Nanobiolubricant grinding: a comprehensive review

Krolczyk GM, Maruda RW, Krolczyk JB et al (2019) Ecological trends in machining as a key factor in sustainable production–a review. J Clean Prod 218:601–615 Tripathi V, Chattopadhyaya S, Mukhopadhyay AK et al (2022) A sustainable methodology using lean and smart manufacturing for the cleaner production of shop floor management in Industry 4.0. Mathematics 10(3):347. https://doi.org/10.3390/math10030347 Jha K, Tyagi YK, Kumar R et al (2021) Assessment of dimensional stability, biodegradability, and fracture energy of bio-composites reinforced with novel pine cone. Polymers 13(19):3260. https://doi.org/10.3390/math10030347 Kim JH, Kim EJ, Lee CM (2020) A study on the heat affected zone and machining characteristics of difficult-to-cut materials in laser and induction assisted machining. J Manuf Process 57:499–508 Pervaiz S, Ahmad N, Ishfaq K et al (2022) Implementation of sustainable vegetable-oil-based minimum quantity cooling lubrication (MQCL) machining of titanium alloy with coated tools. Lubricants 10(10):235. https://doi.org/10.3390/polym13193260 Setti D, Arrabiyeh PA, Kirsch B et al (2020) Analytical and experimental investigations on the mechanisms of surface generation in micro grinding. Int J Mach Tool Manu 149:103489. https://doi.org/10.1016/j.ijmachtools.2019.103489 Yu H, Zhang W, Zhang S et al (2022) Optimization of hydrodynamic properties of structured grinding wheels based on combinatorial bionics. Tribol Int 173:107651. https://doi.org/10.1016/j.triboint.2022.107651 Wu X, Li C, Zhou Z et al (2021) Circulating purification of cutting fluid: an overview. Int J Adv Manuf Tech 117(9/10):2565–2600 Leiden A, Arafat R, Callegari M et al (2023) Development and testing of novel mineral oil-and biocide-free glycerol-and propanediol-based fluids for drilling and tapping aluminium alloys. Int J Adv Manuf Tech 126(5/6):2323–2336 Sharma AK, Tiwari AK, Dixit AR (2016) Effects of minimum quantity lubrication (MQL) in machining processes using conventional and nanofluid based cutting fluids: a comprehensive review. J Clean Prod 127:1–18 Ghosh S, Rao PV (2015) Application of sustainable techniques in metal cutting for enhanced machinability: a review. J Clean Prod 100:17–34 Sharma J, Sidhu BS (2014) Investigation of effects of dry and near dry machining on AISI D2 steel using vegetable oil. J Clean Prod 66:619–623 Ding WF, Zhu YJ, Zhang LC et al (2015) Stress characteristics and fracture wear of brazed CBN grains in monolayer grinding wheels. Wear 332:800–809 M’Saoubi R, Axinte D, Soo SL et al (2015) High performance cutting of advanced aerospace alloys and composite materials. CIRP Ann 64(2):557–580 Barczak L, Batako A, Morgan M (2010) A study of plane surface grinding under minimum quantity lubrication (MQL) conditions. Int J Mach Tool Manu 50(11):977–985 Hamran NN, Ghani J, Ramli R et al (2020) A review on recent development of minimum quantity lubrication for sustainable machining. J Clean Prod 268:122165. https://doi.org/10.1016/j.jclepro.2020.122165 Makhesana M, Patel K, Mawandiya B (2021) Environmentally conscious machining of Inconel 718 with solid lubricant assisted minimum quantity lubrication. Met Powder Rep 76:S24–S29 Zhou S, Wang D, Wu S et al (2023) Minimum quantity lubrication machining nickel base alloy: a comprehensive review. Int J Adv Manuf Tech. https://doi.org/10.1007/s00170-023-11721-6 Sen B, Mia M, Krolczyk GM et al (2021) Eco-friendly cutting fluids in minimum quantity lubrication assisted machining: a review on the perception of sustainable manufacturing. Int J Pr Eng Man-Gt 8:249–280 Abellan-Nebot JV, Rogero MO (2019) Sustainable machining of molds for tile industry by minimum quantity lubrication. J Clean Pro 240:118082. https://doi.org/10.1016/j.jclepro.2019.118082 Hadad MJ, Tawakoli T, Sadeghi MH et al (2012) Temperature and energy partition in minimum quantity lubrication-MQL grinding process. Int J Mach Tool Manu 54:10–17 Ghosh S, Rao P (2018) Specific cutting energy modeling for turning nickel-based nimonic 90 alloy under MQL condition. Int J Mech Sci 146:25–38 de Souza RR, de Paiva RL, Gelamo RV et al (2021) Study on grinding of Inconel 625 and 718 alloys with cutting fluid enriched with multilayer graphene platelets. Wear 476:203697. https://doi.org/10.1016/j.wear.2021.203697 Khanna N, Airao J, Nirala CK et al (2022) Novel sustainable cryo-lubrication strategies for reducing tool wear during ultrasonic-assisted turning of Inconel 718. Tribol Int 174:107728. https://doi.org/10.1016/j.triboint.2022.107728 Liu M, Li C, Yang M et al (2023) Mechanism and enhanced grindability of cryogenic air combined with biolubricant grinding titanium alloy. Tribol Int 187:108704. https://doi.org/10.1016/j.triboint.2023.108704 Arafat R, Madanchi N, Thiede S et al (2021) Supercritical carbon dioxide and minimum quantity lubrication in pendular surface grinding–a feasibility study. J Clean Prod 296:126560. https://doi.org/10.1016/j.est.2022.104906 Ali Khan M, Jaffery SHI, Khan M et al (2019) Statistical analysis of energy consumption, tool wear and surface roughness in machining of titanium alloy (Ti-6Al-4V) under dry, wet and cryogenic conditions. Mech Sci 10(2):561–573 Anqi AE, Li C, Dhahad HA et al (2022) Effect of combined air cooling and nano enhanced phase change materials on thermal management of lithium-ion batteries. J Energy Storage 52:104906. https://doi.org/10.1016/j.est.2022.104906 Liu M, Li C, Zhang Y et al (2023) Analysis of grain tribology and improved grinding temperature model based on discrete heat source. Tribol Int 