Multiscale stiffness characterisation of both healthy and osteoporotic bone tissue using subject-specific data

Daniel M. Prada1, Andres F. Galvis2, Johnathan Miller3, Jamie M. Foster2, Cecilia Zavaglia1
1School of Mechanical Engineering, University of Campinas, Campinas 13083-860, Brazil
2School of Mathematics and Physics, University of Portsmouth, Portsmouth PO1 2UP, UK
3Faculty of Health, University of Valle, Cali, 760043, Colombia

Tài liệu tham khảo

Alcântara, 2019, Patient-specific bone multiscale modelling, fracture simulation and risk analysis—A survey, Materials, 13, 106, 10.3390/ma13010106 Alcântara, 2022, Devising bone molecular models at the nanoscale: From usual mineralized collagen fibrils to the first bone fibers including hydroxyapatite in the extra-fibrillar volume, Materials, 15, 10.3390/ma15062274 Alvarez, 2021, A fully dynamic bridging approach for modeling the intergranular failure mechanisms in 2D polycrystalline materials, Mech. Mater., 159, 10.1016/j.mechmat.2021.103920 Ashique, 2017, Lacunar-Canalicular network in femoral cortical bone is reduced in aged women and is predominantly due to a loss of Canalicular porosity, Bone Rep., 7, 9, 10.1016/j.bonr.2017.06.002 Baim, 2017, The future of fracture risk assessment in the management of osteoporosis, J. Clin. Densitom., 20, 451, 10.1016/j.jocd.2017.06.015 Barkaoui, 2014, Multiscale approach including microfibril scale to assess elastic constants of cortical bone based on neural network computation and homogenisation method, Int. J. Numer. Methods Biomed. Eng., 30, 318, 10.1002/cnm.2604 Barkaoui, 2011, Finite element 3D modeling of mechanical behaviour of mineralized collagen microfibril, J. Appl. Biomater. Biomech., 9, 207 Barkaoui, 2016, A multiscale modelling of bone ultrastructure elastic proprieties using finite elements simulation and neural network method, Comput. Methods Programs Biomed., 134, 69, 10.1016/j.cmpb.2016.07.005 Choi, 1990, The elastic moduli of human subchondral, trabecula, and cortical bone modulus, Biomech., 23, 1103, 10.1016/0021-9290(90)90003-L Colloca, 2014, A multiscale analytical approach for bone remodeling simulations: Linking scales from collagen to trabeculae, Bone, 64, 303, 10.1016/j.bone.2014.03.050 Cowin, 2005, On singularities associated with the curvilinear anisotropic elastic symmetries, Int. J. Non-Linear Mech., 40, 361, 10.1016/j.ijnonlinmec.2004.07.005 Dall’Ara, 2013, A nonlinear QCT-based finite element model validation study for the human femur tested in two configurations in vitro, Bone, 52, 27, 10.1016/j.bone.2012.09.006 Drouet, 2018, Nanocrystalline apatites: The fundamental role of water, Am. Mineral., 103, 550, 10.2138/am-2018-6415 Enns-Bray, 2018, Biofidelic finite element models for accurately classifying hip fracture in a retrospective clinical study of elderly women from the AGES Reykjavik Cohort, Bone, 120, 25, 10.1016/j.bone.2018.09.014 Fish, 2010 Fish, 2016, Multiscale modeling of femur fracture, Int. J. Numer. Methods Eng., 111, 3, 10.1002/nme.5450 Foster, 2016, A mathematical model for mechanically-induced deterioration of the binder in lithium-ion electrodes, SIAM J. Appl. Math., 77, 172 Fratzl, 1998, Fibrillar structure and mechanical properties of collagen, J. Struct. Biol., 122, 119, 10.1006/jsbi.1998.3966 Fritsch, 2006, ‘Universal’ Microstructural patterns in cortical and trabecular, extracellular and extravascular bone materials: micromechanics-based prediction of anisotropic Elasticity, J. Theoret. Biol., 244, 597, 10.1016/j.jtbi.2006.09.013 Galvis, 2021, BESLE: Boundary element software for 3D linear elasticity, Comput. Phys. Comm., 265, 10.1016/j.cpc.2021.108009 Galvis, 2018, Analysis of three-dimensional hexagonal and cubic polycrystals using the boundary element method, Mech. Mater., 117, 58, 10.1016/j.mechmat.2017.10.009 Galvis, 2018, Dynamic analysis of three-dimensional polycrystalline materials using the boundary element method, Comput. Struct., 200, 11, 10.1016/j.compstruc.2018.02.009 Galvis, 2020, Multiscale model of the role of grain boundary structures in the dynamic intergranular failure of polycrystal aggregates, Comput. Methods Appl. Mech. Engrg., 362, 