Nanoindentation in polymer nanocomposites

Pethica, 1982, Microhardness tests with penetration depths less than ion implanted layer thickness, 147 Fischer-Cripps, 2004 Doerner, 1986, A method for interpreting the data from depth-sensing indentation instruments, J Mater Res, 1, 601, 10.1557/JMR.1986.0601 Oliver, 1992, An improved technique for determining hardness and elastic modulus using load displacement sensing indentation experiments, J Mater Res, 7, 1564, 10.1557/JMR.1992.1564 Pharr, 2009, Critical issues in making small-depth mechanical property measurements by nanoindentation with continuous stiffness measurement, J Mater Res, 24, 653, 10.1557/jmr.2009.0096 VanLandingham, 2001, Nanoindentation of polymers: an overview, Macromol Symp, 167, 15, 10.1002/1521-3900(200103)167:1<15::AID-MASY15>3.0.CO;2-T Fischer-Cripps, 2006, Critical review of analysis and interpretation of nanoindentation test data, Surf Coat Technol, 200, 4153, 10.1016/j.surfcoat.2005.03.018 Hochstetter, 1999, Strain-rate effects on hardness of glassy polymers in the nanoscale range. Comparison between quasi-static and continuous stiffness measurements, J Macromol Sci Phys, 38, 681, 10.1080/00222349908248131 Turnbull, 1996, Nanoindentation and microindentation of weathered unplasticised poly-vinyl chloride (UPVC), J Mater Sci, 31, 4189, 10.1007/BF00356438 Flores, 1998, Mechanical properties of poly(ethylene terephthalate) at the near surface form depth-sensing experiments, Phil Mag, 78, 1283, 10.1080/01418619808239987 Beake, 2002, Nanoindentation and nanoscratch testing of uniaxially and biaxially drawn poly(ethylene terephthalate) film, Polymer, 43, 319, 10.1016/S0032-3861(01)00600-0 Tranchida, 2007, Mechanical characterization of polymers on a nanometer scale through nanoindentation. A study on pile-up and viscoelasticity, Macromolecules, 40, 1259, 10.1021/ma062140k Briscoe, 1998, Nano-indentation of polymeric surfaces, J Phys D: Appl Phys, 31, 2395, 10.1088/0022-3727/31/19/006 Pethica, 1989, Mechanical properties of nanometer volumes of material: use of the elastic response of small area indentations, vol. 130, 13 Tranchida, 2006, Nanoscale mechanical characterization of polymers by AFM nanoindentations: critical approach to the elastic characterization, Macromolecules, 39, 4547, 10.1021/ma052727j Cohen, 2013, Dynamic nanoindentation by instrumented nanoindentation and force microscopy: a comparative review, Beilstein J Nanotechnol, 4, 815, 10.3762/bjnano.4.93 Manias, 2007, Nanocomposites: stiffer by design, Nat Mater, 6, 9, 10.1038/nmat1812 Kickelbick, 2003, Concepts for the incorporation of inorganic building blocks into organic polymers on a nanoscale, Prog Polym Sci, 28, 83, 10.1016/S0079-6700(02)00019-9 Rahman, 2011, A review of the applications of nanocarbon polymer composites, Nano, 6, 185, 10.1142/S179329201100255X Liu, 2004, Morphology and mechanical properties of multiwalled carbon nanotubes reinforced nylon-6 composites, Macromolecules, 37, 7214, 10.1021/ma049132t Das, 2009, Nano-indentation studies on polymer matrix composites reinforced by few-layer graphene, Nanotechnology, 20, 125705, 10.1088/0957-4484/20/12/125705 Flores, 2013, Evaluating the reinforcement of inorganic fullerene-like nanoparticles in thermoplastic matrices by depth-sensing indentation, J Phys Chem C, 117, 20936, 10.1021/jp406513y Shen, 2004, Nanoindentation and morphological studies on nylon-66 nanocomposites, Polymer, 45, 3341, 10.1016/j.polymer.2004.03.036 Dutta, 2004, Nanoindentation testing for evaluating modulus and hardness of single-walled carbon nanotube–reinforced epoxy composites, J Mater Res, 19, 158, 10.1557/jmr.2004.19.1.158 Oliver, 2004, Measurements of hardness and elastic modulus by instrumented indentation: advances in understanding and refinements to methodology, J Mater Res, 19, 3, 10.1557/jmr.2004.19.1.3 Martin, 2002, Fundamental relations used in nanoindentation: critical examination on experimental measurements, J Mater Res, 17, 2227, 10.1557/JMR.2002.0328 Klapperich, 2001, Nanomechanical properties of polymers determined from nanoindentation experiments, J Tribol, 123, 624, 10.1115/1.1330736 Olek, 2005, Nanomechanical properties of silica-coated multiwall carbon nanotubes-poly(methyl methacrylate) composites, Langmuir, 21, 3146, 10.1021/la0470784 Hay, 2000, Instrumented indentation testing, vol. 8, 232 Feng, 2002, Effects of creep and thermal drift on modulus measurement using depth-sensing indentation, J Mater Res, 17, 660, 10.1557/JMR.2002.0094 Cheng, 2000, Flat-punch indentation of viscoelastic material, J Polym Sci B: Polym Phys, 38, 10, 10.1002/(SICI)1099-0488(20000101)38:1<10::AID-POLB2>3.0.CO;2-6 Tweedie, 2006, Contact creep compliance of viscoelastic materials via nanoindentation, J Mater Res, 21, 1576, 10.1557/jmr.2006.0197 VanLandingham, 2005, Viscoelastic characterization of polymers using instrumented indentation. I. Quasi-static testing, J Polym Sci B: Polym Phys, 43, 1794, 10.1002/polb.20454 Oyen, 2005, Spherical indentation creep following ramp loading, J Mater Res, 20, 2094, 10.1557/JMR.2005.0259 Fischer-Cripps, 2004, A simple phenomenological approach to nanoindentation creep, Mat Sci Eng A, 385, 74, 10.1016/j.msea.2004.04.070 Monclus, 2011, In search of validated measurements of the properties of viscoelastic materials by indentation with sharp indenters, Phil Mag, 91, 1308, 10.1080/14786435.2010.504197 Zhang, 2004, Extracting the mechanical properties of a viscoelastic polymeric film on a hard elastic substrate, J Mater Res, 19, 3053, 10.1557/JMR.2004.0382 Cheng, 2005, Spherical-tip indentation of viscoelastic material, Mech Mater, 37, 213, 10.1016/j.mechmat.2004.03.002 Oyen, 2006, Analytical techniques for indentation of viscoelastic materials, Phil Mag, 86, 5625, 10.1080/14786430600740666 Oyen, 2003, Load–displacement behavior during sharp indentation of viscous–elastic–plastic materials, J Mater Res, 18, 139, 10.1557/JMR.2003.0020 Mencik, 2009, Determination of viscoelastic–plastic material parameters of biomaterials by instrumented indentation, J Mech Behav Biomed Mater, 2, 318, 10.1016/j.jmbbm.2008.09.002 Lucas, 1999, Indentation power-law creep of high-purity indium, Metall Mat Trans A, 30, 601, 