Myths and Truths of Nitinol Mechanics: Elasticity and Tension–Compression Asymmetry

Shape Memory and Superelasticity - Tập 2 - Trang 264-271 - 2016
Ashley N. Bucsek1, Harshad M. Paranjape1, Aaron P. Stebner1
1Department of Mechanical Engineering, Colorado School of Mines, Golden, USA

Tóm tắt

Two prevalent myths of Nitinol mechanics are examined: (1) Martensite is more compliant than austenite; (2) Texture-free Nitinol polycrystals do not exhibit tension–compression asymmetry. By reviewing existing literature, the following truths are revealed: (1) Martensite crystals may be more compliant, equally stiff, or stiffer than austenite crystals, depending on the orientation of the applied load. The Young’s Modulus of polycrystalline Nitinol is not a fixed number—it changes with both processing and in operando deformations. Nitinol martensite prefers to behave stiffer under compressive loads and more compliant under tensile loads. (2) Inelastic Nitinol martensite deformation in and of itself is asymmetric, even for texture-free polycrystals. Texture-free Nitinol polycrystals also exhibit tension–compression transformation asymmetry.

Tài liệu tham khảo

Chang LC, Read TA (1951) Plastic deformation and diffusionless phase changes in metals-The gold-cadmium beta-phase. Am Inst Min Metall Eng 191(1):47–52 Chang L-C (1951) Atomic displacements and crystallographic mechanisms in diffusionless transformation of gold–cadium single crystals containing 47.5 atomic per cent cadmium. Acta Crystallogr 4(4):320–324 Basinski Z, Christian J (1954) Experiments on the martensitic transformation in single crystals of indium-thallium alloys. Acta Metall 2(1):148–166 Buehler WJ, Gilfrich JV, Wiley RC (1963) Effect of low-temperature phase changes on the mechanical properties of alloys near composition TiNi. J Appl Phys 34(5):1475–1477 Buehler WJ, Wang FE (1968) A summary of recent research on the Nitinol alloys and their potential application in ocean engineering. Ocean Eng 1(1):105–120 Buehler WJ, Wiley RC (1962) TiNi-ductile intermetallic compound. Trans Am Soc Met 55:269–276 Buehler WJ (1963) Intermetallic compound based materials for structural applications. In: US Naval Ordinance Laboratory Silver Springs, Maryland, The seventh navy science symposium: solution to navy problems through advanced technology, vol 14, pp 15–16 Duerig TW, Melton KN, Stockel D, Wayman CM (1990) Engineering aspects of shape memory alloys. Butterworth-Heinemann, Boston Otsuka K, Wayman CM (1998) Shape memory materials. Cambridge University Press, Cambridge Bhattacharya K (2003) Microstructure of martensite: why it forms and how it gives rise to the shape memory effect. Oxford University Press, Oxford Otsuka K, Ren X (2005) Physical metallurgy of Ti–Ni-based shape memory alloys. Prog Mater Sci 50(5):511–678 Hodgson DE, Ming W, Biermann RJ (1990) “Shape Memory Alloys”, in Metals Handbook, vol 2, 10th edn. ASM International, Materials Park, pp 897–902 Liu Y, Xiang H (1998) Apparent modulus of elasticity of near-equiatomic NiTi. J Alloys Compd 270:154–159 Liu Y, Yang H (1999) The concern of elasticity in stress-induced martensitic transformation in NiTi. Mater Sci Eng A 260(1–2):240–245 Ren X, Miura N, Zhang J, Otsuka K, Tanaka K, Koiwa M, Suzuki T, Chumlyakov YI, Asai M (2001) A comparative study of elastic constants of Ti–Ni-based alloys prior to martensitic transformation. Mater Sci Eng A 312(1–2):196–206 Rajagopalan S, Little AL, Bourke MAM, Vaidyanathan R (2005) Elastic modulus of shape-memory NiTi from in situ neutron diffraction during