Natural-based plasticizers and biopolymer films: A review
Tóm tắt
Từ khóa
Tài liệu tham khảo
Sejidov, 2005, Esterification reaction using solid heterogeneous acid catalysts under solvent-less condition, J Mol Catal A: Chem, 240, 186
Rosen, 1993
Białecka-Florjańczyk, 2007, Solubility of plasticizers, polymers and environmental pollution, 397
Rahman, 2004, The plasticizer market: an assessment of traditional plasticizers and research trends to meet new challenges, Prog Polym Sci, 29, 1223, 10.1016/j.progpolymsci.2004.10.001
Sunny, 2004, Use of polymeric plasticizers in polyvinyl chloride to reduce conventional plasticizer migration for critical applications, J Elastomers Plast, 36, 19, 10.1177/0095244304038016
Pielichowski, 2006, Influence of polyesterurethane plasticizer on the kinetics of poly(vinyl chloride) decomposition process, J Therm Anal Calorim, 83, 207, 10.1007/s10973-005-7007-y
Fenollar, 2009, The effect of the curing time and temperature on final properties of flexible PVC with an epoxidized fatty acid ester as natural-based plasticizer, J Mater Sci, 44, 3702, 10.1007/s10853-009-3495-7
Craver, 2000
Pedersen, 2008, Migration of epoxidized soybean oil (ESBO) and phthalates from twist closures into food and enforcement of the overall migration limit, Food Addit Contam A, 25, 503, 10.1080/02652030701519088
Baltacıoğlu, 1999, Effect of zinc stearate and/or epoxidized soybean oil on gelation and thermal stability of PVC-DOP plastigels, J Appl Polym Sci, 74, 2488, 10.1002/(SICI)1097-4628(19991205)74:10<2488::AID-APP18>3.0.CO;2-B
Choi, 2004, Effect of biodegradable plasticizers on thermal and mechanical properties of poly(3-hydroxybutyrate), Polym Test, 23, 455, 10.1016/j.polymertesting.2003.09.005
Donhowe, 1993, The effects of plasticizers on crystallinity, permeability, and mechanical properties of methylcellulose films, J Food Process Pres, 17, 247, 10.1111/j.1745-4549.1993.tb00729.x
Wilson, 1995
Wypych, 2004
Moreno, 1992, The role of slip additives in tape casting technology, part II - binders and plasticizers, J. Am. Ceram. Soc., 71, 1647
Cao, 2009, Effects of various plasticizers on mechanical and water vapor barrier properties of gelatin films, Food Hydrocol, 23, 729, 10.1016/j.foodhyd.2008.07.017
Cheng, 2006, Effects of water-glycerol and water-sorbitol interactions on the physical properties of Konjac Glucomannan films, J Food Sci, 71, E62, 10.1111/j.1365-2621.2006.tb08898.x
Van Oosterhout, 2003, Interactions between PVC and binary or ternary blends of plasticizers. Part I. PVC/plasticizer compatibility, Polymer, 44, 8081, 10.1016/j.polymer.2003.09.065
Plasticizers, 2009, 485
Garcia, 2000, Barrier properties of edible starch-based films and coatings, J Food Sci, 65, 941, 10.1111/j.1365-2621.2000.tb09397.x
Frados, 1976
Krauskopf, 1993, Monomeric plasticizers
Chanda, 1986
Siepmann, 1998, Modeling plasticizer uptake in aqueous polymer dispersions, Int J Pharm, 165, 191, 10.1016/S0378-5173(97)00390-6
Johnson, 1991, Effect of triacetin and polyethylene glycol 400 on some physical properties of hydroxypropyl methylcellulose free films, Int J Pharm, 73, 197, 10.1016/0378-5173(91)90412-H
Bodmeier, 1997, Plasticizer uptake by aqueous colloidal polymer dispersions used for the coating of solid dosage forms, Int J Pharm, 152, 17, 10.1016/S0378-5173(97)04882-5
Donempudi, 1999, Controlled release PVC membranes: Influence of phthalate plasticizers on their tensile properties and performance, Polym Eng Sci, 39, 399, 10.1002/pen.11428
Lindström, 2006, Environmentally friendly plasticizers for poly(vinyl chloride)-Improved mechanical properties and compatibility by using branched poly(butylene adipate) as a polymeric plasticizer, J Appl Polym Sci, 100, 2180, 10.1002/app.23633
Bordes, 2009, Nano-biocomposites: biodegradable polyester/nanoclay systems, Prog Polym Sci, 34, 125, 10.1016/j.progpolymsci.2008.10.002
Averous, 2004, Biocomposites based on plasticized starch: thermal and mechanical behaviors, Carbohydr Polym, 56, 111, 10.1016/j.carbpol.2003.11.015