10.1007/s11661-999-0051-7 Maier, 2011, Nanoindentation strain-rate jump tests for determining the local strain-rate sensitivity in nanocrystalline Ni and ultrafine-grained Al, J Mater Res, 26, 1421, 10.1557/jmr.2011.156 Beake, 2006, Modelling indentation creep of polymers: a phenomenological approach, J Phys D: Appl Phys, 39, 4478, 10.1088/0022-3727/39/20/027 Berthoud, 1999, Elastic–plastic indentation creep of glassy poly(methyl methacrylate) and polystyrene: characterization using uniaxial compression and indentation tests, J Phys D: Appl Phys, 32, 2923, 10.1088/0022-3727/32/22/315 White, 2005, Viscoelastic characterization of polymers using instrumented indentation. II. Dynamic testing, J Polym Sci: B: Polym Phys, 43, 1812, 10.1002/polb.20455 Herbert, 2008, Nanoindentation and the characterization of viscoelastic solids, J Phys D: Appl Phys, 41, 74021, 10.1088/0022-3727/41/7/074021 Odegard, 2005, Characterization of viscoelastic properties of polymeric materials through nanoindentation, Exp Mech, 45, 130, 10.1007/BF02428185 Hay, 2010, Continuous stiffness measurements during instrumented indentation testing, Exp Tech, 34, 86, 10.1111/j.1747-1567.2010.00618.x Wright, 2007, An improved analysis for viscoelastic damping in dynamic nanoindentation, Int J Surf Sci Eng, 1, 274, 10.1504/IJSURFSE.2007.015029 Wright, 2009, Storage and loss stiffnesses and moduli as determined by dynamic, J Mater Res, 24, 863, 10.1557/jmr.2009.0112 Gilman, 2009, 20 Pharr, 2010, The indentation size effect: a critical examination of experimental observations and mechanistic interpretations, Annu Rev Mater Res, 40, 271, 10.1146/annurev-matsci-070909-104456 Chong, 1999, Strain gradient plasticity effect in indentation hardness of polymers, J Mater Res, 14, 4103, 10.1557/JMR.1999.0554 Gao, 2006, New expanding cavity model for indentation hardness including strain-hardening and indentation size effects, J Mater Res, 21, 1317, 10.1557/jmr.2006.0158 Lucas, 1997, Time-dependent deformation during indentation testing, Mat Res Soc Symp Proc, 436, 233, 10.1557/PROC-436-233 Li, 2004, Nanomechanical characterization of single-walled carbon nanotube reinforced epoxy composites, Nanotechnology, 15, 1416, 10.1088/0957-4484/15/11/005 Shen, 2004, Nanoindentation and morphological studies on nylon 66/organoclaynanocomposites. II. Effect of strain rate, Polymer, 45, 8221, 10.1016/j.polymer.2004.09.062 King, 1987, Elastic analysis of some punch problems for a layered medium, Int J Solids Struct, 23, 1657, 10.1016/0020-7683(87)90116-8 Saha, 2002, Effects of the substrate on the determination of thin film mechanical properties by nanoindentation, Acta Mater, 50, 23, 10.1016/S1359-6454(01)00328-7 Gao, 1992, Elastic contact versus indentation modelling of multi-layered materials, Int J Solids Struct, 29, 2471, 10.1016/0020-7683(92)90004-D Rar, 2001, Assessment of new relation for the elastic compliance of a film-substrate system, MRS Proc, 695, L10, 10.1557/PROC-695-L10.10.1 Menčík, 1997, Determination of elastic modulus of thin layers using nanoindentation, J Mater Res, 12, 2475, 10.1557/JMR.1997.0327 Bec, 2006, A simple guide to determine elastic properties of films on substrate from nanoindentation experiments, Phil Mag, 86, 5347, 10.1080/14786430600660856 Hay, 2011, Measuring substrate-independent modulus of thin films, J Mater Res, 26, 727, 10.1557/jmr.2011.8 ISO 14577-4:2007. Metallic materials – instrumented indentation test for hardness and materials parameters. Part 4: Test method for metallic and non-metallic coatings. Han, 2011, Extracting thin film hardness of extremely compliant films on stiff substrates, Thin Solid Films, 519, 3221, 10.1016/j.tsf.2010.12.167 Baltá-Calleja, 2000 Flores, 2009, From the glassy state to ordered polymer structures: a microhardness study, Polymer, 50, 729, 10.1016/j.polymer.2008.11.037 Flores, 2001, Creep behavior and elastic properties of annealed cold-drawn poly(ethylene terephthalate): the role of the smectic structure as a precursor of crystallization, J Appl Phys, 90, 6006, 10.1063/1.1418000 Deslandes, 1991, Correlation of microhardness and morphology of poly(ether-ether-ketone) films, J Mater Sci, 26, 2769, 10.1007/BF02387749 Lakes, 2009 Hashin, 1963, A variational approach to the theory of the elastic behaviour of multiphase materials, J Mech Phys Solids, 11, 127, 10.1016/0022-5096(63)90060-7 Halpin, 1976, The Halpin–Tsai equations: a review, Polym Eng Sci, 16, 344, 10.1002/pen.760160512 Zhang, 2009, Viscoelastic properties of nanosilica-filled epoxy composites investigated by dynamic nanoindentation, J Polym Sci Polym Phys, 47, 1030, 10.1002/polb.21709 Wang, 2011, Mechanical and tribological behavior of epoxy/silica nanocomposites at the micro/nano scale, Tribol Lett, 42, 185, 10.1007/s11249-011-9762-1 Lin, 2007, Low dielectric constant nanocomposite thin films based on silica nanoparticle and organic thermosets, J Polym Sci B: Polym Phys, 45, 1482, 10.1002/polb.21165 Bhattacharya, 2013, High-performance silica nanoparticle reinforced poly (vinyl alcohol) as templates for bioactive nanocomposites, Mater Sci Eng C, 33, 2601, 10.1016/j.msec.2013.02.029 Herbert, 2009, Measuring the constitutive behavior of viscoelastic solids in the time and frequency domain using flat punch nanoindentation, J Mater Res, 24, 626, 10.1557/jmr.2009.0089 Hayes, 2004, Dynamic nanoindentation as a tool for the examination of polymeric materials, J Mater Res, 19, 3298, 10.1557/JMR.2004.0437 Stojanovic, 2009, Nanosilica/PMMA composites obtained by the modificationof silica nanoparticles in a supercritical carbon dioxide–ethanol mixture, J Mater Sci, 44, 6223, 10.1007/s10853-009-3842-8 Guillonneau, 2012, Extraction of mechanical properties with second harmonic detection for dynamic nanoindentation testing, Exp Mech, 52, 933, 10.1007/s11340-011-9561-5 Iijima, 1991, Helical microtubules of graphitic carbon, Nature, 354, 56, 10.1038/354056a0 Popov, 2004, Carbon nanotubes: properties and application, Mater Sci Eng R, 43, 61, 10.1016/j.mser.2003.10.001 Thostenson, 2001, Advances in the science and technology of carbon nanotubes and their composites: a review, Compos Sci Technol, 61, 1899, 10.1016/S0266-3538(01)00094-X Dervishi, 2009, Carbon