180:108196. https://doi.org/10.1016/j.triboint.2022.108196 Gupta MK, Sood PK, Sharma VS (2016) Retraction notice to: optimization of machining parameters and cutting fluids during nano-fluid based minimum quantity lubrication turning of titanium alloy by using evolutionary techniques. J Clean Prod 135:1276–1288 Xu W, Li C, Zhang Y et al (2022) Electrostatic atomization minimum quantity lubrication machining: from mechanism to application. Int J Extreme Manuf 4(4):042003. https://doi.org/10.1088/2631-7990/ac9652 Alawi OA, Sidik NAC, Xian HW et al (2018) Thermal conductivity and viscosity models of metallic oxides nanofluids. Int J Heat Mass Tran 116:1314–1325 Yalçın G, Öztuna S, Dalkılıç AS et al (2022) Measurement of thermal conductivity and viscosity of ZnO-SiO2 hybrid nanofluids. J Therm Anal Calorim 147:8243–8259 Fayaz U, Manzoor S, Dar AH et al (2023) Advances of nanofluid in food processing: preparation, thermophysical properties, and applications. Food Res Int 170:112954. https://doi.org/10.1016/j.foodres.2023.112954 Chinchanikar S, Kore SS, Hujare P (2021) A review on nanofluids in minimum quantity lubrication machining. J Manuf Process 68:56–70 Hegab H, Kishawy HA (2018) Towards sustainable machining of Inconel 718 using nano-fluid minimum quantity lubrication. J Manuf Mater Proc 2(3):50. https://doi.org/10.3390/jmmp2030050 Said Z, Gupta M, Hegab H et al (2019) A comprehensive review on minimum quantity lubrication (MQL) in machining processes using nano-cutting fluids. Int J Adv Manuf Tech 105:2057–2086 Bai X, Jiang J, Li C et al (2023) Tribological performance of different concentrations of Al2O3 nanofluids on minimum quantity lubrication milling. Chin J Mech Eng-En 36(1):1–12 Dambatta YS, Sayuti M, Sarhan AA et al (2019) Tribological performance of SiO2-based nanofluids in minimum quantity lubrication grinding of Si3N4 ceramic. J Manuf Process 41:135–147 Jiang L, Wang D (2019) Finite-element-analysis of the effect of different wiper tool edge geometries during the hard turning of AISI 4340 steel. Simul Model Pract Theory 94:250–263 Tang LZ, Zhang YB, Li CH et al (2022) Biological stability of water-based cutting fluids: progress and application. Chin J Mech Eng-En 35(1):3–27 Mao C, Zhang J, Huang Y et al (2013) Investigation on the effect of nanofluid parameters on MQL grinding. J Manuf Process 28(4):436–442 Najiha MS, Rahman MM, Yusoff AR (2016) Environmental impacts and hazards associated with metal working fluids and recent advances in the sustainable systems: a review. Renew Sust Energ Rev 60:1008–1031 Zhang Y, Li HN, Li CH et al (2022) Nano-enhanced biolubricant in sustainable manufacturing: from processability to mechanisms. Friction 10(6):803–841 Bagherzadeh A, Kuram E, Budak E (2021) Experimental evaluation of eco-friendly hybrid cooling methods in slot milling of titanium alloy. J Clean Prod 289:125817. https://doi.org/10.1016/j.jclepro.2021.125817 Ruggiero A, D’Amato R, Merola M et al (2017) Tribological characterization of vegetal lubricants: comparative experimental investigation on Jatropha curcas L. oil, rapeseed methyl ester oil, hydrotreated rapeseed oil. Tribol Int 109:529–540 Rozga P, Beroual A, Przybylek P et al (2020) A review on synthetic ester liquids for transformer applications. Energies 13(23):6429. https://doi.org/10.3390/en13236429 Taha-Tijerina J, Ribeiro H, Aviña K et al (2020) Thermal conductivity performance of 2D h-BN/MoS2/-hybrid nanostructures used on natural and synthetic esters. Nanomaterials 10(6):1160. https://doi.org/10.3390/nano10061160 Gryglewicz S, Piechocki W, Gryglewicz G (2003) Preparation of polyol esters based on vegetable and animal fats. Bioresource Technol 87(1):35–39 Dodos GS, Karonis D, Zannikos F et al (2015) Renewable fuels and lubricants from Lunaria annua L. Ind Crop Prod 75:43–50 Wang B, Tao Dh (2005) Rheological and tribological characteristics of the synthesized lubricants derived from vegetable oils. J Shanghai Univ (Eng Ed) 9:462–465 Wang Y, Li C, Zhang Y et al (2016) Experimental evaluation of the lubrication properties of the wheel/workpiece interface in MQL grinding with different nanofluids. Tribol Int 99:198–210 Soltani ME, Shams K, Akbarzadeh S et al (2020) A comparative investigation on the tribological performance and physicochemical properties of biolubricants of various sources, a petroleum-based lubricant, and blends of the petroleum-based lubricant and crambe oil. Tribol Int 63(6):1121–1134 Talib N, Rahim EA (2018) Experimental evaluation of physicochemical properties and tapping torque of hexagonal boron nitride in modified jatropha oils-based as sustainable metalworking fluids. J Clean Prod 171:743–755 Padmini R, Krishna PV, Rao GKM (2016) Effectiveness of vegetable oil based nanofluids as potential cutting fluids in turning AISI 1040 steel. Tribol Int 94:490–501 Zhang YB, Li CH, Jia DZ et al (2015) Experimental evaluation of MoS2 nanoparticles in jet MQL grinding with different types of vegetable oil as base oil. J Clean Prod 87:930–940 Yin QG, Li CH, Dong L et al (2021) Effects of physicochemical properties of different base oils on friction coefficient and surface roughness in MQL milling AISI 1045. Int J Pr Eng Man-Gt 8(6):1629–1647 Borda FLG, de Oliveira SJR, Lazaro L et al (2018) Experimental investigation of the tribological behavior of lubricants with additive containing copper nanoparticles. Tribol Int 117:52–58 Erhan SZ, Sharma BK, Perez JM (2006) Oxidation and low temperature stability of vegetable oil-based lubricants. Ind Crop Prod 24(3):292–299 Yang M, Li C, Zhang Y et al (2018) A new model for predicting