Tharanathan, 2003, Biodegradable films and composite coatings: past, present and future, Trends Food Sci Technol, 14, 71, 10.1016/S0924-2244(02)00280-7
Bergo, 2008, Physical properties of edible films based on cassava starch as affected by the plasticizer concentration, Packag Technol Sci, 21, 85, 10.1002/pts.781
Ma, 2004, The plasticizers containing amide groups for thermoplastic starch, Carbohydr Polym, 57, 197, 10.1016/j.carbpol.2004.04.012
Shaikh, 2009, Utilization of sugarcane bagasse cellulose for producing cellulose acetates: novel use of residual hemicellulose as plasticizer, J Carbohydr Polym, 76, 23, 10.1016/j.carbpol.2008.09.014
Suyatma, 2005, Effects of hydrophilic plasticizers on mechanical, thermal, and surface properties of chitosan films, J Agric Food Chem, 53, 3950, 10.1021/jf048790+
Karnnet, 2005, Preparation and properties of biodegradable stearic acid-modified gelatin films, Polym Degrad Stab, 90, 106, 10.1016/j.polymdegradstab.2005.02.016
Bergo, 2007, Effects of plasticizer on physical properties of pigskin gelatin films, Food Hydrocolloids, 21, 1285, 10.1016/j.foodhyd.2006.09.014
Audic, 2005, Influence of plasticizers and crosslinking on the properties of biodegradable films made from sodium caseinate, Eur Polym J, 41, 1934, 10.1016/j.eurpolymj.2005.02.023
Bourtoom, 2009, Edible protein films: properties enhancement, Int Food Res J, 16, 1
Cuq, 1997, Selected functional properties of fish myofibrillar protein-based films as affected by hydrophilic plasticizers, J Agric Food Chem, 45, 622, 10.1021/jf960352i
Jongjareonrak, 2006, Effects of plasticizers on the properties of edible films from skin gelatin of bigeye snapper and brownstripe red snapper, Eur Food Res Technol, 222, 229, 10.1007/s00217-005-0004-3
Sobral, 2005, Effect of protein and plasticizer concentrations in film forming solutions on physical properties of edible films based on muscle proteins of a Thai Tilapia, J Food Eng, 70, 93, 10.1016/j.jfoodeng.2004.09.015
Tanaka, 2001, Influence of plasticizers on the properties of edible films prepared from fish water-soluble proteins, Fish Sci, 67, 346, 10.1046/j.1444-2906.2001.00237.x
Pommet, 2003, Study of wheat gluten plasticization with fatty acids, Polymer, 44, 115, 10.1016/S0032-3861(02)00746-2
Pérez-Gago, 2001, Lipid particle size effect on water vapor permeability and mechanical properties of whey protein/beeswax emulsion films, J Agric Food Chem, 49, 996, 10.1021/jf000615f
Galietta, 1998, Mechanical and thermomechanical properties of films based on whey proteins as affected by plasticizer and crosslinking agents, J Dairy Sci, 81, 3123, 10.3168/jds.S0022-0302(98)75877-1
Sothornvit, 2001, Plasticizer effect on mechanical properties of β-lactoglobulin films, J Food Eng, 50, 149, 10.1016/S0260-8774(00)00237-5
Orliac, 2003, Effects of various plasticizers on the mechanical properties, water resistance and aging of thermo-moulded films made from sunflower proteins, Ind Crop Prod, 18, 91, 10.1016/S0926-6690(03)00015-3
Bertan, 2005, Effect of fatty acids and ‘Brazilian elemi’ on composite films based on gelatin, Food Hydrocolloids, 19, 73, 10.1016/j.foodhyd.2004.04.017
Guilbert, 1997, Recent innovations in edible film and/or biodegradable packaging materials, Food Addit Contam, 14, 741, 10.1080/02652039709374585
Krochta, 1997, Edible and biodegradable polymer films: challenges and opportunities, Food Technol, 51, 61
Arvanitoyannis, 1997, Edible films made from gelatin, soluble starch and polyols, part 3, Food Chem, 60, 593, 10.1016/S0308-8146(97)00038-1
Kester, 1986, Edible films and coatings: a review, Food Technol, 40, 47
Guilbert, 1996, Prolongation of the shelf-life of perishable food products using biodegradable films and coatings, Food Sci Technol, 29, 10
Debeaufort, 1998, Edible films and coatings: tomorrow’s packagings: a review, Crit Rev Food Sci, 38, 299, 10.1080/10408699891274219