nanotubes: synthesis, properties, and applications, Particulate Sci Technol, 27, 107, 10.1080/02726350902775962 Díez-Pascual, 2009, Development and characterization of PEEK/carbon nanotube composites, Carbon, 47, 3079, 10.1016/j.carbon.2009.07.020 González-Domínguez, 2011, Solvent-free preparation of high-toughness epoxy-SWNT composite materials, ACS Appl Mater Interfaces, 3, 1441, 10.1021/am101260a Ma, 2010, Dispersion and functionalization of carbon nanotubes for polymer-based nanocomposites: a review, Composites Part A, 41, 1345, 10.1016/j.compositesa.2010.07.003 Li, 1999, Transformation of carbon nanotubes to nanoparticles by ball milling process, Carbon, 37, 493, 10.1016/S0008-6223(98)00218-8 Chen, 2013, Improving the mechanical properties of epoxy using multiwalled carbon nanotubes functionalized by a novel plasma treatment, Composites Part A, 45, 145, 10.1016/j.compositesa.2012.09.005 Karousis, 2010, Current progress on the chemical modification of carbon nanotubes, Chem Rev, 110, 5366, 10.1021/cr100018g Díez-Pascual, 2012, Grafting of an aminated poly(phenylene sulphide) derivative to functionalized single-walled carbon nanotubes, Carbon, 50, 857, 10.1016/j.carbon.2011.09.046 Huang, 2002, Sonication-assisted functionalization and solubilization of carbon nanotubes, Nano Lett, 2, 231, 10.1021/nl010083x Chen, 2012, Practical amine functionalization of multi-walled carbon nanotubes for effective interfacial bonding, Plasma Process Polym, 9, 733, 10.1002/ppap.201100203 Samad, 2011, Mechanical, thermal and tribological characterization of a UHMWPE film reinforced with carbon nanotubes coated on steel, Tribol Int, 44, 1932, 10.1016/j.triboint.2011.08.001 Yun, 2008, Mechanical properties of biodegradable polyhydroxyalkanoates/single wall carbon nanotube nanocomposite films, Polym Bull, 61, 267, 10.1007/s00289-008-0936-4 Wu, 2011, Preparation and properties of chitosan nanocomposite films reinforced by poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) treated carbon nanotubes, Mater Chem Phys, 129, 932, 10.1016/j.matchemphys.2011.05.030 Wang, 2005, Preparation and mechanical properties of chitosan/carbon nanotubes composites, Biomacromolecules, 6, 3067, 10.1021/bm050378v Baji, 2010, Mechanical behavior of self-assembled carbon nanotube reinforced nylon 6,6 fibers, Compos Sci Technol, 70, 1401, 10.1016/j.compscitech.2010.04.020 Fung PY. Poly(L-Lactide)/multi walled carbon nanotube composites: Mechanical properties and interaction with osteoblast-like cells in vitro. Ph.D. Thesis. Hong Kong: Polytechnic University; 2007. Olek, 2006, Multiwall carbon nanotubes-based composites-mechanical characterization using the nanoindentation technique, Int J Mater Res, 97, 1235, 10.3139/146.101363 Cadek, 2002, Morphological and mechanical properties of carbon-nanotube-reinforced semicrystalline and amorphous polymer composites, Appl Phys Lett, 81, 5123, 10.1063/1.1533118 Sreekanth, 2013, Assessment of bulk and surface properties of medical grade UHMWPE based nanocomposites using nanoindentation and microtensile testing, J Mech Behav Biomed Mater, 18, 140, 10.1016/j.jmbbm.2012.11.011 Bakshi, 2007, The nanomechanical and nanoscratchproperties of MWNT reinforced ultrahigh-molecular-weight polyethylene coatings, J Miner Met Mater Soc, 59, 50, 10.1007/s11837-007-0089-1 Bhandari, 2012, Depth-dependent indentation microhardness studies of different polymer nanocomposites, Macromol Symp, 315, 44, 10.1002/masy.201250506 Wang, 2013, Synthesis of isocyanate microcapsules and micromechanical behavior improvement of microcapsule shells by oxygen plasma treated carbon nanotubes, J Mater Chem A, 1, 776, 10.1039/C2TA00612J Dos Santos, 2011, Thermal and mechanical properties of a nanocomposite of a photocurable epoxy-acrylate resin and multiwalled carbon nanotubes, Mater Sci Eng A, 528, 4318, 10.1016/j.msea.2011.02.036 Tehrani, 2011, Nanocharacterization of creep behavior of multiwall carbon nanotubes/epoxy nanocomposite, Int J Plasticity, 27, 887, 10.1016/j.ijplas.2010.10.005 Ayatollahi, 2012, Nano-/microscale investigation of tribological and mechanical properties of epoxy/MWNT nanocomposites, Macromol Mater Eng, 297, 689, 10.1002/mame.201100271 Mionic, 2010, Study of the mechanical response of carbon nanotubes-SU8 composites by nanoindentation, Phys Status Solidi B, 247, 3072, 10.1002/pssb.201000305 Her, 2012, Carbon nanotubes reinforced nanocomposite films by nanoindentation technique, Adv Sci Lett, 13, 547, 10.1166/asl.2012.3884 Lagoudas DC, Thakre PR, Benzerga AA. Nanoindentation on CNT reinforced epoxy nanocomposites. In: Proceedings of the 16th European conference on fracture (ECF16). Alexandroupolis (Greece); 2006. Penumadu, 2003, Mechanical properties of blended single-wall carbon nanotube composites, J Mater Res, 18, 1849, 10.1557/JMR.2003.0258 Wang, 2008, Tribological behaviors of aligned carbon nanotube/fullerene-epoxy nanocomposites, Polym Eng Sci, 48, 1467, 10.1002/pen.21068 Jiang, 2011, Formation and mechanical characterisation of SU8 composite films reinforced with horizontally aligned and high volume fraction CNTs, Compos Sci Technol, 71, 1301, 10.1016/j.compscitech.2011.04.017 Cebeci, 2009, Multifunctional properties of high volume fraction aligned carbon nanotube polymer composites with controlled morphology, Compos Sci Technol, 69, 2649, 10.1016/j.compscitech.2009.08.006 Li, 2008, Mechanical properties of epoxy-based composites using coiled carbon nanotubes, Compos Sci Technol, 68, 2876, 10.1016/j.compscitech.2007.10.019 Qian, 2011, Mapping local microstructure and mechanical performance around carbon nanotube grafted silica fibres: methodologies for hierarchical composites, Nanoscale, 3, 4759, 10.1039/c1nr10497g Liu, 2013, Piezoelectric properties of PVDF/MWCNT nanofiber using near-field electrospinning, Sens Actuators A, 193, 13, 10.1016/j.sna.2013.01.007 Prasad, 2009, Extraordinary synergy in the mechanical properties of polymer matrix composites reinforced with 2 nanocarbons, Proc Natl Acad Sci, 106, 13186, 10.1073/pnas.0905844106 Díez-Pascual, 2012, Nanoindentation assessment of the interphase in carbon nanotube-based hierarchical composites, J Phys Chem C, 116, 24193, 10.1021/jp309067e Díez-Pascual, 