NMR imaging study and multi-Fickian numerical simulation of moisture transfer in Norway spruce samples

Skaar, 1998 Gereke, 2010, Moisture-induced stresses and distortions in spruce cross-laminates and composite laminates, Holzforschung, 64, 127, 10.1515/hf.2010.003 Nore K, Thue JV. In: C. Rode (Eds), Proceedings of 8th symposium on building physics in the Nordic countries. 16–18 June. Copenhagen. Denmark; 2008. p. 991–998. Blümich, 2000 Bucur, 2003 Stenstroem, 2009, vol. 2, 91 Menon, 1989, Quantitative separation of NMR images of water in wood on the basis of T2, J. Magn. Reson., 82, 205 Quick, 1990, Radial moisture profiles of cedar sapwood during drying — a proton magnetic-resonance study, Wood Fiber Sci., 22, 404 Araujo, 1992, Proton magnetic-resonance techniques for characterization of water in wood — application to white spruce, Wood Sci. Technol., 26, 101, 10.1007/BF00194466 MacMillan, 2002, Magnetic resonance imaging of water concentration in low moisture content wood, Wood Fiber Sci., 34, 276 Rosenkilde, 2002, High resolution measurement of the surface layer moisture content during drying of wood using a novel magnetic resonance imaging technique, Holzforschung, 56, 312, 10.1515/HF.2002.050 Hameury, 2006, Magnetic resonance imaging of moisture distribution in Pinus sylvestris L. Exposed to daily indoor relative humidity fluctuations, Wood Mater. Sci. Eng., 1, 116, 10.1080/17480270601150578 Dvinskikh SV, Furó I, Sandberg D, Söderström O. Moisture content profiles and uptake kinetics in wood cladding materials evaluated by a portable NMR spectrometer. Wood Material Science and Engineering 2011, in press (doi:10.1080/17480272.2010.543288). Dvinskikh, 2011, A multinuclear magnetic resonance imaging (MRI) study of wood with adsorbed water — estimating bound water concentration and local wood density, Holzforschung, 65, 103, 10.1515/hf.2010.121 Luikov, 1975, Systems of differential equations of heat and mass transfer in capillary-porous bodies, Int. J. Heat Mass Transfer, 18, 1, 10.1016/0017-9310(75)90002-2 Luikov, 1980 Bear, 1980 Hassanizadeh, 1979, General conservation equations for multiphase systems 1. Averaging technique, Adv. Water Res., 2, 131, 10.1016/0309-1708(79)90025-3 Kokaefe, 2007, Comparison of different models for the high-temperature heat-treatment of wood, Int. J. Thermal Sci., 46, 707, 10.1016/j.ijthermalsci.2006.09.001 Frandsen, 2007, A revised multi-Fickian moisture transport model to describe non-Fickian effects in wood, Holzforschung, 61, 563, 10.1515/HF.2007.085 Cunningham, 1994, A model to explain “anomalous moisture” sorption in wood under step function driving forces, Wood Fiber Sci., 27, 265 Salin, 1996, Mass transfer from wooden surfaces and internal moisture non-equilibrium, Wood Fiber Sci., 10, 218 Absetz, 1997, Fundamental diffusion behaviour of wood, vol. E8, 89 Krabbenhøft, 2004, A model for non-Fickian moisture transfer in wood, Mater. Struct., 37, 615, 10.1617/14036 Wadsö, 1994, Describing non-Fickian water-vapor sorption in wood, J. Mater. Sci., 29, 2367, 10.1007/BF00363428 Wadsö, 1994, Unsteady-state water-vapor adsorption in wood: an experimental study, Wood Fiber Sci., 26, 36 Abaqus/Standard. Theory Manual. Version 6.8. Dassault Systèmes Simulia Corp. Providence. 2008. Abaqus/Standard, User’s Manual. Version 6.8. Dassault Systèmes Simulia Corp. Providence. 2008. Toratti, 2000, Mechano-sorptive experiments perpendicular to grain under tensile and compressive loads, Wood Sci. Technol., 34, 317, 10.1007/s002260000059 Svensson, 2002, Mechanical response of wood perpendicular to grain when subjected to changes of humidity, Wood Sci. Technol., 36, 145, 10.1007/s00226-001-0130-4 Jönsson J. Moisture induced stresses in timber structures, dissertation nr. TVBK-1031 Division of Structural Engineering. Lund University of Technology. 2005. Sjödin J. Strength and moisture aspects of steel–timber dowel joints in glulam structures. An experimental and numerical study. doctoral thesis. Växjö University; 2008. Fortino, 2009, A 3D moisture-stress FEM analysis for time dependent problems in timber structures, Mech. Time-Dependent Mater., 13, 333, 10.1007/s11043-009-9103-z 2003, Effects of climate and climate variations on strength Emid, 1985, High-resolution NMR imaging in solids, Physica B, 128, 81, 10.1016/0378-4363(85)90087-7 Balcom, 1996, Single-point ramped imaging with T-1 enhancement (SPRITE), J. Magn. Reson. Ser. A, 123, 131, 10.1006/jmra.1996.0225 Frandsen, 2007, Implementation of sorption hysteresis in multi-Fickian moisture transport, Holzforschung, 61, 693, 10.1515/HF.2007.113 Frandsen HL. Modeling of moisture transport in wood. Wood science and timber engineering. Department of structural engineering and building technology. Aalborg University Aalborg; 2005.