Markarian, 2008, Biopolymers present new market opportunities for additives in packaging, Plast Addit Compound, 10, 22, 10.1016/S1464-391X(08)70091-6
Silva, 2009, Alginate and pectin composite films crosslinked with Ca2+ ions: Effect of the plasticizer concentration, Carbohydr Polym, 77, 736, 10.1016/j.carbpol.2009.02.014
Yang, 2000, Mechanical and water vapour barrier properties of edible gellan films, Food Res Int, 33, 563, 10.1016/S0963-9969(00)00092-2
Karbowiak, 2006, Effect of plasticizers (water and glycerol) on the diffusion of a small molecule in iota-carrageenan biopolymer films for edible coating application, Biomacromolecules, 7, 2011, 10.1021/bm060179r
Jangchud, 1999, Properties of peanut protein film: sorption isotherm and plasticizer effect, Lebensmittel-Wissenschaft und-Technologie, 32, 79
Sobral, 2002, Glass transition of Nile Tilapia myofibrillar protein films plasticized by glycerin and water, J Therm Anal Calorim, 67, 499, 10.1023/A:1013905400900
Gontard, 1993, Water and glycerol as plasticizers effect mechanical and water vapor barrier properties of an edible wheat gluten film, J Food Sci, 58, 206, 10.1111/j.1365-2621.1993.tb03246.x
Kristo, 2006, Water sorption and thermo-mechanical properties or water/sorbitol-plasticized composite biopolymer films: caseinato pullulan bilayers and blends, Food Hydrocolloids, 20, 1057, 10.1016/j.foodhyd.2005.11.008
Kim, 2001, Solubility and moisture sorption isotherms of whey protein-based edible films as influenced by lipid and plasticizer incorporation, J Agric Food Chem, 49, 4388, 10.1021/jf010122q
McHugh, 1994, Sorbitol- vs glycerol-plasticized whey protein edible films: integrated oxygen permeability and tensile property evaluation, J Agric Food Chem, 42, 841, 10.1021/jf00040a001
Carvalho, 2008, Effect of chemical treatment on the mechanical properties, water vapor permeability and sorption isotherms of gelatin-based films, Packag Technol Sci, 21, 165, 10.1002/pts.792
Zhang, 2006, Mechanical and thermal characteristics of pea starch films plasticized with monosaccharides and polyols, J Food Sci, 71, 109, 10.1111/j.1365-2621.2006.tb08891.x
Moore, 2006, Influence of the glycerol concentration on some physical properties of feather keratin films, Food Hydrocolloids, 20, 975, 10.1016/j.foodhyd.2005.11.001
Thomazine, 2005, Physical properties of gelatin films plasticized by blends of glycerol and sorbitol, J Food Sci, 70, 172, 10.1111/j.1365-2621.2005.tb07132.x
Talja, 2007, Effect of various polyols and polyol contents on physical properties of potato starch-based films, Carbohydr Polym, 67, 288, 10.1016/j.carbpol.2006.05.019
Müller, 2008, Evaluation of the effects of glycerol and sorbitol concentration and water activity on the water barrier properties of cassava starch films through a solubility approach, Carbohydr Polym, 72, 82, 10.1016/j.carbpol.2007.07.026
Fishman, 2000, Extrusion of pectin/starch blends plasticized with glycerol, Carbohydr Polym, 41, 317, 10.1016/S0144-8617(99)00117-4
Mali, 2005, Water sorption and mechanical properties of cassava starch films and their relation to plasticizing effect, Carbohydr Polym, 60, 283, 10.1016/j.carbpol.2005.01.003
Colla, 2006, Amaranthus cruentus flour edible films: influence of stearic acid addition, plasticizer concentration, and emulsion stirring speed on water vapor permeability and mechanical properties, J Agric Food Chem, 54, 6645, 10.1021/jf0611217
Galdeano, 2009, Effects of production process and plasticizers on stability of films and sheets of oat starch, Mater Sci Eng C, 29, 492, 10.1016/j.msec.2008.08.031
Galdeano, 2009, Effects of plasticizers on the properties of oat starch films, Mater Sci Eng C, 29, 532, 10.1016/j.msec.2008.09.034
Smits, 2003, Interaction between dry starch and glycerol or ethylene glycol, measured by differential scanning calorimetry and solid state NMR spectroscopy, Carbohydr Polym, 53, 409, 10.1016/S0144-8617(03)00119-X