2011, Influence of carbon nanotubes on the thermal, electrical and mechanical properties of poly(ether ether ketone)/glass fiber laminates, Carbon, 49, 2817, 10.1016/j.carbon.2011.03.011 Wu, 2009, Static and dynamic mechanical properties of polydimethylsiloxane/carbon nanotube nanocomposites, Thin Solid Films, 517, 4895, 10.1016/j.tsf.2009.03.146 Nagy, 2006, Nanoindentation investigation of carbon nanotube–polymer composites, Internet Electron J Mol Des, 5, 135 Satyanarayana, 2007, Carbon nanotube reinforced polyimide thin-film for high wear durability, Tribol Lett, 27, 181, 10.1007/s11249-007-9219-8 Mammeri, 2012, Mechanical properties of carbon nanotube–PMMA based hybrid coatings: the importance of surface chemistry, RSC Adv, 2, 2462, 10.1039/c2ra00937d Salvetat, 1999, Mechanical properties of carbon nanotubes, Appl Phys A: Mater Sci Process, 69, 255, 10.1007/s003390050999 Bauhofer, 2009, A review and analysis of electrical percolation in carbon nanotube polymer composites, Compos Sci Technol, 69, 1486, 10.1016/j.compscitech.2008.06.018 Lau, 2006, Coiled carbon nanotubes: synthesis and their potential applications in advanced composite structures, Compos Part B, 37, 437, 10.1016/j.compositesb.2006.02.008 Lu, 2006, Characterization of the linear viscoelastic behavior of single-wall carbon nanotube/polyelectrolyte multilayer nanocomposite film using nanoindentation, Thin Solid Films, 500, 197, 10.1016/j.tsf.2005.11.051 Huang, 2006, Material characterization and modeling of single-wall carbon nanotube/polyelectrolyte multilayer nanocomposites, J Appl Mech, 73, 737, 10.1115/1.2206196 Firkowska, 2006, Highly ordered MWNT-based matrixes: topography at the nanoscale conceived for tissue engineering, Langmuir, 22, 5427, 10.1021/la053067e Lee, 2011, Suspended carbon nanotube nanocomposite beams with a high mechanical strength via layer-by-layer nano-self-assembly, Nanotechnology, 22, 165601, 10.1088/0957-4484/22/16/165601 Pavoor, 2004, Engineering the friction-and-wear behavior of polyelectrolyte multilayer nanoassembliesthrough block copolymer surface capping, metallic nanoparticles, and multiwall carbon nanotubes, J Appl Polym Sci, 92, 439, 10.1002/app.20011 Díez-Pascual AM, Naffakh M, Marco C, Gómez-Fatou MA, Ellis GJ. Multiscale fiber-reinforced thermoplastic composites incorporating carbon nanotubes: a review. Current Opinion Solid State Mater Sci. http://dx.doi.org/10.1016/j.cossms.2013.06.003 Geim, 2007, The rise of graphene, Nat Mater, 6, 183, 10.1038/nmat1849 Novoselov, 2004, Electric field in atomically thin carbon films, Science, 306, 666, 10.1126/science.1102896 Novoselov, 2012, A roadmap for graphene, Nature, 490, 192, 10.1038/nature11458 Balandin, 2008, Superior thermal conductivity of single-layer graphene, Nano Lett, 8, 902, 10.1021/nl0731872 Kim, 2010, Graphene/polymer nanocomposites, Macromolecules, 43, 6515, 10.1021/ma100572e Lee, 2008, Measurement of the elastic properties and intrinsic strength of monolayer graphene, Science, 321, 385, 10.1126/science.1157996 Warner, 2013 Potts, 2011, Graphene-based polymer nancomposites, Polymer, 52, 5, 10.1016/j.polymer.2010.11.042 Huang, 2012, Graphene-based composites, Chem Soc Rev, 41, 666, 10.1039/C1CS15078B Das, 2013, Graphene-based polymer composites and their applications, Polym Plast Tech Eng, 52, 319, 10.1080/03602559.2012.751410 Salavagione, 2011, Recent advances in the covalent modification of graphene with polymers, Macromol Rapid Commun, 32, 1771, 10.1002/marc.201100527 Sutter, 2009, Epitaxial graphene: how silicon leaves the scene, Nat Mater, 8, 171, 10.1038/nmat2392 Yuan, 2009, Graphene sheets via microwave chemical vapor deposition, Chem Phys Lett, 467, 361, 10.1016/j.cplett.2008.11.059 McAllister, 2007, Single sheet functionalized graphene by oxidation and thermal expansion of graphite, Chem Mater, 19, 4396, 10.1021/cm0630800 Stankovich, 2007, Synthesis of graphene-based nanosheets via chemical reduction of exfoliated graphite oxide, Carbon, 45, 1558, 10.1016/j.carbon.2007.02.034 Morales, 2011, High-quality few layer graphene produced by electrochemical intercalation and microwave-assisted expansion of graphite, Carbon, 49, 2809, 10.1016/j.carbon.2011.03.008 Kuilla, 2010, Recent advances in graphene based polymer composites, Prog Polym Sci, 35, 1350, 10.1016/j.progpolymsci.2010.07.005 Shin, 2012, Evaluation of anti-scratch properties of graphene oxide/polypropylene nanocomposites, J Mater Chem, 22, 7871, 10.1039/c2jm15569a Chakraborty, 2012, Exfoliated graphite reinforced PMMA composite: a study on nanoindentation and scratch behavior, J Nanotechnology, 5 Fan, 2010, Fabrication, mechanical properties, and biocompatibility of graphene-reinforced chitosan composites, Biomacromolecules, 11, 2345, 10.1021/bm100470q Chen, 2013, Nanomechanical properties of graphene on poly(ethylene terephthalate) substrate, Carbon, 55, 144, 10.1016/j.carbon.2012.12.020 Yousefi, 2013, Highly aligned, ultralarge-size reduced graphene oxide/polyurethane nanocomposites: mechanical properties and moisture permeability, Compos A, 49, 42, 10.1016/j.compositesa.2013.02.005 Cai, 2012, High performance polyurethane/functionalized graphene nanocomposites with improved mechanical and thermal properties, Compos Sci Technol, 72, 702, 10.1016/j.compscitech.2012.01.020 Lee, 2013, The effect of graphene nanofiller on the crystallization behavior and mechanical properties of poly(vinyl alcohol), Polym Int, 62, 901, 10.1002/pi.4370 Goncalves, 2010, Graphene oxide modified with PMMA via ATRP as a reinforcement filler, J Mater Chem, 20, 9927, 10.1039/c0jm01674h Salavagione, 2009, Polymeric modification of graphene through esterification of graphite oxide and poly(vinyl alcohol), Macromolecules, 42, 6331, 10.1021/ma900845w Salavagione, 2010, Graphene-based polymer nanocomposites, vol. 1, 169 Castelain, 2012, Graphene functionalization with a conjugated poly(fluorene) via “click” coupling. Striking electronic properties in solution, Chem A Eur J, 18, 4965, 10.1002/chem.201102008 Castelaín, 2013, Versatile chemical tool for the preparation of conductive graphene-based polymer nanocomposites, Chem Comm, 49, 8967, 10.1039/c3cc43729a Chasiotis, 2005, Structure–property relationships