macroscopic loading, instrumented indentation, and extensometry. Appl Phys Lett 86(8):081901 Sehitoglu H, Karaman I, Anderson R, Zhang X, Gall K, Maier HJ, Chumlyakov Y (2000) Compressive response of NiTi single crystals. Acta Mater 48:3311–3326 Wagner MF-X, Windl W (2008) Lattice stability, elastic constants and macroscopic moduli of NiTi martensites from first principles. Acta Mater 56(20):6232–6245 Hatcher N, Kontsevoi OY, Freeman AJ (2009) Role of elastic and shear stabilities in the martensitic transformation path of NiTi. Phys Rev B 80(14):144203 Liu Y, Xie Z, Humbeeck JV, Delaey L (1998) Asymmetry of stress–strain curves under tension and compression for NiTi shape memory alloys. Acta Mater 46(12):4325–4338 Saburi T, Nenno S, Aaronson H, Laughiin D, Sekerka R, Wayman C (1981) Solid to solid phase transformations. Metals Society of AIME, Warrendale, p 1455 Stebner A, Vogel S, Noebe R, Sisneros T, Clausen B, Brown D, Garg A, Brinson L (2013) Micromechanical quantification of elastic, twinning, and slip strain partitioning exhibited by polycrystalline, monoclinic nickel–titanium during large uniaxial deformations measured via in situ neutron diffraction. J Mech Phys Solids 61(11):2302–2330 Stebner A, Brown D, Brinson L (2013) Young’s modulus evolution and texture-based elastic–inelastic strain partitioning during large uniaxial deformations of monoclinic nickel–titanium. Acta Mater 61(6):1944–1956 Cai S, Schaffer JE, Ren Y, Yu C (2013) Texture evolution during nitinol martensite detwinning and phase transformation. Appl Phys Lett 103(24):241909 Šittner P, Heller L, Pilch J, Curfs C, Alonso T, Favier D (2014) Young’s modulus of austenite and martensite phases in superelastic NiTi wires. J Mater Eng Perform 23(7):2303–2314 Bowers ML, Gao Y, Yang L, Gaydosh DJ, De Graef M, Noebe RD, Wang Y, Mills MJ (2015) Austenite grain refinement during load-biased thermal cycling of a Ni49.9Ti50.1 shape memory alloy. Acta Mater 91:318–329 Benafan O, Noebe RD, Padula SA, Garg A, Clausen B, Vogel S, Vaidyanathan R (2013) Temperature dependent deformation of the B2 austenite phase of a NiTi shape memory alloy. Int J Plast 51:103–121 Mercier O, Melton KN, Gremaud G, Hägi J (1980) Single-crystal elastic constants of the equiatomic NiTi alloy near the martensitic transformation. J Appl Phys 51(3):1833–1834 Stebner AP, Brown DW, Brinson LC (2013) Measurement of elastic constants of monoclinic nickel-titanium and validation of first principles calculations. Appl Phys Lett 102(21):211908 Wang J, Sehitoglu H (2014) Martensite modulus dilemma in monoclinic NiTi-theory and experiments. Int J Plast 61:17–31 Patoor E, Eberhardt A, Berveiller M (1998) Micromechanical modeling of shape memory alloys behavior. Arch Mech 40:775–794 Kocks UF, Tome CN, Wenk H-R (1998) Texture and anisotropy. Cambridge University Press, Cambridge Kudoh Y, Tokonami M, Miyazaki S, Otsuka K (1985) Crystal structure of the martensite in Ti-49.2 at.% Ni alloy analyzed by the single crystal X-ray diffraction method. Acta Metall 33(11):2049–2056 Nishida M, Ii S, Kitamura K, Furukawa T, Chiba A, Hara T, Hiraga K (1998) New deformation twinning mode of B19′ martensite in Ti-Ni shape memory alloy. Scr Mater 39(12):1749–1754 Karaman I, Kulkarni A, Luo Z (2005) Transformation behaviour and unusual twinning in a NiTi shape memory alloy ausformed using equal channel angular extrusion. Philos Mag 85(16):1729–1745 Burkart MW (1953) Diffusionless phase change in the indiumthallium system. Am Inst Min Metall Eng 227:1515–1524 Miyazaki S, Kimura S, Otsuka K, Suzuki