Honary, 2002, The effect of different plasticizer molecular weights and concentrations on mechanical and thermomechanical properties of free films, Drug Dev Ind Pharm, 28, 711, 10.1081/DDC-120003863
Sobral, 2001, Mechanical, water vapor barrier and thermal properties of gelatin based edible films, Food Hydrocolloids, 15, 423, 10.1016/S0268-005X(01)00061-3
Rotta, 2009, Parameters of color, transparency, water solubility, wettability and surface free energy of chitosan/hydroxypropylmethylcellulose (HPMC) films plasticized with sorbitol, Mater Sci Eng C, 29, 619, 10.1016/j.msec.2008.10.032
Navarro-Tarazaga, 2008, Effect of plasticizer type and amount on hydroxypropyl methylcellulose−beeswax edible film properties and postharvest quality of coated plums (Cv. Angeleno), J Agric Food Chem, 56, 9502, 10.1021/jf801708k
Jongjareonrak, 2006, Fatty acids and their sucrose esters affect the properties of fish skin gelatin based film, Eur Food Res Technol, 222, 650, 10.1007/s00217-005-0151-6
Santosa, 1999, Tensile properties and water absorption of zein sheets plasticized with oleic and linoleic acids, J Agric Food Chem, 47, 2070, 10.1021/jf981154p
Donhowe, 1994, Edible films and coatings: characteristics, formation, definitions, and testing methods, 1
Veiga-Santos, 2007, Sucrose and inverted sugar as plasticizer. Effect on cassava starch–gelatin film mechanical properties, hydrophilicity and water activity, Food Chem, 103, 255, 10.1016/j.foodchem.2006.07.048
Huang, 2005, Ethanolamine as a novel plasticizer for thermoplastic starch, Polym Degrad Stab, 90, 501, 10.1016/j.polymdegradstab.2005.04.005
Stein, 1999, Amino acids as plasticizers: II. Use of quantitative structure–property relationships to predict the behavior of monoammoniummonocarboxylate plasticizers in starch–glycerol blends, Carbohydr Polym, 39, 7, 10.1016/S0144-8617(98)00136-2
Ghebremeskel, 2007, Use of surfactants as plasticizers in preparing solid dispersions of poorly soluble API: selection of polymer–surfactant combinations using solubility parameters and testing the processability, Int J Pharm, 328, 119, 10.1016/j.ijpharm.2006.08.010
Van de Velde, 2002, Biopolymers: overview of several properties and consequences on their applications, Polym Test, 21, 433, 10.1016/S0142-9418(01)00107-6
Ma, 2009, Properties of biodegradable citric acid-modified granular starch/thermoplastic pea starch composites, Carbohydr Polym, 75, 1, 10.1016/j.carbpol.2008.05.020
Van Soest, 1997, Influence of glycerol and water content on the structure and properties of extruded starch plastic sheets during aging, J Appl Polym Sci, 64, 1411, 10.1002/(SICI)1097-4628(19970516)64:7<1411::AID-APP21>3.0.CO;2-Y
Rodríguez, 2006, Combined effect of plasticizers and surfactants on the physical properties of starch based edible films, Food Res Int, 39, 840, 10.1016/j.foodres.2006.04.002
Funke, 1998, Processing and characterization of biodegradable products based on starch, Polym Degrad Stab, 59, 293, 10.1016/S0141-3910(97)00163-8
Fringant, 1998, Preparation of mixed esters of starch or use of an external plasticizer: two different ways to change the properties of starch acetate films, Carbohydr Polym, 35, 97, 10.1016/S0144-8617(97)00250-6
Vanin, 2005, Effects of plasticizers and their concentrations on thermal and functional properties of gelatin-based films, Food Hydrocol, 19, 899, 10.1016/j.foodhyd.2004.12.003
Yoshie, 2000, Effect of low molecular weight additives on enzymatic degradation of poly(3-hydroxybutyrate), Polym, 41, 3227, 10.1016/S0032-3861(99)00547-9
Ou, 2005, Role of ferulic acid in preparing edible films from soy protein isolate, J Food Eng, 70, 205, 10.1016/j.jfoodeng.2004.09.025
Cuq, 1995, Edible packaging films based on fish myofbrillar proteins: formulation and functional properties, J Food Sci, 60, 1369, 10.1111/j.1365-2621.1995.tb04593.x
Bucci, 2005, PHB packaging for the storage of food products, Polym Test, 24, 564, 10.1016/j.polymertesting.2005.02.008