in polymer composites with micrometer and submicrometer graphite platelets, Exp Mech, 45, 507, 10.1007/BF02427904 Odegard, 2006, Modeling and testing of the viscoelastic properties of a graphite nanoplatelet/epoxy composite, J Intell Mater Syst Struct, 17, 239, 10.1177/1045389X06057523 Shokrieh, 2013, Nanoindentation and nanoscratch investigations on graphene-based nanocomposites, Polym Test, 32, 45, 10.1016/j.polymertesting.2012.09.001 King, 2013, Mechanical properties of graphene nanoplatelet/epoxy composites, J Appl Polym Sci, 128, 4217, 10.1002/app.38645 Zandiatashbar, 2011, Depth sensing indentation on nanoscale graphene platelets in nanocomposite thin films, Mater Res Soc Symp, 1312, 379, 10.1557/opl.2011.125 Martin-Gallego, 2012, Cationic photocured epoxy nanocomposites filled with different carbon fillers, Polymer, 53, 1831, 10.1016/j.polymer.2012.02.054 Neto, 2013, Nano-modified adhesive by graphene: the single lap-joint case, Mater Res, 16, 592, 10.1590/S1516-14392013005000022 Zhao, 2010, Alternate multilayer films of poly(vinyl alcohol) and exfoliated graphene oxide fabricated via a facial layer-by-layer assembly, Macromolecules, 43, 9411, 10.1021/ma101456y Wang, 2012, Self-assembly of graphene oxide and polyelectrolyte complex nanohybrid membranes for nanofiltration and pervaporation, Chem Eng J, 213, 318, 10.1016/j.cej.2012.09.080 Gómez-Navarro, 2008, Elastic properties of chemically derived single graphene sheets, Nano Lett, 8, 2045, 10.1021/nl801384y Zandiatashbar, 2012, Control of epoxy creep using graphene, Small, 8, 1676, 10.1002/smll.201102686 Li, 2011, Effect of carbon nanofibers on the infiltration and thermal conductivity of carbon/carbon composites, Mater Res Bull, 46, 1437, 10.1016/j.materresbull.2011.05.004 Endo, 1976, Structure improvement of carbon fibers prepared from benzene, Jpn J Appl Phys, 15, 2073, 10.1143/JJAP.15.2073 Zhou, 2009, Development of carbon nanofibers from aligned electrospun polyacrylonitrile nanofiber bundles and characterization of their microstructural, electrical, and mechanical properties, Polymer, 50, 2999, 10.1016/j.polymer.2009.04.058 Ozkan T, Naraghi M, Polycarpou AA, Chasiotis I. Mechanical strength of pyrolytically stripped and functionalized heat treated vapor grown carbon nanofibers. In: 11th International congress and exhibition on experimental and applied mechanics 2008, Orlando, FL; 2008. p. 1108–13. Xia, 2005, Chemical vapor deposition and synthesis on carbon nanofibers: sintering of ferrocene-derived supported iron nanoparticles and the catalytic growth of secondary carbon nanofibers, Chem Mater, 17, 5737, 10.1021/cm051623k Iakoubovskii, 2000, Structure and defects of detonation synthesis nanodiamond, Diamond Relat Mater, 9, 861, 10.1016/S0925-9635(99)00354-4 Khachatryan, 2008, Graphite-to-diamond transformation induced by ultrasonic cavitation, Diamond Relat Mater, 17, 931, 10.1016/j.diamond.2008.01.112 Kidalov, 2007, Thermal conductivity of nanocomposites based on diamonds and nanodiamonds, Diamond Relat Mater, 16, 2063, 10.1016/j.diamond.2007.07.010 Blank, 1998, Ultrahard and superhard phases of fullerite C60: Comparison with diamond on hardness and wear, Diamond Relat Mater, 7, 427, 10.1016/S0925-9635(97)00232-X Dubrovinskaia, 2005, Aggregated diamond nanorods, the densest and least compressible form of carbon, Appl Phys Lett, 87, 83106, 10.1063/1.2034101 Zhang, 2011, Fluorescent PLLA-nanodiamond composites for bone tissue engineering, Biomaterials, 32, 87, 10.1016/j.biomaterials.2010.08.090 Murayama, 2004, Fullerene production in tons and more: from science to industry, Fullerenes Nanotubes Carbon Nanostruct, 12, 1, 10.1081/FST-120027125 Kroto, 1985, C60: buckminsterfullerene, Nature, 318, 162, 10.1038/318162a0 Donnet, 1976 Barton, 2007, Development and modelling of electrically conductive carbon filled liquid crystalline polymer composites for fuel cell bipolar plate applications, J New Mater Electrochem Syst, 10, 225 Khizhnyak, 1979, Thermal conductivity of carbon black, J Eng Phys, 37, 1073, 10.1007/BF00861683 Seena, 2011, Polymer nanocomposite nanomechanical cantilever sensors: material characterization, device development and application in explosive vapour detection, Nanotechnology, 22, 295501, 10.1088/0957-4484/22/29/295501 Peng, 2001, Chemistry and applications of nanocrystalline cellulose and its derivatives: a nanotechnology perspective, Can Journal Chem Eng, 89, 1191, 10.1002/cjce.20554 Berglund, 2005, Cellulose-based nanocomposites, 807 Habibi, 2008, Bionanocomposites based on poly(ε-caprolactone)-grafted cellulose nanocrystals by ring-opening polymerization, J Mater Chem, 18, 5002, 10.1039/b809212e Sánchez, 2011, Characterization of carbon nanofiber/epoxy nanocomposites by the nanoindentation technique, Composites Part B, 42, 638, 10.1016/j.compositesb.2011.02.017 Lee, 2007, Characterization of carbon nanotube/nanofiber-reinforced polymer composites using an instrumented indentation technique, Composites Part B, 38, 58, 10.1016/j.compositesb.2006.04.002 Neitzel, 2012, Maximizing Young’s modulus of aminated nanodiamond-epoxy composites measured in compression, Polymer, 53, 5965, 10.1016/j.polymer.2012.10.037 Pakzad, 2012, Elastic properties of thin poly(vinylalcohol)-cellulose nanocrystal membranes, Nanotechnology, 23, 85706, 10.1088/0957-4484/23/8/085706 Lee, 2013, Nanoindentation study of individual cellulose nanowhisker-reinforced PVA electrospun fiber, Polym Bull, 70, 1205, 10.1007/s00289-012-0842-7 Maitra, 2009, Mechanical properties of nanodiamond-reinforced polymer–matrix composites, Sol State Commun, 149, 1693, 10.1016/j.ssc.2009.06.017 Kaboorani, 2012, Nanocrystalline cellulose (NCC): a renewable nano-material for polyvinyl acetate (PVA) adhesive, Eur Polym J, 48, 1829, 10.1016/j.eurpolymj.2012.08.008 Behler, 2009, Nanodiamond-polymer composite fibers and coatings, ACS Nano, 3, 363, 10.1021/nn800445z Stravato, 2008, HVOF-sprayed nylon-11+nanodiamond composite coatings: production & characterization, J Therm Spray Technol, 17, 812, 10.1007/s11666-008-9253-6 Xu, 2012, Electro-responsive polystyrene shape memory polymer nanocomposites, Nanosci Nanotechnol Lett, 4, 814, 10.1166/nnl.2012.1393 Dong, 2012, Cellulose