neurosurgery skull bone grinding temperature field. J Mech Eng 54(23):215–222 Quinchia LA, Delgado MA, Franco JM et al (2012) Low-temperature flow behaviour of vegetable oil-based lubricants. Ind Crop Prod 3(1):383–388 Bahari A, Lewis R, Slatter T (2018) Friction and wear phenomena of vegetable oil-based lubricants with additives at severe sliding wear conditions. Tribol Int 61(2):207–219 Zhang YB, Li CH, Jia DZ et al (2016) Experimental study on the effect of nanoparticle concentration on the lubricating property of nanofluids for MQL grinding of Ni-based alloy. J Mater Process Tech 232:100–115 Sajeeb A, Rajendrakumar PK (2019) Comparative evaluation of lubricant properties of biodegradable blend of coconut and mustard oil. J Clean Prod 240:118255. https://doi.org/10.1016/j.jclepro.2019.118255 Jia DZ, Li CH, Zhang YB et al (2017) Performance evaluation of grinding ductile iron under nanofluids minimum quantity lubrication. Int J Mach Tool Manu 12:40–43 Ozcelik B, Kuram E, Cetin MH et al (2011) Experimental investigations of vegetable based cutting fluids with extreme pressure during turning of AISI 304L. Tribol Int 44(12):1864–1871 Sani ASA, Abd Rahim E, Sharif S et al (2019) Machining performance of vegetable oil with phosphonium- and ammonium-based ionic liquids via MQL technique. J Clean Prod 209:947–964 Pal A, Chatha SS, Singh K (2020) Performance evaluation of minimum quantity lubrication technique in grinding of AISI 202 stainless steel using nano-MoS(2)with vegetable-based cutting fluid. Int J Adv Manuf Tech 110(1/2):125–137 Shahnazar S, Bagheri S, Abd Hamid SB (2016) Enhancing lubricant properties by nanoparticle additives. Int J Hydrogen Energ 41(4):3153–3170 Soares JW, Whitten JE, Oblas DW et al (2008) Novel photoluminescence properties of surface-modified nanocrystalline zinc oxide: toward a reactive scaffold. Langmuir 24(2):371–374 Tang E, Cheng G, Ma X et al (2006) Surface modification of zinc oxide nanoparticle by PMAA and its dispersion in aqueous system. Appl Surf Sci 252(14):5227–5232 Köhn C, Arafat R, Jean-Fulcrand A et al (2022) Surface interactions of SiO2-nanofluids with 100Cr6-steel during machining. Procedia CIRP 108:13–18 Arafat R, Köhn C, Jean-Fulcrand A et al (2023) Physical-chemical properties and tribological characterization of water-glycerine based metal oxide nanofluids. J Mater Res Technol 25:2112–2126 Cui X, Li CH, Ding WF et al (2022) Minimum quantity lubrication machining of aeronautical materials using carbon group nanolubricant: from mechanisms to application. Chin J Aeronaut 35(11):85–112 Bai MJ, Liu JL, He J et al (2020) Heat transfer and mechanical friction reduction properties of graphene oxide nanofluids. Diam Relat Mater 108:107982. https://doi.org/10.1016/j.diamond.2020.107982 Padgurskas J, Rukuiza R, Prosycevas I et al (2013) Tribological properties of lubricant additives of Fe, Cu and Co nanoparticles. Tribol Int 60:224–232 Jamil M, Khan AM, Hegab H et al (2019) Effects of hybrid Al2O3-CNT nanofluids and cryogenic cooling on machining of Ti-6Al-4V. Int J Adv Manuf Tech 102:3895–3909 Souza RR, Faustino V, Goncalves IM et al (2022) A review of the advances and challenges in measuring the thermal conductivity of nanofluids. Nanomaterials 12(15):2526. https://doi.org/10.3390/nano12152526 Ali HM, Babar H, Shah TR et al (2018) Preparation techniques of TiO2 nanofluids and challenges: a review. Appl Sci-Basel 8(4):587–617 Sandhya SU, Nityananda SA (2013) A facile one step solution route to synthesize cuprous oxide nanofluid. Nanomater Nanotechno 3:5–12 Yucel A, Yildirim CV, Sarikaya M et al (2021) Influence of MoS2 based nanofluid-MQL on tribological and machining characteristics in turning of AA 2024 T3 aluminum alloy. J Mater Res Technol 15:1688–1704 Bakthavatchalam B, Habib K, Saidur R et al (2020) Comprehensive study on nanofluid and ionanofluid for heat transfer enhancement: a review on current and future perspective. J Mol Liq 305:112787. https://doi.org/10.1016/j.molliq.2020.112787 Sidik NAC, Mohammed HA, Alawi OA et al (2014) A review on preparation methods and challenges of nanofluids. Int Commun Heat Mass 54:115–125 Duan ZJ, Yin QG, Li CH et al (2020) Milling force and surface morphology of 45 steel under different Al2O3 nanofluid concentrations. Int J Adv Manuf Tech 107(3/4):1277–1296 Gupta M, Singh V, Kumar S et al (2018) Up to date review on the synthesis and thermophysical properties of hybrid nanofluids. J Clean Prod 190:169–192 Huang BT, Li CH, Zhang YB et al (2021) Advances in fabrication of ceramic corundum abrasives based on sol-gel process. Chin J Aeronaut 34(6):1–17 Kim HJ, Bang IC, Onoe J (2009) Characteristic stability of bare Au-water nanofluids fabricated by pulsed laser ablation in liquids. Opt Laser Eng 47(5):532–538 Sidik NAC, Jamil MM, Japar W et al (2017) A review on preparation methods, stability and applications of hybrid nanofluids. Renew Sust Energ Rev 80:1112–1122 Vignesh S, Iqbal UM (2022) Preparation and characterization of bio-based nano cutting fluids for tribological applications. J Disper Sci Technol 44(9):1725–1737 Li X, Zhu D, Wang X (2007) Evaluation on dispersion behavior of the aqueous copper nano-suspensions. J Colloid Interf Sci 310(2):456–463 Navarrete N, Nithiyanantham U, Hernandez L et al (2022) K2CO3-Li2CO3 molten carbonate mixtures and their nanofluids for thermal energy storage: an overview of the literature. Sol Energ Mat Sol C 236:111525. https://doi.org/10.1016/j.solmat.2021.111525 Sharif MZ, Azmi WH, Ghazali MF et al (2023) Numerical and thermo-energy analysis of cycling in automotive air-conditioning