity, Proc. Natl. Acad. Sci. U.S.A., 112, 9293, 10.1073/pnas.1505728112 Giordani, 2019, Rechargeable-battery chemistry based on lithium oxide growth through nitrate anion redox, Nat. Chem., 11, 1133, 10.1038/s41557-019-0342-6 Carbone, 2017, Relevant features of a triethylene glycol dimethyl ether-based electrolyte for application in lithium battery, ACS Appl. Mater. Interfaces, 9, 17086, 10.1021/acsami.7b03235 Jin, 2020, The synergistic effect of lithium bis(fluorosulfonyl)imide and lithium nitrate for high-performance lithium metal anode, J. Electroanal. Chem., 874, 114484, 10.1016/j.jelechem.2020.114484 Wei, 2020, Towards a high-performance lithium-metal battery with glyme solution and an olivine cathode, Chemelectrochem, 7, 2376, 10.1002/celc.202000272 Zhao, 2020, Designing electrolytes with polymerlike glass-forming properties and fast ion transport at low temperatures, Proc. Natl. Acad. Sci. U.S.A., 117, 26053, 10.1073/pnas.2004576117 Zheng, 2021, Stable lithium-carbon composite enabled by dual-salt additives, Nano-Micro Lett., 13, 111, 10.1007/s40820-021-00633-3 Zheng, 2021, Cocktail therapy towards high temperature/high voltage lithium metal battery via solvation sheath structure tuning, Energy Storage Mater., 38, 599, 10.1016/j.ensm.2021.04.002 Rodriguez, 2020, Separator-free and concentrated LiNO3 electrolyte cells enable uniform lithium electrodeposition, J. Mater. Chem., 8, 3999, 10.1039/C9TA10929C Kang, 2021, Stable cycling and uniform lithium deposition in anode-free lithium-metal batteries enabled by a high-concentration dual-salt electrolyte with high LiNO3 content, J. Power Sources, 490, 229504, 10.1016/j.jpowsour.2021.229504 Etacheri, 2012, Exceptional electrochemical performance of Si-nanowires in 1,3-dioxolane solutions: a surface chemical investigation, Langmuir, 28, 6175, 10.1021/la300306v Dong, 2020, In situ surface protection of lithium metal anode in Lithium–Selenium disulfide batteries with ionic liquid-based electrolytes, Nano Energy, 69, 104434, 10.1016/j.nanoen.2019.104434 Lian, 2021, Isomeric organodithiol additives for improving interfacial chemistry in rechargeable Li–S batteries, J. Am. Chem. Soc., 143, 11063, 10.1021/jacs.1c04222 Wang, 2021, Electrosynthesis of 1,4-bis(diphenylphosphanyl) tetrasulfide via sulfur radical addition as cathode material for rechargeable lithium battery, Nat. Commun., 12, 3220, 10.1038/s41467-021-23521-1 Wang, 2021, Anion intercalation of VS4 triggers atomic sulfur transfer to organic disulfide in rechargeable lithium battery, Adv. Funct. Mater., 31, 2009875, 10.1002/adfm.202009875 Liu, 2021, Understanding sulfur redox mechanisms in different electrolytes for room-temperature Na–S batteries, Nano-Micro Lett., 13, 121, 10.1007/s40820-021-00648-w Lin, 2018, Influence of CsNO3 as electrolyte additive on electrochemical property of lithium anode in rechargeable battery, J. Cent. South Univ., 25, 719, 10.1007/s11771-018-3776-x Wang, 2018, Facile stabilization of the sodium metal anode with additives: unexpected key role of sodium polysulfide and adverse effect of sodium nitrate, Angew. Chem. Int. Ed., 57, 7734, 10.1002/anie.201801818 Gu, 2019, Toward high-performance Li metal anode via difunctional protecting layer, Front. Chem., 7, 572, 10.3389/fchem.2019.00572 Liu, 2016, Lanthanum nitrate as electrolyte additive to stabilize the surface morphology of lithium anode for lithium-sulfur battery, ACS Appl. Mater. Interfaces, 8, 7783, 10.1021/acsami.5b12231 Li, 2019, ZrO(NO3)2 as a functional additive to suppress the diffusion of polysulfides in lithium - sulfur batteries, J. Power Sources, 442, 227232, 10.1016/j.jpowsour.2019.227232 Linert, 1993, Donor numbers of anions in solution: the use of solvatochromic Lewis acid–base indicators, J. Chem. Soc., Dalton Trans., 3181, 10.1039/DT9930003181 Guo, 2015, Vinylene carbonate–LiNO3: a hybrid additive in carbonic ester electrolytes for SEI modification on Li metal anode, Electrochem. Commun., 51, 59, 10.1016/j.elecom.2014.12.008 Zhang, 2019, formation and evolution of lithium metal anodecarbonate electrolyte interphases, ACS Materials Lett., 1, 254, 10.1021/acsmaterialslett.9b00167 Brown, 2019, Using triethyl phosphate to increase the solubility of LiNO3 in carbonate electrolytes for improving the performance of the lithium metal anode, J. Electrochem. Soc., 166, A2523, 10.1149/2.0991912jes Xiao, 2020, Regulating the Li+-Solvation structure of ester electrolyte for high-energy-density lithium metal batteries, Small, 16, 2004688, 10.1002/smll.202004688 Zhang, 2021, Competitive solvation enhanced stability of lithium metal anode in dual-salt electrolyte, Nano Lett., 21, 3310, 10.1021/acs.nanolett.1c00848 Jie, 2020, Enabling high-voltage lithium metal batteries by manipulating solvation structure in ester electrolyte, Angew. Chem. Int. Ed., 59, 3505, 10.1002/anie.201914250 Ramasubramanian, 2019, Lithium