nanocrystals as a reinforcing material for electrospun poly(methylmethacrylate) fibers: Formation, properties and nanomechanical characterization, Carbohydr Polym, 87, 2488, 10.1016/j.carbpol.2011.11.015 Branson, 2011, Fabrication and macro/nanoscale characterization of aggregated and highly de-aggregated nanodiamond/polyacrylonitrile composite thick films, J Mater Chem, 21, 18832, 10.1039/c1jm12817e Mochalin, 2011, Covalent incorporation of aminated nanodiamond into an epoxy polymer network, ACS Nano, 5, 7494, 10.1021/nn2024539 Xu, 2004, Nanomechanic properties of polymer-based nanocomposites with nanosilica by nanoindentation, J Reinf Plast Compos, 23, 1365, 10.1177/0731684404037044 Zou, 2008, Polymer/silica nanocomposites: preparation, characterization, properties, and applications, Chem Rev, 108, 3893, 10.1021/cr068035q Pavlidou, 2008, A review on polymer-layered silicate nanocomposites, Prog Polym Sci, 33, 1119, 10.1016/j.progpolymsci.2008.07.008 Ray, 2003, Polymer/layered silicate nanocomposite: a review from preparation to processing, Prog Polym Sci, 28, 1539, 10.1016/j.progpolymsci.2003.08.002 Alexandre, 2000, Polymer/layered silicate nanocomposite: preparation, properties and uses of a new class of materials, Mater Sci Eng R, 28, 1, 10.1016/S0927-796X(00)00012-7 Kojima, 1993, One-pot synthesis of nylon 6-clay hybrid, J Polym Sci Polym Chem Ed, 31, 1755, 10.1002/pola.1993.080310714 Sánchez, 2005, Applications of hybrid organic-inorganic nanocomposites, J Mater Chem, 28, 3559, 10.1039/b509097k Sánchez, 2011, Applications of advanced hybrid organic-inorganic nanomaterials: from laboratory to market, Chem Soc Rev, 40, 696, 10.1039/c0cs00136h Treece, 2007, Processing of polypropylene-clay nanocomposites: single-screw extrusion with in-line supercritical carbon dioxide feed versus twin-screw extrusion, J Appl Polym Sci, 103, 884, 10.1002/app.25226 Wong, 2006, A study of the global vs local properties for maleic anhydride modified polypropylene nanocomposites, Polymer, 47, 7477, 10.1016/j.polymer.2006.08.049 Martín, 2009, Spectromicroscopy study of intercalation and exfoliation in polypropylene/montmorillonite nanocomposites, J Phys Chem B, 113, 11160, 10.1021/jp9049999 Martín, 2010, Interfacial interactions in PP/MMT/SEBS nanocomposites, Macromolecules, 43, 448, 10.1021/ma901952p Martín, 2011, Interfacial interactions in polypropylene-organoclay-elastomer nanocomposites: influence of polar modifications on the location of the clay, Macromolecules, 44, 2179, 10.1021/ma102707f Shen, 2005, Nanoindentation and morphological studies on injection-molded nylon-6 nanocomposites, Polymer, 46, 11969, 10.1016/j.polymer.2005.10.006 Peng, 2009, Preparation and mechanical properties of exfoliated CoAl layered double hydroxide (LHD)/polyamide 6 nanocomposites by in situ polymerization, Compos Sci Technol, 69, 991, 10.1016/j.compscitech.2009.01.005 Sikdar, 2007, Effect of organic modifiers on dynamic and static nanomechanical properties and crystallinity of intercalated clay-polycaprolactam nanocomposites, J Appl Polym Sci, 105, 790, 10.1002/app.26284 Jarrar, 2012, Alteration of the mechanical and thermal properties of Nylon 6/Nylon 6,6 blends by nanoclay, J Appl Polym Sci, 124, 1880, 10.1002/app.35215 Shen, 2004, Nanoindentation and morphological studies on nylon 66 nanocomposites. I. Effect of clay loading, Polymer, 45, 3341, 10.1016/j.polymer.2004.03.036 Shen, 2004, Nanoindentation and morphological studies on nylon 66 nanocomposites. II. Effect of strain rate, Polymer, 45, 8221, 10.1016/j.polymer.2004.09.062 Shen, 2005, Polishing effect on nanoindentation behavior of nylon 66 and its nanocomposites, Polym Test, 24, 746, 10.1016/j.polymertesting.2005.04.004 Timmaraju, 2011, Influence of imbibed moisture and organoclay on tensile and indentation behavior of polyamide 66/hectorite nanocomposites, Composites Part B, 42, 466, 10.1016/j.compositesb.2010.12.012 Dasari, 2007, Nanoscratching of nylon 66-based ternary nanocomposites, Acta Mater, 55, 635, 10.1016/j.actamat.2006.08.056 Hu, 2006, Nanoindentation studies on nylon 11/clay nanocomposites, Polym Test, 25, 492, 10.1016/j.polymertesting.2006.02.005 Phang, 2005, Morphology, thermal and mechanical properties of nylon 12/organoclay nanocomposites prepared by melt compounding, Polym Int, 54, 456, 10.1002/pi.1721 Aldousiri, 2011, Nanoindentation behavior of layered silicate filled spent polyamide-12 nanocomposites, Polym Test, 30, 688, 10.1016/j.polymertesting.2011.05.008 Zaidi, 2010, Relationship between structure and rheological, mechanical and thermal properties of polylactide/cloisite 30B nanocomposites, J Appl Polym Sci, 116, 1357 Lutpi, 2012, Evaluation of elastic modulus and hardness of polylactic acid-based biocomposite by nano-indentation, Adv Mater Res, 576, 446, 10.4028/www.scientific.net/AMR.576.446 Bruzaud, 2007, Thermal degradation and (nano)mechanical behavior of layered silicate reinforced poly(3-hydroxybutyrate-co-3-hydroxyvalerate) nanocomposites, Polym Test, 26, 652, 10.1016/j.polymertesting.2007.04.001 Adewole, 2012, Bulk and surface mechanical properties of clay modified HDPE used in liner applications, Can J Chem Eng, 90, 1066, 10.1002/cjce.20619 Chua, 2009, Oriented clay-induced anisotropic crystalline morphology in poly(ethylene naphthalate)/clay nanocomposites and its impact on mechanical properties, Composites Part A, 40, 423, 10.1016/j.compositesa.2009.01.005 Beake, 2002, Nanoindentation behavior of clay/poly(ethylene oxide) nanocomposites, J Nanosci Nanotech, 2, 73, 10.1166/jnn.2002.077 Wang, 2010, Electrochemical synthesis and properties of layer-structured polypyrrole/montmorillonite nanocomposite films, J Mater Res, 25, 658, 10.1557/JMR.2010.0093 Khan, 2012, Effect of nano-filler dispersion on the thermal, mechanical and water sorption properties of green environmental polymer, Chin J Polym Sci, 30, 735, 10.1007/s10118-012-1168-5 Remili, 2011, The effects of reprocessing cycles on the structure and properties of polystyrene/cloisite15A nanocomposites, Polym Degrad Stab, 96, 1489, 10.1016/j.polymdegradstab.2011.05.005 Palacio, 2007, Nanomechanical characterization of polymer beam structures for BioMEMS applications, Sens Actuators A, 