Near wellbore thermal effects in a tight gas reservoir: Impact of different reservoir and fluid parameters

Abdulagatov, 2015, Thermal-diffusivity and heat-capacity measurements of sandstone at high temperatures using laser flash and DSC methods, Int. J. Thermophys., 36, 658, 10.1007/s10765-014-1829-4 Adivarahan, P., Kunii, D., & Smith, J. M. (1962). Heat Transfer in Porous Rocks Through Which Single-Phase Fluids Are Flowing SPE: 10.2118/368-PA. In: Presented at 37th Annual Fall Meeting of SPE, Los Angeles, California; 7–10 October, 1962. App, 2013, Influence of hydraulic fractures on wellbore/sandface temperatures during production, Soc. Pet. Eng. App, 2010, Nonisothermal and productivity behavior of high-pressure reservoirs, Soc. Pet. Eng. App, 2009, Field cases: nonisothermal behavior due to Joule-Thomson and transient fluid expansion/compression effects, Soc. Pet. Eng. App, 2013, Impact of reservoir permeability on flowing sandface temperatures: dimensionless analysis, Soc. Pet. Eng. Atkinson, P. G., Ramey, H. J. (1977) Problems of Heat Transfer in Porous Media SPE: 10.2118/6792. In: Presented at SPE Annual Fall Technical Conference and Exhibition, Denver, Colorado; 9–12 October, 1977. Baker, 1990, Modelling the performance of high-pressure high-temperature wells, Soc. Pet. Eng. Blackwell, 1989, Thermal conductivity of sedimentary rocks: measurement and significance, 5 Brown, 2007, Monitoring production from gravel-packed sand-screen completions on BP’s azeri field wells using permanently installed distributed temperature sensors, Soc. Pet. Eng. Charles, 2012, Temperature prediction model for flowing distribution in wellbores and pipelines, Soc. Pet. Eng. 1966 Clauser, 1995, Thermal conductivity of rocks and minerals, 105 Eppelbaum, 2014 Gamal, 1997, Vol. 85 Johnson, 2006, Successful flow profiling of gas wells using distributed temperature sensing data, Soc. Pet. Eng. Kabir, 2014, Interpreting distributed-temperature measurements in deepwater gas-well testing: estimation of static and dynamic thermal gradients, and flow rates, Soc. Pet. Eng. Kutasov, 1999 Li, 2016, Breakdown pressure and fracture surface morphology of hydraulic fracturing in shale with H2O, CO2 and N2, Geomech. Geophys. Geo-Energy Geo-Res., 2, 63, 10.1007/s40948-016-0022-6 Maubeuge, F., Didek, M. P., Beardsell, M. B., & Caltagirone, J. P. (1994) Temperature Model for Flow in Porous Media and Wellbore SPE: SPWLA-1994-N. In: Presented at 35th Annual Logging Symposium, Tulsa, Oklahoma; 19–22 June, 1994. Poelchau, 1997, Basin simulation and the design of the conceptual basin model, 36 Ribeiro, 2013, Pressure and temperature transient analysis: hydraulic fractured well application, Soc. Pet. Eng. Wanniarachchi, 2015, “Current opinions on foam-based hydro-fracturing in deep geological reservoirs”, Geomech. Geophys. Geo-Energy Geo-Res., 1, 121, 10.1007/s40948-015-0015-x Yoshioka, 2007, A new inversion method to interpret flow profiles from distributed temperature and pressure measurements in horizontal wells, Soc. Pet. Eng.