operating with hybrid nanolubricants and R1234yf. Numer Heat Tr A-Appl 83(9):935–957 Kalita P, Malshe AP, Rajurkar KP (2012) Study of tribo-chemical lubricant film formation during application of nanolubricants in minimum quantity lubrication (MQL) grinding. CIRP Ann 61(1):327–330 Sadeghi R, Etemad SG, Keshavarzi E et al (2015) Investigation of alumina nanofluid stability by UV-vis spectrum. Microfluid Nanofluid 18(5–6):1023–1030 Izadi N, Koochi MM, Amrollahi A (2019) Investigation of functionalized polyelectrolyte polymer-coated Fe3O4 nanoparticles stabilized in high salinity brine at high temperatures as an EOR agent. J Petrol Sci Eng 178:1079–1091 Yang CD, Feng JM, Liu ZQ et al (2023) Lubricant-entrenched slippery surface-based nanocarriers to avoid macrophage uptake and improve drug utilization. J Adv Res 48:61–74 Kole M, Khandekar S (2021) Engineering applications of ferrofluids: a review. J Magn Magn Mater 537:1168222. https://doi.org/10.1016/j.jmmm.2021.168222 Song YY, Bhadeshia H, Suh DW (2015) Stability of stainless-steel nanoparticle and water mixtures. Powder Technol 272:34–44 Aydin DY, Ciftci E, Guru M et al (2021) The impacts of nanoparticle concentration and surfactant type on thermal performance of a thermosyphon heat pipe working with bauxite nanofluid. Energ Source Part A 43(12):1524–1548 Mao C, Zou HF, Zhou X et al (2014) Analysis of suspension stability for nanofluid applied in minimum quantity lubricant grinding. Int J Adv Manuf Tech 71(9/12):2073–2081 Gao T, Li CH, Zhang YB et al (2019) Dispersing mechanism and tribological performance of vegetable oil-based CNT nanofluids with different surfactants. Tribol Int 131:51–63 Zhou MZ, Xia GD, Li J et al (2012) Analysis of factors influencing thermal conductivity and viscosity in different kinds of surfactant solutions. Exp Therm Fluid Sci 36:22–29 Khairul MA, Shah K, Doroodchi E et al (2016) Effects of surfactant on stability and thermo-physical properties of metal oxide nanofluids. Int J Heat Mass Tran 98:778–787 Cacua K, Ordonez F, Zapata C et al (2019) Surfactant concentration and pH effects on the zeta potential values of alumina nanofluids to inspect stability. Colloid Surface A 583:123960. https://doi.org/10.1016/j.colsurfa.2019.123960 Ghadimi A, Metselaar IH (2013) The influence of surfactant and ultrasonic processing on improvement of stability, thermal conductivity and viscosity of titania nanofluid. Exp Therm Fluid Sci 51:1–9 Jain S, Dongave SM, Date T et al (2019) Succinylated β-lactoglobuline-functionalized multiwalled carbon nanotubes with improved colloidal stability and biocompatibility. ACS Biomater Sci Eng 5(7):3361–3372 Chakraborty S, Sengupta I, Sarkar I et al (2019) Effect of surfactant on thermo-physical properties and spray cooling heat transfer performance of Cu-Zn-Al LDH nanofluid. Appl Clay Sci 168:43–55 Wang J, Li GL, Li T et al (2021) Effect of various surfactants on stability and thermophysical properties of nanofluids. J Therm Anal Calorim 143(6):4057–4070 Amrita M, Kamesh B, Srikant RR et al (2019) Thermal enhancement of graphene dispersed emulsifier cutting fluid with different surfactants. Mater Res Express 6(12):125030. https://doi.org/10.1088/2053-1591/ab5517 Wang BG, Wang XB, Lou WJ et al (2012) Thermal conductivity and rheological properties of graphite/oil nanofluids. Colloid Surface A 414:125–131 Saeedinia M, Akhavan-Behabadi MA, Razi P (2012) Thermal and rheological characteristics of CuO-base oil nanofluid flow inside a circular tube. Int Commun Heat Mass 39(1):152–159 Sandhya M, Ramasamy D, Sudhakar K et al (2021) A systematic review on graphene-based nanofluids application in renewable energy systems: preparation, characterization, and thermophysical properties. Sustain Energy Techn 44:101058. https://doi.org/10.1016/j.seta.2021.101058 Sen S, Moazzen E, Acuna S et al (2022) Nickel hydroxide nanofluid cathodes with high solid loadings and low viscosity for energy storage applications. Energies 15(13):4728. https://doi.org/10.3390/en15134728 Jeong J, Li C, Kwon Y et al (2013) Particle shape effect on the viscosity and thermal conductivity of ZnO nanofluids. Int J Refrig 36(8):2233–2241 Mashaei PR, Taheri-Ghazvini M, Moghadam RS et al (2017) Smart role of Al2O3-water suspension on laminar heat transfer in entrance region of a channel with transverse in-line baffles. Appl Therm Eng 112:450–463 Hamid KA, Azmi WH, Nabil MF et al (2018) Experimental investigation of thermal conductivity and dynamic viscosity on nanoparticle mixture ratios of TiO2-SiO2 nanofluids. Int J Heat Mass Tran 116:1143–1152 Talib N, Sasahara H, Rahim EA (2017) Evaluation of modified jatropha-based oil with hexagonal boron nitride particle as a biolubricant in orthogonal cutting process. Int J Adv Manuf Tech 92(1/4):371–391 Yang M, Li CH, Zhang YB et al (2018) Microscale bone grinding temperature by dynamic heat flux in nanoparticle jet mist cooling with different particle sizes. Mater Manuf Process 33(1):58–68 Maheshwary PB, Handa CC, Nernade KR (2017) A comprehensive study of effect of concentration, particle size and particle shape on thermal conductivity of titania/water based nanofluid. Appl Therm Eng 119:79–88 Sun CZ, Bai BF, Lu WQ et al (2013) Shear-rate dependent effective thermal conductivity of H2O+SiO2 nanofluids. Phys Fluids 25(5):052002. https://doi.org/10.1063/1.4802049 Duangthongsuk W, Wongwises S (2013) Comparison of the heat transfer performance and friction characteristics between fixed and rotating turbine-type swirl generators fitted in a small circular tube. Exp Therm Fluid Sci 50:222–228 Makhesana