135, 637, 10.1016/j.sna.2006.09.010 Fan, 2002, Surface structural characterization and mechanical testing by nanoindentation measurements of hybrid polymer/clay nanostructured multilayer films, J Mater Res, 17, 1622, 10.1557/JMR.2002.0240 Katti, 2008, Synthesis and characterization of a novel chitosan/montmorillonite/hydroxyapatite nanocomposite for bone tissue engineering, Biomed Mater, 3, 034122, 10.1088/1748-6041/3/3/034122 Shen, 2006, Nanoindentation and morphological studies of epoxy nanocomposites, Macromol Mater Eng, 291, 1358, 10.1002/mame.200600184 Piscitelli, 2012, Epoxy composites based on amino-silylated MMT: the role of interfaces and clay morphology, J Appl Polym Sci, 124, 616, 10.1002/app.35015 Chen, 2009, Preparation and characterization of polymer–clay nanocomposite films, Sci China Ser B, 52, 2323, 10.1007/s11426-009-0153-5 Lin, 2008, Special assembly of laminated nanocomposite that mimics nacre, Mater Sci Eng C, 28, 1031, 10.1016/j.msec.2007.04.030 Dhakal, 2006, Nanoindentation behavior of layered silicate reinforced unsaturated polyester nanocomposites, Polym Test, 25, 846, 10.1016/j.polymertesting.2006.03.017 Yusoh, 2010, Subsurface mechanical properties of polyurethane/organoclay nanocomposite thin fims studied by nanoindentation, Prog Org Coat, 67, 220, 10.1016/j.porgcoat.2009.10.003 Zaidi, 2013, The effects of gamma irradiation on the morphology and properties of polylactide/cloisite 30B nanocomposites, Polym Degrad Stab, 98, 348, 10.1016/j.polymdegradstab.2012.09.014 Zaidi, 2010, Effect of natural weather on the structure and properties of polylactide/cloisite 30B nanocomposites, Polym Degrad Stab, 95, 1751, 10.1016/j.polymdegradstab.2010.05.014 Seltzer, 2012, Creep behavior of injection moulded polyamide 6/organoclay nanocomposites by nanoindentation and cantilever-bending, Composites Part B, 43, 83, 10.1016/j.compositesb.2011.04.035 Filippone G, Acierno D. Nanoparticle dynamics in polymer melts. In: Hashim A, editor. Nanotechnology and nanomaterials: smart nanoparticles technology; 2012. p. 387–406. [chapter 18] ISBN:978-953-51-0500-8 http://dx.doi.org/10.5772/33647. Mody, 2010, Introduction to metallic nanoparticles, J Pharm Bioall Sci, 2, 282, 10.4103/0975-7406.72127 Li, 2010, Nanocomposites of polymer and inorganic nanoparticles for optical and magnetic applications, Nano Reviews, 1, 5214, 10.3402/nano.v1i0.5214 Rodríguez, 2007, The world of oxide nanoparticles Kango, 2013, Surface modification of inorganic nanoparticles for development of organic-inorganic nanocomposites: a review, Prog Polym Sci, 38, 1232, 10.1016/j.progpolymsci.2013.02.003 Hanemann, 2010, Polymer–nanoparticle composites: from synthesis to modern applications, Materials, 3, 3468, 10.3390/ma3063468 Lam, 2006, Localized elastic modulus distribution of nanoclay/epoxy composites by using nanoindentation, Compos Struct, 75, 553, 10.1016/j.compstruct.2006.04.045 Tzetsis, 2013, Nanoindentation measurements of fumed silica epoxy reinforced nanocomposites, J Reinf Plast Compos, 32, 160, 10.1177/0731684412463978 Allahverdi, 2012, The effect of nanosilica on mechanical, thermal and morphological properties of epoxy coating, Prog Org Coat, 75, 543, 10.1016/j.porgcoat.2012.05.013 Zhang, 2011, Synergetic role of nanoparticles and micro-scale short carbon fibers on the mechanical profiles of epoxy resin, eXPRESS Polym Lett, 5, 859, 10.3144/expresspolymlett.2011.85 Zheng, 2003, Effects of nanoparticle SiO2 on the performance of nanocomposites, Mater Lett, 57, 2940, 10.1016/S0167-577X(02)01401-5 Zhang, 2006, Property improvements of in situ epoxy nanocomposites with reduced interparticle distance at high nanosilica content, Acta Mater, 54, 1833, 10.1016/j.actamat.2005.12.009 Castrillo, 2009, Novel polymer composites based on a mixture of preformed nanosilica-filled poly(methyl methacrylate) particles and a diepoxy/diamine thermoset system, J App Polym Sci, 111, 2062, 10.1002/app.29212 Devaprakasam, 2009, Nanoscale tribology, energy dissipation and failure mechanisms of nano- and micro-silica particle-filled polymer composites, Tribol Lett, 34, 11, 10.1007/s11249-008-9376-4 Soloukhin, 2002, Mechanical properties of silica-(meth)acrylate hybrid coatings on polycarbonate substrate, Polymer, 43, 6169, 10.1016/S0032-3861(02)00542-6 Xu, 2003, Synthesis and characterization of silica nanocomposite in situ photopolymerization, J Appl Polym Sci, 90, 837, 10.1002/app.12650 Molazemhosseini, 2013, Nanoindentation and nanoscratching responses of PEEK based hybrid composites reinforced with short carbon fibers and nano-silica, Polym Test, 32, 525, 10.1016/j.polymertesting.2013.02.001 Stojanovic, 2009, Nanosilica/PMMA composites obtained by the modification of silica nanoparticles in a supercritical carbon dioxide–ethanol mixture, J Mater Sci, 44, 6223, 10.1007/s10853-009-3842-8 Saito, 2005, Effects of hydroxyl groups and architecture of organic polymers on polystyrene/silica nanocomposites, J Appl Polym Sci, 97, 1835, 10.1002/app.21959 Saito, 2008, Effect of solvent composition on transparency and surface hardness of poly(methyl methacrylate)-silica nanocomposites provided on polycarbonate, J Appl Polym Sci, 109, 1498, 10.1002/app.28213 Douce, 2004, Effect of filler size and surface condition of nano-sized silica particles in polysiloxane coatings, Thin Solid Films, 466, 114, 10.1016/j.tsf.2004.03.024 Rodríguez Hernández, 2007, Polymer–silica nanocomposites prepared by sol–gel technique: nanoindentation and tapping mode AFM studies, Eur Polym J, 43, 2775, 10.1016/j.eurpolymj.2007.04.021 Ciprari, 2006, Characterization of polymer nanocomposite interphase and its impact on mechanical properties, Macromolecules, 39, 6565, 10.1021/ma0602270 Gupta, 2011, Covalent grafting of polydimethylsiloxane over surface-modified alumina nanoparticles, Ind Eng Chem Res, 50, 6585, 10.1021/ie200283w Chakraborty, 2013, A study on nanoindentation and tribological behaviour of multifunctional ZnO/PMMA nanocomposite, Mater Lett, 93, 137, 10.1016/j.matlet.2012.11.075 Ramezanzadeh, 2011, Studying the corrosion resistance and hydrolytic degradation of an epoxy coating containing ZnO nanoparticles, Mater Chem Phys, 130, 1208, 10.1016/j.matchemphys.2011.08.065 Hou, 