Near-surface phenomena occurring in cemented carbides with different binders during rotary-percussive drilling of reinforced concrete: FE simulation and microstructural investigations

Moseley, 2016, The influence of loading spectrum, workpiece material, hardmetal grade and drillbit design on the wear and fracture mechanisms of drill bits during rotary-percussive drilling of reinforced concrete: experimental studies and FEM Momeni, 2017, The Wear of WC-Co drill bits during the drilling of reinforced concrete, Int. J. Refract. Met. Hard Mater., 62B, 202, 10.1016/j.ijrmhm.2016.08.006 Moseley, 2018, Thermo-mechanical and tribological behaviour of WC-Co and WC-CoNi cemented carbides during rotary-percussive drilling of reinforced concrete Moseley, 2018, Surface microstructural modification of WC-Co and WC-CoNi cemented carbides during rotary-percussive drilling of reinforced concrete Östberg, 2006, Mechanisms of plastic deformation of WC–Co and Ti(C, N)–WC–Co, Int. J. Refract. Met. H. Mater., 24, 145, 10.1016/j.ijrmhm.2005.04.010 Yousfi, 2015, Deformation mechanisms in a WC–Co based cemented carbide during creep, Int. J. Refract. Met. H. Mater., 49, 81, 10.1016/j.ijrmhm.2014.07.016 Toller, 2017, Life time of cemented carbide inserts with Ni-Fe binder in steel turning, Wear, 15, 1822, 10.1016/j.wear.2017.02.018 Toller, 2017, Mechanisms of plastic deformation in WC-Co and WC-Ni-Fe turning inserts Toller-Nordstrom, 2018, Transformation induced martensite in cemented carbide Toller-Nordström, 2018, Alternative binder cemented carbides in steel turning Toller-Nordstrom, 2019, Early microstructural changes in hardmetals deformed by steel turning Jones, 2017, Examination of wear damage to rock-mining hardmetal drill bits, IJRMHM, 66, 1 Surreddi, 2018, Characterization of surface degradation and wear damage of cemented carbide in rock drilling Jacobson, 2018, Tribo-chemical wear testing of rock drill inserts Sandoval, 2019, Deformation of WC-based cemented carbides with partial and total substitution of Co as a binder by means of uniaxial compression of micropillars Heinrichs, 2019, Influence of cemented carbide binder type on wear initiation in rock drilling investigated in sliding wear against magnetite rock Heinrichs, 2018, On the deformation mechanisms of cemented carbide in rock drilling – fundamental studies involving sliding contact against a rock crystal tip, IJRMHM, 77, 141