MA, Patel KM, Khanna N (2022) Analysis of vegetable oil-based nano-lubricant technique for improving machinability of Inconel 690. J Manuf Process 77:708–721 Sahooli M, Rahimpour MR, Khorram M (2017) Fine-tuning synthesis and characterization of mono-sized H-beta zeolite-supported palladium-iridium nanoparticles and application in the selective hydrogenation of acetylene. Catalysts 7(11):343–374 Li BK, Li CH, Zhang YB et al (2017) Heat transfer performance of MQL grinding with different nanofluids for Ni-based alloys using vegetable oil. J Clean Prod 154:1–11 Sezer N, Atieh MA, Koc M (2019) A comprehensive review on synthesis, stability, thermophysical properties, and characterization of nanofluids. Powder Technol 344:404–431 Sharma AK, Tiwari AK, Dixit AR (2016) Effects of minimum quantity lubrication (MQL) in machining processes using conventional and nanofluid based cutting fluids: a comprehensive review. J Manuf Process 127:1–18 Talib N, Nasir RM, Rahim EA (2017) Tribological behaviour of modified jatropha oil by mixing hexagonal boron nitride nanoparticles as a bio-based lubricant for machining processes. J Clean Prod 147:360–378 Yang M, Kong M, Li C et al (2023) Temperature field model in surface grinding: a comparative assessment. Int J Extrem Manuf 5:042011. https://doi.org/10.1088/2631-7990/acf4d4 Soltani O, Akbari M (2016) Effects of temperature and particles concentration on the dynamic viscosity of MgO-MWCNT/ethylene glycol hybrid nanofluid: experimental study. Physica E 84:564–570 Lee PH, Kim JW, Lee SW (2018) Experimental characterization on eco-friendly micro-grinding process of titanium alloy using air flow assisted electrospray lubrication with nanofluid. J Clean Prod 201:452–462 Asadi A, Pourfattah F (2019) Heat transfer performance of two oil-based nanofluids containing ZnO and MgO nanoparticles; a comparative experimental investigation. Powder Technol 343:296–308 Esfe MH, Alidoust S, Esfandeh S et al (2023) Theoretical-experimental study of factors affecting the thermal conductivity of SWCNT-CuO (25:75)/water nanofluid and challenging comparison with CuO nanofluids/water. Arab J Chem 16(5):104689. https://doi.org/10.1016/j.arabjc.2023.104689 Bertolini R, Ghiotti A, Bruschi S (2021) Graphene nanoplatelets as additives to MQL for improving tool life in machining Inconel 718 alloy. Wear 476:203656. https://doi.org/10.1016/j.wear.2021.203656 Nair V, Parekh AD, Tailor PR (2019) Experimental investigation of thermophysical properties of R718 based nanofluids at low temperatures. Heat Mass Transfer 55(10):2769–2784 Ganeshkumar J, Kathirkaman D, Raja K et al (2017) Experimental study on density, thermal conductivity, specific heat, and viscosity of water-ethylene glycol mixture dispersed with carbon nanotubes. Therm Sci 21(1):255–265 Riazi H, Murphy T, Webber GB et al (2016) Specific heat control of nanofluids: a critical review. Int J Therm Sci 107:25–38 Pranesh V, Velraj R, Kumaresan V (2023) Experimental investigations on a sensible heat thermal energy storage system towards the design of cascaded latent heat storage system. Int J Adv Manuf Tech 20(1):63–76 Dambatta Y, Li C, Yang M et al (2023) Grinding with minimum quantity lubrication: a comparative assessment. Int J Adv Manuf Tech 128:955–1014 Cui X, Li C, Yang M et al (2023) Enhanced grindability and mechanism in the magnetic traction nanolubricant grinding of Ti-6Al-4V. Tribol Int 186:108603. https://doi.org/10.1016/j.triboint.2023.108603 Das A, Patel SK, Arakha M et al (2021) Processing of hardened steel by MQL technique using nano cutting fluids. Mater Manuf Process 36(3):316–328 Yildirim CV, Sarikaya M, Kivak T et al (2019) The effect of addition of hBN nanoparticles to nanofluid-MQL on tool wear patterns, tool life, roughness and temperature in turning of Ni-based Inconel 625. Tribol Int 134:443–456 Agarwal DK, Vaidyanathan A, Kumar SS (2016) Experimental investigation on thermal performance of kerosene-graphene nanofluid. Exp Therm Fluid Sci 71:126–137 Gao T, Li CH, Yang M et al (2021) Mechanics analysis and predictive force models for the single-diamond grain grinding of carbon fiber reinforced polymers using CNT nano-lubricant. J Mater Process Tech 290:116976. https://doi.org/10.1016/j.jmatprotec.2020.116976 Pal A, Chatha SS, Sidhu HS (2022) Assessing the lubrication performance of various vegetable oil-based nano-cutting fluids via eco-friendly MQL technique in drilling of AISI 321 stainless steel. J Braz Soc Mech Sci 44(4):148–174 Kong LH, Sun JL, Bao YY (2017) Preparation, characterization and tribological mechanism of nanofluids. RSC Adv 7(21):12599–12609 Aljuwayhel NF, Ali N, Ebrahim SA et al (2023) Experimental investigation of thermophysical properties, tribological properties and dispersion stability of nanodiamond-based nanolubricant for air conditioning systems. Int J Refrig 145:325–337 Wu LL, Zhang YJ, Yang GB et al (2016) Tribological properties of oleic acid-modified zinc oxide nanoparticles as the lubricant additive in poly-alpha olefin and diisooctyl sebacate base oils. RSC Adv 6(74):69836–69844 Wu WT, Li CH, Yang M et al (2019) Specific energy and G ratio of grinding cemented carbide under different cooling and lubrication conditions. Int J Adv Manuf Tech 105(1/4):67–82 Kumar R, Sahoo AK, Mishra PC et al (2020) Influence of Al2O3 and TiO2 nanofluid on hard turning performance. Int J Adv Manuf Tech 106(5/6):2265–2280 Kong LH, Zhang L, Bao YY et al (2022) Effect of surface roughness and particle size on lubrication mechanisms of SiO2 nanoparticles. Adv Mater Sci Eng 2022:7051650. https://doi.org/10.1155/2022/7051650 