2008, Microstructures and tribological properties of PEEK-based nanocomposite coatings incorporating inorganic fullerene-like nanoparticles, Surf Coat Technol, 202, 2287, 10.1016/j.surfcoat.2007.08.010 Naffakh, 2013, Opportunities and challenges in the use of inorganic fullerene-like nanoparticles to produce advanced polymer nanocomposites, Prog Polym Sci, 38, 1163, 10.1016/j.progpolymsci.2013.04.001 Naffakh, 2007, Influence of inorganic fullerene-like WS2 nanoparticles on the thermal behavior of isotactic polypropylene, J Polym Sci Part B: Polym Phys, 45, 2309, 10.1002/polb.21231 Naffakh, 2009, Use of inorganic fullerene-like WS2 to produce new high-performance polyphenylene sulfide nanocomposites: role of the nanoparticle concentration, J Phys Chem B, 113, 10104, 10.1021/jp902700x Thomas, 2007, Nanostructured biocomposite scaffolds based on collagen coelectrospun with nanohydroxyapatite, Biomacromolecules, 8, 631, 10.1021/bm060879w McCumiskey, 2010, Nanomechanics of CdSe quantum dot-polymer nanocomposite films, Nanotechnology, 21, 225703, 10.1088/0957-4484/21/22/225703 Kiran, 2011, Improved mechanical properties of polymer nanocomposites incorporating graphene-like BN: dependence on the number of BN layers, Script Mater, 64, 592, 10.1016/j.scriptamat.2010.12.007 Tehrani, 2011, Synthesis of WS2 nanostructures from the reaction of WO3 with CS2 and mechanical characterization of WS2 nanotube composites, Nanotechnology, 22, 285714, 10.1088/0957-4484/22/28/285714 Chen, 2009, The effect of AlOOH boehmite nanorods on mechanical property of hybrid composite coatings, Thin Solid Films, 517, 4871, 10.1016/j.tsf.2009.03.097 Pelisser, 2010, Effect of poly(diallyldimethylammonium chloride) on nanostructure and mechanical properties of calcium silicate hydrate, Mater Sci Eng A, 527, 7045, 10.1016/j.msea.2010.07.057 Misra, 2009, POSS-nylon 6 nanocomposites: influence of POSS structure on surface and bulk properties, J Polym Sci B: Polym Phys, 47, 1088, 10.1002/polb.21714 Zeng, 2012, Nanoindentation, nanoscratch, and nanotensile testing of poly(vinylidene fluoride)-polyhedral oligomeric silsesquioxane nanocomposites, J Polym Sci B: Polym Phys, 50, 1597, 10.1002/polb.23159 Wahab, 2008, Synthesis, morphology, and properties of hydroxyl terminated-POSS/polyimide low-k nanocomposite films, J Polym Sci A: Polym Chem, 46, 5887, 10.1002/pola.22906 Huang, 2004, Thermomechanical properties of polyimide-epoxy nanocomposites from cubic silsesquioxane epoxides, J Mater Chem, 14, 2858, 10.1039/b405427j Mammeri, 2006, Elaboration and mechanical characterization of nanocomposites thin films part I: determination of the mechanical properties of thin films prepared by in situ polymerisation of tetraethoxysilane in poly(methyl methacrylate), J Eur Ceram Soc, 26, 259, 10.1016/j.jeurceramsoc.2004.11.013 Mammeri, 2006, Elaboration and mechanical characterization of nanocomposites thin films part II: correlation between structure and mechanical properties of SiO2-PMMA hybrid materials, J Eur Ceram Soc, 26, 267, 10.1016/j.jeurceramsoc.2004.11.014 Yahyaei, 2013, Use of nanoindentation and nanoscratch experiments to reveal the mechanical behavior of sol–gel prepared nanocomposite films on polycarbonate, Tribol Int, 57, 147, 10.1016/j.triboint.2012.08.004 Ngan, 2003, Viscoelastic effects during unloading in depth-sensing indentation, J Mater Res, 18, 1141 Musbah, 2012, Preparation, characterization and mechanical properties of rare-earth-based nanocomposites, J Min Metall B, 48, 309, 10.2298/JMMB120508030M Giró-Paloma, 2013, Depth-sensing indentation applied to polymers: a comparison between standard methods of analysis in relation to the nature of the materials, Eur Poym J, 49, 4047, 10.1016/j.eurpolymj.2013.09.010 Deuschle, 2007, Surface detection in nanoindentation of soft polymers, J Mater Res, 22, 3107, 10.1557/JMR.2007.0394 Piccarolo, 2010, Improving surface detection on nanoindentation of compliant materials, Meas Sci Technol, 21, 065701, 10.1088/0957-0233/21/6/065701 Nili, 2013, In situ nanoindentation: probing nanoscale multifunctionality, Prog Mat Sci, 58, 1, 10.1016/j.pmatsci.2012.08.001 Hayes, 2004, Dynamic nanoindentation as a tool for the examination of polymeric materials, J Mater Res, 19, 3298, 10.1557/JMR.2004.0437 Rhim, 2013, Bio-nanocomposites for food packaging applications, Prog Polym Sci, 38, 1629, 10.1016/j.progpolymsci.2013.05.008 Ebenstein, 2006, Nanoindentation of biological materials, Nanotoday, 1, 26, 10.1016/S1748-0132(06)70077-9 Shepherd, 2011, Direct comparison of nanoindentation and macroscopic measurements of bone viscoelasticity, J Mech Behavior Biomed Mater, 4, 2055, 10.1016/j.jmbbm.2011.07.004 Zysset, 2009, Indentation of bone tissue: a short review, Osteoporos Int, 20, 1049, 10.1007/s00198-009-0854-9 McKee, 2011, Indentation versus tensile measurements of Young’s modulus for soft biological tissues, Tissue Eng B, 17, 155, 10.1089/ten.teb.2010.0520 Tang, 2012, A rate-jump method for characterization of soft tissues using nanoindentation techniques, Soft Matter, 8, 5974, 10.1039/c2sm25227a Balooch, 2008, Mechanical properties of mineralized collagen fibrils as influenced by demineralization, J Struct Biol, 162, 404, 10.1016/j.jsb.2008.02.010 Notbohm, 2012, Analysis of nanoindentation of soft materials with an atomic force microscope, J Mater Res, 27, 229, 10.1557/jmr.2011.252 Ren, 2013, Indentation quantification for in-liquid nanomechanical measurement of soft material using an atomic force microscope: rate-dependent elastic modulus of live cells, Phys Rev E, 88, 052711, 10.1103/PhysRevE.88.052711 Crick, 2007, Assessing micromechanical properties of cells with atomic force microscopy: importance of the contact point, Biomechan Model Mechanobiol, 6, 199, 10.1007/s10237-006-0046-x Constantinides, 2008, Probing mechanical properties of fully hydrated gels and biological tissues, J Biomech, 41, 3285, 10.1016/j.jbiomech.2008.08.015 Ebenstein, 2004, Nanoindentation of soft hydrated materials for application to vascular tissues, J Biomed Mater Res A, 69, 222, 10.1002/jbm.a.20096 Ngan, 2009, Response of power-law-viscoelastic and time-dependent materials to rate jumps, J Mater Res, 24, 853, 10.1557/jmr.2009.0111