NURBS-based isogeometric analysis of buckling and free vibration problems for laminated composites plates with complicated cutouts using a new simple FSDT theory and level set method

Chai, 1996, Free vibration of laminated composite plates with a central circular hole, Compos. Struct., 35, 357, 10.1016/S0263-8223(96)00037-2

Sivakumar, 1999, Free vibration of laminated composite plates with cutout, J. Sound. Vib., 221, 443, 10.1006/jsvi.1998.2034

Komur, 2010, Buckling analysis of laminated composite plates with an elliptical/circular cutout using FEM, Adv. Eng. Softw., 41, 161, 10.1016/j.advengsoft.2009.09.005

Kumar, 2010, Effects of boundary conditions on buckling and postbuckling responses of composite laminate with various shaped cutouts, Compos. Struct., 92, 769, 10.1016/j.compstruct.2009.08.049

Kumar, 2004, Tension buckling and parametric instability characteristics of doubly curved panels with circular cutout subjected to nonuniform tensile edge loading, Thin-Walled Struct., 42, 947, 10.1016/j.tws.2004.03.009

Chen, 2000, Free vibration of symmetrically laminated thick perforated plates, J. Sound. Vib., 230, 111, 10.1006/jsvi.1999.2612

Liu, 2008, Static and free vibration analysis of laminated composite plates using the conforming radial point interpolation method, Compos. Sci. Technol., 68, 354, 10.1016/j.compscitech.2007.07.014

Ferreira, 2011, Buckling analysis of isotropic and laminated plates by radial basis functions according to a higher-order shear deformation theory, Thin-Walled Struct., 49, 804, 10.1016/j.tws.2011.02.005

Eccher, 2008, Elastic buckling analysis of perforated thin-walled structures by the isoparametric spline finite strip method, Thin-Walled Struct., 46, 165, 10.1016/j.tws.2007.08.030

Ovesy, 2012, Buckling and free vibration finite strip analysis of composite plates with cutout based on two different modeling approaches, Compos. Struct., 94, 1250, 10.1016/j.compstruct.2011.11.009

Zhang, 2006, Free vibration analysis of rectangular composite laminates using a layerwise cubic B-spline finite strip method, Thin-Walled Struct., 44, 601, 10.1016/j.tws.2006.05.008

Assaee, 2015, Forced vibration analysis of composite cylindrical shells using spline finite strip method, Thin-Walled Struct., 97, 207, 10.1016/j.tws.2015.09.014

Natarajan, 2014, Hygrothermal effects on the free vibration and buckling of laminated composites with cutouts, Compos. Struct., 108, 848, 10.1016/j.compstruct.2013.10.009

Stavsky, 1961, Bending and stretching of laminated aeolotropic plates, J. Eng. Mech. (ASCE), 87, 31

Yang, 1966, Elastic wave propagation in heterogeneous plates, Int. J. Solids Struct., 2, 665, 10.1016/0020-7683(66)90045-X

Whitney, 1969, Analysis of heterogeneous anisotropic plates, J. Appl. Mech., 36, 261, 10.1115/1.3564618

Malekzadeh, 2014, Free vibration of quadrilateral laminated plates with carbon nanotube reinforced composite layers, Thin-Walled Struct., 82, 221, 10.1016/j.tws.2014.04.016

Liew, 2003, Vibration analysis of symmetrically laminated plates based on FSDT using the moving least squares differential quadrature method, Comput. Methods Appl. Mech. Eng., 192, 2203, 10.1016/S0045-7825(03)00238-X

Liew, 1996, Differential quadrature method for thick symmetric cross-ply laminates with first-order shear flexibility, Int. J. Solids Struct., 33, 2647, 10.1016/0020-7683(95)00174-3

Reddy, 1985, Stability and vibration of isotropic, orthotropic and laminated plates according to a higher order shear deformation theory, J. Sound. Vib., 98, 157, 10.1016/0022-460X(85)90383-9

Khdeir, 1988, Analysis of symmetric cross-ply elastic plates using a higher-order theory: Part II–Buckling and free vibration, Compos. Struct., 9, 259, 10.1016/0263-8223(88)90048-7

Chakrabarti, 2003, Buckling of laminated composite plates by a new element based on higher order shear deformation theory, Mech. Compos. Mater. St., 10, 303

Thai, 2013, A simple first-order shear deformation theory for the bending and free vibration analysis of functionally graded plates, Compos. Struct., 101, 332, 10.1016/j.compstruct.2013.02.019

Thai, 2013, A simple first-order shear deformation theory for laminated composite plates, Compos. Struct., 106, 754, 10.1016/j.compstruct.2013.06.013

Hughes, 2005, Isogeometric analysis: CAD, finite elements, NURBS, exact geometry and mesh refinement, Comput. Methods Appl. Mech. Eng., 194, 4135, 10.1016/j.cma.2004.10.008

Lezgy-Nazargah, 2014, An isogeometric approach for the analysis of composite steel–concrete beams, Thin-Walled Struct., 84, 406, 10.1016/j.tws.2014.07.014

Valizadeh, 2013, NURBS-based finite element analysis of functionally graded plates: static bending, vibration, buckling and flutter, Compos. Struct., 99, 309, 10.1016/j.compstruct.2012.11.008