Zhanga WY, Bapat S, Malshe AP et al (2017) Understanding evolution of tribo-chemical interfaces during boundary lubrication in manufacturing. CIRP Ann-Manuf Techn 66(1):555–558 Fan XQ, Li W, Fu HM et al (2017) Probing the function of solid nanoparticle structure under boundary lubrication. ACS Sustain Chem Eng 5(5):4223–4233 Mao C, Huang Y, Zhou X et al (2014) The tribological properties of nanofluid used in minimum quantity lubrication grinding. Int J Adv Manuf Tech 71(5/8):1221–1228 Kursus M, Liew PJ, Sidik NAC et al (2022) Recent progress on the application of nanofluids and hybrid nanofluids in machining: a comprehensive review. Int J Adv Manuf Tech 121(3/4):1455–1481 Virdi RL, Chatha SS, Singh H et al (2021) Experimental investigations on the tribological and lubrication behaviour of minimum quantity lubrication technique in grinding of Inconel 718 alloy. Tribol Int 153:106581. https://doi.org/10.1016/j.triboint.2020.106581 Hu Z, Shao M, Fang C et al (2017) Study on characteristics of axial ultrasonic assisted grinding of sapphire with differernt crystal surface. Chin Mech Eng-En 28(11):1380–1385 Setti D, Sinha MK, Ghosh S et al (2015) Performance evaluation of Ti-6Al-4V grinding using chip formation and coefficient of friction under the influence of nanofluids. Int J Mach Tools Manu 88:237–248 Li L, Zhang Y, Cui X et al (2023) Mechanical behavior and modeling of grinding force: a comparative analysis. J Manuf Process 102:921–954 Wu W, Li C, Yang M et al (2019) Specific energy and G ratio of grinding cemented carbide under different cooling and lubrication conditions. Int J Adv Manuf Tech 105:67–82 Singh H, Sharma VS, Dogra M (2020) Exploration of graphene assisted vegetables oil based minimum quantity lubrication for surface grinding of Ti-6Al-4V-ELI. Tribol Int 144:106113. https://doi.org/10.1016/j.triboint.2019.106113 Pal A, Chatha SS, Singh K (2020) Performance evaluation of minimum quantity lubrication technique in grinding of AISI 202 stainless steel using nano-MoS2 with vegetable-based cutting fluid. Int J Adv Manuf Tech 110:125–137 Arrabiyeh PA, Setti D, Basten S et al (2019) Micro grinding 16MnCr5 hardened steel using micro pencil grinding tools with diameters similar to 50 mu m. CIRP J Manuf Sci Tec 27:1–10 Svahn F, Csillag S (2011) Formation of low-friction particle/polymer composite tribofilms by tribopolymerization. Tribol Lett 41(2):387–393 Su Y, Tang ZC, Wang GC et al (2018) Influence of carbon nanotube on the tribological properties of vegetable-based oil. Adv Mech Eng. https://doi.org/10.1177/1687814018778188 Ghaednia H, Jackson RL, Khodadadi JM (2015) Experimental analysis of stable CuO nanoparticle enhanced lubricants. J Exp Nanosci 10(1):1–18 Yuan SM, Hou XB, Wang L et al (2018) Experimental investigation on the compatibility of nanoparticles with vegetable oils for nanofluid minimum quantity lubrication machining. Tribol Lett 66(3):1059. https://doi.org/10.1007/s11249-018-1059-1 Gao T, Zhang YB, Li CH et al (2022) Fiber-reinforced composites in milling and grinding: machining bottlenecks and advanced strategies. Front Mech Eng 17(2):24. https://doi.org/10.1007/s11465-022-0680-8 Sun YJ, Guo H, Guo SY et al (2023) Towards understanding the cutting temperature in ultrasonic vibration-assisted drilling based on the dynamic contact characteristics between the cutting edge and workpiece. Ultrasonics 135:107131. https://doi.org/10.1016/j.ultras.2023.107131 Kalita P, Malshe AP, Kumar SA et al (2012) Study of specific energy and friction coefficient in minimum quantity lubrication grinding using oil-based nanolubricants. J Manuf Process 14(2):160–166 Choi S, Zhang Z, Yu W et al (2001) Anomalous thermal conductivity enhancement in nanotube suspensions. Appl Phys Lett 79(14):2252–2254 Phuoc TX, Massoudi M, Chen RH (2011) Viscosity and thermal conductivity of nanofluids containing multi-walled carbon nanotubes stabilized by chitosan. Int J Therm Sci 50(1):12–18 Bai XF, Zhou FM, Li CH et al (2020) Physicochemical properties of degradable vegetable-based oils on minimum quantity lubrication milling. Int J Adv Manuf Tech 106(9/10):4143–4155 Ganvir RB, Walke PV, Kriplani VM (2017) Heat transfer characteristics in nanofluid–a review. Renew Sust Energ Rev 75:451–460 Lodhi MS, Sheorey T, Dutta G (2020) Single-phase fluid flow and heat transfer characteristics of nanofluid in a circular microchannel: development of flow and heat transfer correlations. P I Mech Eng C-J Mec 234(18):3689–3708 Yang M (2019) Medical thermodynamic mechanism and temperature field dynamic model of bio-bone micro-grinding with nanoparticle jet sparay cooling. Dissertation, Qingdao University of Technology Sui MH, Li CH, Wu WT et al (2021) Temperature of grinding carbide with castor oil-based MoS2 nanofluid minimum quantity lubrication. J Therm Sci Eng Appl 13(5):051001. https://doi.org/10.1115/1.4049982 Xu WH, Li CH, Zhang YB et al (2022) Electrostatic atomization minimum quantity lubrication machining: from mechanism to application. Int J Extrem Manuf 4(4):042003. https://doi.org/10.1088/2631-7990/ac9652 Gupta MK, Mia M, Pruncu CI et al (2020) Modeling and performance evaluation of Al2O3, MoS2 and graphite nanoparticle-assisted MQL in turning titanium alloy: an intelligent approach. J Braz Soc Mech Sci 42(4):207. https://doi.org/10.1007/s40430-020-2256-z Jia D, Li C, Liu J et al (2023) Prediction model of volume average diameter and analysis of atomization characteristics in electrostatic atomization minimum quantity lubrication. Friction 11(11):2107–2131 Talib N, Rahim EA (2018) Performance of modified jatropha