diffusion mechanism through solid-electrolyte interphase in rechargeable lithium batteries, J. Phys. Chem. C, 123, 10237, 10.1021/acs.jpcc.9b00436 Piao, 2021, Lithium metal batteries enabled by synergetic additives in commercial carbonate electrolytes, ACS Energy Lett., 6, 1839, 10.1021/acsenergylett.1c00365 Li, 2020, Synergistic dual-additive electrolyte enables practical lithium-metal batteries, Angew. Chem. Int. Ed., 59, 14935, 10.1002/anie.202004853 Yang, 2021, Dissolution–precipitation dynamics in ester electrolyte for high-stability lithium metal batteries, ACS Energy Lett., 6, 1413, 10.1021/acsenergylett.1c00149 Guan, 2018, Protecting lithium anode with LiNO3/Al2O3/PVDF-coated separator for lithium-sulfur batteries, J. Alloys Compd., 765, 544, 10.1016/j.jallcom.2018.06.235 Liu, 2020, A biscuit-like separator enabling high performance lithium batteries by continuous and protected releasing of NO3− in carbonate electrolyte, Energy Storage Mater., 24, 229, 10.1016/j.ensm.2019.08.016 Shi, 2018, High-capacity rechargeable batteries based on deeply cyclable lithium metal anodes, Proc. Natl. Acad. Sci. U.S.A., 115, 5676, 10.1073/pnas.1803634115 Zhang, 2020, A sustainable solid electrolyte interphase for high-energy-density lithium metal batteries under practical conditions, Angew. Chem. Int. Ed., 59, 3252, 10.1002/anie.201911724 Liu, 2020, Sustained-release nanocapsules enable long-lasting stabilization of Li anode for practical Li-metal batteries, Nano-Micro Lett., 12, 176, 10.1007/s40820-020-00514-1 Jin, 2021, Robust cycling of ultrathin Li metal enabled by nitrate-preplanted Li powder composite, Adv. Energy Mater., 11, 2003769, 10.1002/aenm.202003769 Fu, 2021, A salt-in-metal anode: stabilizing the solid electrolyte interphase to enable prolonged battery cycling, Adv. Funct. Mater., 31, 2010602, 10.1002/adfm.202010602 Wang, 2021, Addressing the low solubility of a solid electrolyte interphase stabilizer in an electrolyte by composite battery anode design, ACS Appl. Mater. Interfaces, 13, 13354, 10.1021/acsami.1c01571 Nagata, 2018, Amorphization of sodium cobalt oxide active materials for high-capacity all-solid-state sodium batteries, Chem. Mater., 30, 6998, 10.1021/acs.chemmater.8b01872 Wang, 2020, In-plane lithium growth enabled by artificial nitrate-rich layer: fast deposition kinetics and desolvation/adsorption mechanism, Small, 16, 2000769, 10.1002/smll.202000769 Qi, 2019, Improving the electrochemical cycling performance of anode materials via facile in situ surface deposition of a solid electrolyte layer, J. Power Sources, 424, 150, 10.1016/j.jpowsour.2019.03.077 Togasaki, 2016, Enhanced cycling performance of a Li metal anode in a dimethylsulfoxide-based electrolyte using highly concentrated lithium salt for a lithium-oxygen battery, J. Power Sources, 307, 98, 10.1016/j.jpowsour.2015.12.123 Togasaki, 2017, A comparative study of LiNO3 and LiTFSI for the cycling performance of sigma-MnO2 cathode in lithium- oxygen batteries, J. Electrochem. Soc., 164, A2225, 10.1149/2.0051712jes Wang, 2016, To mitigate self-discharge of lithium-sulfur batteries by optimizing ionic liquid electrolytes, Energy Environ. Sci., 9, 224, 10.1039/C5EE02837J Wang, 2020, Polymer matrix mediated solvation of LiNO3 in carbonate electrolytes for quasi-solid high-voltage lithium metal batteries, Nano Res., 13, 2431, 10.1007/s12274-020-2871-0 Li, 2022, LiF and LiNO3 as synergistic additives for PEO-PVDF/LLZTO-based composite electrolyte towards high-voltage lithium batteries with dual-interfaces stability, J. Energy Chem., 65, 319, 10.1016/j.jechem.2021.05.055 Zhang, 2021, Stable all-solid-state lithium metal batteries with Li3N-LiF-enriched interface induced by lithium nitrate addition, Energy Storage Mater., 43, 229, 10.1016/j.ensm.2021.09.002 Zhao, 2019, Solid-state polymer electrolytes stabilized by task-specific salt additives, J. Mater. Chem. A, 7, 7823, 10.1039/C8TA12008K Zheng, 2011, Hollow carbon nanofiber-encapsulated sulfur cathodes for high specific capacity rechargeable lithium batteries, Nano Lett., 11, 4462, 10.1021/nl2027684 Zhang, 2012, Improved cyclability of liquid electrolyte lithium/sulfur batteries by optimizing electrolyte/sulfur ratio, Energies, 5, 5190, 10.3390/en5125190 Yang, 2013, A membrane-free lithium/polysulfide semi-liquid battery for large-scale energy storage, Energy Environ. Sci., 6, 1552, 10.1039/c3ee00072a Adams, 2017, Long term stability of Li–S batteries using high concentration lithium nitrate electrolytes, Nano Energy, 40, 607, 10.1016/j.nanoen.2017.09.015 Carbone, 2018, A simple approach for making a viable, safe, and high-performances lithium-sulfur battery, J. Power Sources, 377, 26, 10.1016/j.jpowsour.2017.11.079 Shuai, 2019, Highly stable performance of lithium-sulfurized polyacrylonitrile batteries using a lean ether-based electrolyte, Chem. Commun., 55, 11271, 10.1039/C9CC05539H