10.1016/j.cma.2020.112868 Gnudi, 2007, Relationship between body composition and bone mineral density in women with and without osteoporosis: relative contribution of lean and fat mass, J. Bone Miner. Metab. Vol., 25, 326, 10.1007/s00774-007-0758-8 Granke, 2011, Change in porosity is the major determinant of the variation of cortical bone elasticity at the millimeter scale in aged women, Bone, 49, 1020, 10.1016/j.bone.2011.08.002 Hamed, 2010, Multiscale modeling of elastic properties of cortical bone, Acta Mech., 213, 131, 10.1007/s00707-010-0326-5 Hang, 2011, Nano-mechanical properties of individual mineralized collagen fibrils from bone tissue, J. R. Soc. Interface, 8, 500, 10.1098/rsif.2010.0413 Hellmich, 2007, Micromechanics-based conversion of CT data into anisotropic elasticity tensors, applied to FE simulations of a mandible, Ann. Biomed. Eng., 36, 108, 10.1007/s10439-007-9393-8 Hellmich, 2004, Can the diverse elastic properties of trabecular and cortical bone be attributed to only a few tissue-independent phase properties and their interactions?, Biomech. Model. Mechanobiol., 2, 219, 10.1007/s10237-004-0040-0 Hesse, 2014, Alterations of mass density and 3D osteocyte lacunar properties in bisphosphonate-related osteonecrotic human jaw bone, a synchrotron μ CT study, PLoS ONE, 9, 10.1371/journal.pone.0088481 Hesse, 2014, Canalicular network morphology is the major determinant of the spatial distribution of mass density in human bone tissue: Evidence by means of synchrotron radiation phase-contrast nano-CT, Bone Rep., 30, 346 Hesse, 2014, Canalicular network morphology is the major determinant of the spatial distribution of mass density in human bone tissue: evidence by means of synchrotron radiation phase-contrast nano-CT, J. Bone Miner. Res., 30, 346, 10.1002/jbmr.2324 Hill, 1952, The elastic behavior of crystalline aggregate, Proc. Phys. Soc., 65, 349, 10.1088/0370-1298/65/5/307 Hill, 1963, Elastic properties of reinforced solids: Some theoretical principles, J. Mech. Phys. Solids, 11, 357, 10.1016/0022-5096(63)90036-X Hominga, J., McCreadie, B.R., Ciarelli, T.E., Weinans, H., Goldstein, S.A., Huiskes, R., 2002. Cancellous bone mechanical properties from normals and patients with hip fractures differ on the structure level, not on the bone hard tissue level. 30 (5), 759–764. http://dx.doi.org/10.1016/s8756-3282(02)00693-2. Homminga, 2003, The dependence of the elastic properties of osteoporotic cancellous bone on volume fraction and fabric, J. Biomech., 36, 1461, 10.1016/S0021-9290(03)00125-8 Johnell, 2006, An estimate of the worldwide prevalence and disability associated with osteoporotic fractures, Osteoporos. Int., 17, 1726, 10.1007/s00198-006-0172-4 Kanis, 2007 Kikinis, 2014, 3D Slicer: A platform for subject-specific image analysis, visualization, and clinical support, 277 Knowles, 2016, Quantitative Computed Tomography (QCT) derived Bone Mineral Density (BMD) in finite element studies: a review of the literature, J. Exp. Orthop., 3, 36, 10.1186/s40634-016-0072-2 Korsa, 2010, Elastic properties of human osteon and osteonal lamella computed by a bidirectional micromechanical model and validated by nanoindentation, J. Biomech. Eng., 137 Lekhnitskii, 1981, 66 Liu, 2016, Hierarchical structures of bone and bioinspired bone tissue engineering, Mater. Views, 34, 4611 Liu, 2018, A network meta-analysis on the short-term efficacy and adverse events of different anti-osteoporosis drugs for the treatment of postmenopausal osteoporosis, J. Cell. Biochem., 119, 4469, 10.1002/jcb.26550 Luisier, 2014, Orthotropic HR-pQCT-based FE models improve strength predictions for stance but not for side-way fall loading compared to isotropic QCT-based FE models of human femurs, J. Mech. Behav. Biomed. Mater., 32, 287, 10.1016/j.jmbbm.2014.01.006 Maggiano, 2009, Confocal laser scanning microscopy: a flexible tool for simultaneous polarization and three-dimensional fluorescence imaging of archaeological compact bone, J. Archaeol. Sci., 36, 2392, 10.1016/j.jas.2009.06.021 McCarthy, 1990, Ultrasound speed in equine cortical bone: Effects of orientation, density, porosity and temperature, J. Biomech., 23, 1139, 10.1016/0021-9290(90)90006-O