oil in combination with hexagonal boron nitride particles as a bio-based lubricant for green machining. Tribol Int 118:89–104 Li BK, Li CH, Zhang YB et al (2016) Grinding temperature and energy ratio coefficient in MQL grinding of high-temperature nickel-base alloy by using different vegetable oils as base oil. Chinese J Aeronaut 29(4):1084–1095 Gu XS, Wang H, Zhao QL et al (2018) Effect of cutting tool geometries on the ductile-brittle transition of monocrystalline sapphire. Int J Mech Sci 148:565–577 Kamarulzaman MK, Hisham S, Kadirgama K et al (2023) Improvement in stability and thermophysical properties of CNC-MXene nanolubricant for Tribology application. J Mol Liq 381:121695. https://doi.org/10.1016/j.molliq.2023.121695 Marulasiddeshi HB, Kanti PK, Jamei M et al (2022) Experimental study on the thermal properties of Al2O3-CuO/water hybrid nanofluids: development of an artificial intelligence model. Int J Energ Res 46(15):21066–21083 Nwoguh TO, Okafor AC, Onyishi HA (2021) Enhancement of viscosity and thermal conductivity of soybean vegetable oil using nanoparticles to form nanofluids for minimum quantity lubrication machining of difficult-to-cut metals. Int J Adv Manuf Tech 113(11/12):3377–3388 Alimoradi H, Shams M, Ashgriz N (2023) Enhancement in the pool boiling heat transfer of copper surface by applying electrophoretic deposited graphene oxide coatings. Int J Multiphas Flow 159:104350. https://doi.org/10.1016/j.ijmultiphaseflow.2022.104350 Chidambaram E, Arunachalam N, Vijayaraghavan L (2015) Analytical model to predict Sauter mean diameter in air assisted atomizers for MQL in machining application. Procedia CIRP 37:117–121 Zarrag KZ, Ismail FB, Sann TE et al (2023) A review of nucleate pool-boiling heat transfer in different liquids and nanofluids. P I Mech Eng A-J Pow 237(7):1628–1641 Silva LR, Correa ECS, Brandao JR et al (2020) Environmentally friendly manufacturing: behavior analysis of minimum quantity of lubricant - MQL in grinding process. J Clean Prod 256:103287. https://doi.org/10.1016/j.jclepro.2013.01.033 Shabgard M, Seyedzavvar M, Mohammadpourfard M (2017) Experimental investigation into lubrication properties and mechanism of vegetable-based CuO nanofluid in MQL grinding. Int J Adv Manuf Technol 92:3807–3823 Seyedzavvar M, Abbasi H, Kiyasatfar M et al (2020) Investigation on tribological performance of CuO vegetable-oil based nanofluids for grinding operations. Adv Manuf 8(3):344–360 Pal A, Chatha SS, Sidhu HS (2020) Experimental investigation on the performance of MQL drilling of AISI 321 stainless steel using nano-graphene enhanced vegetable-oil-based cutting fluid. Tribol Int 151:106508. https://doi.org/10.1016/j.triboint.2020.106508 Virdi RL, Chatha SS, Singh H (2021) Performance evaluation of nanofluid-based minimum quantity lubrication grinding of Ni-Cr alloy under the influence of CuO nanoparticles. Adv Manuf 9(4):580–591 Demas NG, Timofeeva EV, Routbort JL et al (2012) Tribological effects of BN and MoS2 nanoparticles added to polyalphaolefin oil in piston skirt/cylinder liner tests. Tribol Lett 47:91–102 Rahman SS, Ashraf MZI, Amin A et al (2019) Tuning nanofluids for improved lubrication performance in turning biomedical grade titanium alloy. J Clean Prod 206:180–196 Hosseini SF, Emami M, Sadeghi MH (2018) An experimental investigation on the effects of minimum quantity nano lubricant application in grinding process of tungsten carbide. J Manuf Process 35:244–253 Jia DZ, Li CH, Zhang DK et al (2014) Experimental verification of nanoparticle jet minimum quantity lubrication effectiveness in grinding. J Nanopart Res 16(12):2758. https://doi.org/10.1007/s11051-014-2758-7 Chetan BBC, Ghosh S, Rao S et al (2016) Application of nanofluids during minimum quantity lubrication: a case study in turning process. Tribol Int 101:234–246 Wang Y, Li C, Zhang Y et al (2018) Processing characteristics of vegetable oil-based nanofluid MQL for grinding different workpiece materials. Int J Pr Eng Man-Gt 5(2):327–339 Singh RK, Sharma AK, Dixit AR et al (2017) Performance evaluation of alumina-graphene hybrid nano-cutting fluid in hard turning. J Clean Prod 162:830–845 Singh H, Sharma VS, Singh S et al (2019) Nanofluids assisted environmental friendly lubricating strategies for the surface grinding of titanium alloy: Ti6Al4V-ELI. J Manuf Process 39:241–249 Zhang Y, Li C, Jia D et al (2015) Experimental evaluation of the lubrication performance of MoS2/CNT nanofluid for minimal quantity lubrication in Ni-based alloy grinding. Int J Mach Tool Manu 99:19–33 Elcioglu EB, Murshed SS (2021) Ultrasonically tuned surface tension and nano-film formation of aqueous ZnO nanofluids. Ultrason Sonochem 72:105424. https://doi.org/10.1016/j.ultsonch.2020.105424 Yan LT, Zhang QJ, Yu JZ (2018) Effects of continuous minimum quantity lubrication with ultrasonic vibration in turning of titanium alloy. Int J Adv Manuf Tech 98(1/4):827–837 Rabiei F, Rahimi AR, Hadad MJ (2017) Performance improvement of eco-friendly MQL technique by using hybrid nanofluid and ultrasonic-assisted grinding. Int J Adv Manuf Tech 93(1/4):1001–1015 Molaie MM, Akbari J, Movahhedy MR (2016) Ultrasonic assisted grinding process with minimum quantity lubrication using oil-based nanofluids. J Clean Prod 129:212–222 Gao T, Li C, Jia D et al (2020) Surface morphology assessment of CFRP transverse grinding using CNT nanofluid minimum quantity lubrication. J Clean Prod 277:123328. https://doi.org/10.1016/j.jclepro.2020.123328 Wdowik R, Porzycki J, Magdziak M (2017) Measurements of surface texture parameters after ultrasonic assisted and