Valizadeh, 2013, Isogeometric simulation for buckling, free and forced vibration of orthotropic plates, Inter J. Appl. Mech., 5, 1350017, 10.1142/S1758825113500178

Yin, 2015, Geometrically nonlinear analysis of functionally graded plates using isogeometric analysis, Eng. Comput., 32, 519, 10.1108/EC-09-2013-0220

Yin, 2014, Isogeometric locking-free plate element: A simple first order shear deformation theory for functionally graded plates, Compos. Struct., 118, 121, 10.1016/j.compstruct.2014.07.028

Bazilevs, 2007, Variational multiscale residual-based turbulence modeling for large eddy simulation of incompressible flows, Comput. Methods Appl. Mech. Eng., 197, 173, 10.1016/j.cma.2007.07.016

Bazilevs, 2008, Isogeometric fluid–structure interaction: theory, algorithms, and computations, Comput. Mech., 43, 3, 10.1007/s00466-008-0315-x

Bui, 2015, Extended isogeometric dynamic and static fracture analysis for cracks in piezoelectric materials using NURBS, Comput. Methods Appl. Mech. Eng., 295, 470, 10.1016/j.cma.2015.07.005

Lu, 2011, Isogeometric contact analysis: geometric basis and formulation for frictionless contact, Comput. Methods Appl. Mech. Eng., 200, 726, 10.1016/j.cma.2010.10.001

Nguyen, 2014, Isogeometric analysis for unsaturated flow problems, Comput. Geotech., 62, 257, 10.1016/j.compgeo.2014.08.003

Wall, 2008, Isogeometric structural shape optimization, Comput. Methods Appl. Mech. Eng., 197, 2976, 10.1016/j.cma.2008.01.025

Shojaee, 2012, Free vibration and buckling analysis of laminated composite plates using the NURBS-based isogeometric finite element method, Compos. Struct., 94, 1677, 10.1016/j.compstruct.2012.01.012

Shojaee, 2012, Free vibration analysis of thin plates by using a NURBS-based isogeometric approach, Finite Elem. Anal. Des., 61, 23, 10.1016/j.finel.2012.06.005

Schmidt, 2012, Isogeometric analysis of trimmed NURBS geometries, Comput. Methods Appl. Mech. Eng., 241–244, 93, 10.1016/j.cma.2012.05.021

Bui, 2013, Analysis of generalized dynamic intensity factors of cracked magnetoelectroelastic solids by X-FEM, Finite Elem. Anal. Des., 69, 19, 10.1016/j.finel.2013.02.001

Rank, 2012, Geometric modeling, isogeometric analysis and the finite cell method, Comput. Methods Appl. Mech. Eng., 249–252, 104, 10.1016/j.cma.2012.05.022

Schillinger, 2012, An isogeometric design-through-analysis method based on adaptive hierarchical refinement of NURBS, immersed boundary methods, and T-spline CAD surfaces, Comput. Methods Appl. Mech. Eng., 249, S116, 10.1016/j.cma.2012.03.017

Yu, 2015, A simple FSDT-based isogeometric analysis for geometrically nonlinear analysis of functionally graded plates, Fin. Elem. Anal. Des., 96, 1, 10.1016/j.finel.2014.11.003

Reddy, 2004

Roufaeil, 1982, Raleigh–Ritz vibration analysis of rectangular Mindlin plates subjected to membrane stresses, J. Sound. Vib., 85, 263, 10.1016/0022-460X(82)90521-1

Leung, 2005, Free vibration of laminated composite plates subjected to in-plane stresses using trapezoidal p-element, Compos. Struct., 68, 167, 10.1016/j.compstruct.2004.03.011

Osher, 1988, Fronts propagating with curvature-dependent speed: algorithms based on Hamilton–Jacobian formulations, J. Comput. Phys., 79, 12, 10.1016/0021-9991(88)90002-2

Huang, 1999, Free vibration analysis of rectangular plates with variously-shaped holes, J. Sound. Vib., 226, 769, 10.1006/jsvi.1999.2313

Ali, 1980, Prediction of natural frequencies of vibration of rectangular plates with rectangular cutout, Comput. Struct., 12, 819, 10.1016/0045-7949(80)90019-X

Cheung, 1993, Linear elastic stability analysis of shear-deformable plates using a modified spline finite strip method, Compos. Struct., 41, 189, 10.1016/0045-7949(93)90366-L

Tham, 1986, Free vibration and buckling analysis of plates by the negative stiffness method, Compos. Struct., 22, 687, 10.1016/0045-7949(86)90022-2

Bui, 2011, An efficient meshfree method for vibration analysis of laminated composite plates, Comput. Mech., 48, 175, 10.1007/s00466-011-0591-8

Liew, 1993, Transverse vibration of thick rectangular plates––IV. Influence of isotropic in-plane stresses, Comput. Struct., 49, 69, 10.1016/0045-7949(93)90125-W

Liew, 1996, Solving the vibration of thick symmetric laminates by Reissner/Mindlin plate theory and the p-Ritz method, J. Sound. Vib., 198, 343, 10.1006/jsvi.1996.0574

Qablan, 2009, Assessment of the buckling behavior of square composite plates with circular cutout subjected to in-plane shear, Jordan J. Civ. Eng., 3, 184