Y (1984) The habit plane and transformation strains associated with the martensitic transformation in Ti-Ni single crystals. Scr Metall 18(9):883–888 Thamburaja P, Anand L (2001) Polycrystalline shape-memory materials: effect of crystallographic texture. J Mech Phys Solids 49(4):709–737 Gall K, Sehitoglu H, Chumlyakov YI, Kireeva IV (1999) Tension–compression asymmetry of the stress–strain response in aged single crystal and polycrystalline NiTi. Acta Mater 47(4):1203–1217 Bhattacharya K, Kohn RV (1996) Symmetry, texture and the recoverable strain of shape-memory polycrystals. Acta Mater 44(2):529–542 Shu YC, Bhattacharya K (1998) The influence of texture on the shape-memory effect in polycrystals. Acta Mater 46(15):5457–5473 Stebner AP, Bigelow GS, Yang J, Shukla DP, Saghaian SM, Rogers R, Garg A, Karaca HE, Chumlyakov Y, Bhattacharya K et al (2014) Transformation strains and temperatures of a nickel–titanium–hafnium high temperature shape memory alloy. Acta Mater 76:40–53 Bucsek AN, Hudish GA, Bigelow GS, Noebe RD, Stebner AP (2016) Composition, compatibility, and the functional performances of ternary nitix high-temperature shape memory alloys. Shape Mem Superelast 2(1):62–79 Šittner P, Novák V (2000) Anisotropy of martensitic transformations in modeling of shape memory alloy polycrystals. Int J Plast 16(10–11):1243–1268 Novak V, Sittner P (2004) Micromechanics modelling of NiTi polycrystalline aggregates transforming under tension and compression stress. Mater Sci Eng 378:490–498 Vaidyanathan R, Bourke M, Dunand D (2001) Texture, strain, and phase-fraction measurements during mechanical cycling in superelastic NiTi. Metall Mater Trans A 32(13):777–786 Stebner AP (2012) Partitioning of elastic, transformation, and plastic strains exhibited by shape-memory nickel-titanium through modeling and neutron diffraction. Ph.D. thesis, Northwestern University Santo Padula I, Qiu S, Gaydosh D, Noebe R, Bigelow G, Garg A, Vaidyanathan R (2012) Effect of upper-cycle temperature on the load-biased, strain-temperature response of NiTi. Metall Mater Trans A 43(12):4610–4621 Stebner AP, Paranjape HM, Clausen B, Brinson LC, Pelton AR (2015) In Situ Neutron Diffraction Studies of Large Monotonic Deformations of Superelastic Nitinol. Shape Mem Superelast 1(2):252–267 Kimiecik M, Jones J, Daly S (2015) Grain orientation dependence of martensitic phase transformation in polycrystalline shape memory alloys. Acta Mater 94:214–223 Kimiecik M, Jones JW, Daly S (2016) The effect of microstructure on stress-induced martensitic transformation under cyclic loading in the SMA Nickel-Titanium. J Mech Phys Solids 89:16–30 Kimiecik M, Jones JW, Daly S (2013) Quantitative Studies of microstructural phase transformation in Nickel–Titanium. Mater Lett 95:25–29 Richards AW, Lebensohn RA, Bhattacharya K (2013) Interplay of martensitic phase transformation and plastic slip in polycrystals. Acta Mater 61(12):4384–4397 Stebner A, Bhattacharya K (2014) Micromechanics inspired, phenomenological model of fully coupled plasticity, phase transformation, and martensite reorientation in shape memory alloys. In: Bajaj A, Zavattieri P, Koslowski M, Siegmund T (eds) Proceedings of the society of engineering science 51st annual technical meeting, Purdue University Libraries Scholarly Publishing Services, West Lafayette, October 1–3 2014. http://docs.lib.purdue.edu/ses2014/mss/cppt/3 Pelton AR, Clausen B, Stebner AP (2015) In Situ Neutron Diffraction Studies of Increasing Tension Strains of Superelastic Nitinol. Shape Mem Superelast 1(3):375–386