conventional grinding of ZrO2 based ceramic material characterized by different states of sintering. Procedia CIRP 62:293–298 Liang YH, Chen Y, Chen BB et al (2019) Feasibility of ultrasonic vibration assisted grinding for carbon fiber reinforced polymer with monolayer brazed grinding tools. Int J Precis Eng Man 20(7):1083–1094 Zhou WH, Tang JY, Chen HF et al (2019) A comprehensive investigation of surface generation and material removal characteristics in ultrasonic vibration assisted grinding. Int J Mech Sci 156:14–30 Xu MC, Dai QW, Huang W et al (2020) Using magnetic fluids to improve the behavior of ball bearings under starved lubrication. Tribol Int 141:105950. https://doi.org/10.1016/j.triboint.2019.105950 Cui X, Li CH, Zhang YB et al (2023) Comparative assessment of force, temperature, and wheel wear in sustainable grinding aerospace alloy using biolubricant. Front Mech Eng 18(1):3. https://doi.org/10.1007/s11465-022-0719-x Wang J, Li GL, Zhu HX et al (2019) Experimental investigation on convective heat transfer of ferrofluids inside a pipe under various magnet orientations. Int J Heat Mass Traner 132:407–419 Lv T, Xu XF, Weng HZ et al (2022) A study on lubrication and cooling performance and machining characteristics of magnetic field-assisted minimum quantity lubrication using Fe3O4 nanofluid as cutting fluid. Int J Adv Manuf Tech 123(11/12):3857–3869 Guo XH, Huang Q, Wang CD et al (2022) Effect of magnetic field on cutting performance of micro-textured tools under Fe3O4 nanofluid lubrication condition. J Mater Process Tech 299:117382. https://doi.org/10.1016/j.jmatprotec.2021.117382 Zhang XT, Li CH, Zhou ZM et al (2023) Vegetable oil-based nanolubricants in machining: from physicochemical properties to application. Chin J Mech Eng-En 36(1):76. https://doi.org/10.1186/s10033-023-00895-5 Chetan GS, Rao PV (2019) Comparison between sustainable cryogenic techniques and nano-MQL cooling mode in turning of nickel-based alloy. J Clean Prod 231:1036–1049 Goindi GS, Sarkar P (2017) Dry machining: a step towards sustainable machining–challenges and future directions. J Clean Prod 165:1557–1571 Soares LAP, Firmino AS, de Oliveira JA et al (2022) Comparative LCA of automotive gear hobbing processes with flood lubrication and MQL. Int J Adv Manuf Tech 119(1/2):1071–1090 Debnath S, Reddy MM, Yi QS (2014) Environmental friendly cutting fluids and cooling techniques in machining: a review. J Clean Prod 83:33–47 Mallick R, Kumar R, Panda A et al (2023) Current status of hard turning in manufacturing: aspects of cooling strategy and sustainability. Lubricants 11(3):11030180. https://doi.org/10.3390/lubricants11030108 Yap CY, Liew PJ, Yan J (2020) Surface modification of tungsten carbide cobalt by electrical discharge coating with quarry dust suspension. Int J Adv Manuf Tech 111(7/8):2105–2116 Yin QA, Li CH, Zhang YB et al (2018) Spectral analysis and power spectral density evaluation in Al2O3 nanofluid minimum quantity lubrication milling of 45 steel. Int J Adv Manuf Tech 97(1/4):129–145 Hegab H, Darras B, Kishawy H (2018) Sustainability assessment of machining with nano-cutting fluids. Procedia Manuf 26:245–254 Ramanan KV, Babu SR, Jebaraj M et al (2021) Face turning of Incoloy 800 under MQL and nano-MQL environments. Mater Manuf Process 36(15):1769–1780 Deiab I, Raza SW, Pervaiz S (2014) Analysis of lubrication strategies for sustainable machining during turning of titanium Ti-6Al-4V alloy. Procedia CIRP 17:766–771 Khan AM, Gupta MK, Hegab H et al (2020) Energy-based cost integrated modelling and sustainability assessment of Al-GnP hybrid nanofluid assisted turning of AISI52100 steel. J Clean Prod 257:120520. https://doi.org/10.1016/j.jclepro.2020.120502 Ic YT, Guler ES, Cabbaroglu C et al (2018) Optimisation of cutting parameters for minimizing carbon emission and maximising cutting quality in turning process. Int J Prod Res 56(11):4035–4055 Priarone PC, Robiglio M, Settineri L (2018) On the concurrent optimization of environmental and economic targets for machining. J Clean Prod 190:630–644 Yi Q, Li CB, Tang Y et al (2015) Multi-objective parameter optimization of CNC machining for low carbon manufacturing. J Clean Prod 95:256–264 Singh G, Aggarwal V, Singh S et al (2023) Performance investigations for sustainability assessment of Hastelloy C-276 under different machining environments. Heliyon 9(3):13933. https://doi.org/10.1016/j.heliyon.2023.e13933 Khan AM, Zhao W, Li L et al (2021) Assessment of cumulative energy demand, production cost, and CO2 emission from hybrid CryoMQL assisted machining. J Clean Prod 292:125952. https://doi.org/10.1016/j.jclepro.2021.125952 Sharma AK, Katiyar JK, Bhaumik S et al (2019) Influence of alumina/MWCNT hybrid nanoparticle additives on tribological properties of lubricants in turning operations. Friction 7(2):153–168 Padhan S, Dash L, Behera SK et al (2022) Modeling and optimization of power consumption for economic analysis, energy-saving carbon footprint analysis, and sustainability assessment in finish hard turning under graphene nanoparticle–assisted minimum quantity lubrication. Proc Integr Optim 45(4):445–463 Aydin DY, Guru M (2022) Nanofluids: preparation, stability, properties, and thermal performance in terms of thermo-hydraulic, thermodynamics and thermo-economic analysis. J Therm Anal Calorim 147(14):7631–7664 Virdi RL, Pal A, Chatha SS et al (2023) A review on minimum quantity lubrication technique application and challenges in grinding process using environment-friendly nanofluids. J Braz Soc Mech Sci 45(5):238. https://doi.org/10.1007/s40430-023-04159-0