McNally, 2012, A model for the ultrastructure of bone based on electron microscopy of ion-milled sections, PLoS ONE, 7, 10.1371/journal.pone.0029258 Mente, 1989, Experimental method for the measurment of the elastic modulus of trabecular bone tissue, J. Orthop. Res., 7, 456, 10.1002/jor.1100070320 Milazzo, 2021, Molecular origin of viscoelasticity in mineralized collagen fibrils, Biomater. Sci., 9, 3390, 10.1039/D0BM02003F Mirzaali, 2016, Mechanical properties of cortical bone and their relationships with age, gender, composition and microindentation properties in the elderly, Bone, 93, 196, 10.1016/j.bone.2015.11.018 Müller, 2019, Analysis of microscopic bone properties in an osteoporotic sheep model: a combined biomechanics, FE and ToF-SIMS study, J. R. Soc. Interface, 16, 10.1098/rsif.2018.0793 Nair, 2013, Molecular mechanics of mineralized collagen fibrils in bone, Nature Commun., 4, 1724, 10.1038/ncomms2720 Palanca, 2016 Podshivalov, 2014, On the road to personalized medicine: multiscale computational modeling of bone tissue, Arch. Comput. Methods Eng., 21, 399, 10.1007/s11831-014-9120-1 Prada, 2018, 3D boundary element meshing for multiscale bone anisotropic analysis, Eur. J. Comput. Mech., 27, 425 Reiser, 2013 Reznikov, 2018, Fractal-like hierarchical organization of bone begins at the nanoscale, Science, 360, eaao2189, 10.1126/science.aao2189 Reznikov, 2016, A materials science vision of extracellular matrix mineralization, Nat. Rev. Mater., 1, 16041, 10.1038/natrevmats.2016.41 Rho, 1995, Relations of mechanical properties to density and CT numbers in human bone, Med. Eng. Phys., 17, 347, 10.1016/1350-4533(95)97314-F Rho, 1998, Mechanical properties and the hierarchical structure of bone, Med. Eng. Phys., 20, 92, 10.1016/S1350-4533(98)00007-1 Rho, 1997, Elastic properties of human cortical and trabecular lamellar bone measured by nanoindentation, Biomaterials, 18, 1325, 10.1016/S0142-9612(97)00073-2 Rohatgi, 2018 Sabet, 2016, Modelling of bone fracture and strength at different length scales: a review, Interface Focus, 6, 10.1098/rsfs.2015.0055 San Antonio, 2012, Orientation of orthotropic material properties in a femur FE model: A method based on the principal stresses directions, Med. Eng. Phys., 34, 914, 10.1016/j.medengphy.2011.10.008 Schaffler, 1988, Stiffness of compact bone: Effects of porosity and density, J. Biomech., 21, 13, 10.1016/0021-9290(88)90186-8 Taghizadeh, 2016, Biomechanical role of bone anisotropy estimated on clinical CT scans by image registration, Ann. Biomed. Eng., 44, 2505, 10.1007/s10439-016-1551-4 Tamim Diab, 2007, Morphology, localization and accumulation of in vivo microdamage in Human cortical bone, Bone, 40, 612, 10.1016/j.bone.2006.09.027 Tamminen, 2011, Reproducibility and agreement of micro-CT and histomorphometry in human trabecular bone with different metabolic status, J. Bone Miner. Metab., 29, 442, 10.1007/s00774-010-0236-6 Tozzi, 2017, Strain uncertainties from two digital volume correlation approaches in prophylactically augmented vertebrae: Local analysis on bone and cement-bone microstructures, J. Mech. Behav. Biomed. Mater., 67, 117, 10.1016/j.jmbbm.2016.12.006 Ulrich, 1998, Finite element analysis of trabecular bone structure: a comparison of image-based meshing techniques, J. Biomech., 31, 1187, 10.1016/S0021-9290(98)00118-3 Vaughana, 2012, A three-scale fnite element investigation into the effects of tissue mineralisation and lamellar organisation in human cortical and trabecular bone, J. Mech. Behav. Biomed. Mater., 12, 50, 10.1016/j.jmbbm.2012.03.003 Vuong, 2011, Bone fibrillogenesis and mineralization: Quantitative analysis and implications for tissue elasticity, J. Theoret. Biol., 287, 115, 10.1016/j.jtbi.2011.07.028 Weiner, 1998, The material bone: Structure-mechanical function relations, Annu. Rev. Mater. Sci., 28, 271, 10.1146/annurev.matsci.28.1.271 Yoder, 2011, Structural water in carbonated hydroxylapatite and fluorapatite: confirmation by solid state (2)H NMR, Calcif. Tissue Int., 90, 60, 10.1007/s00223-011-9542-9 Yoon, 2008, The estimated elastic constants for a single bone osteonal lamella, Biomech. Model. Mechanobiol., 7, 1, 10.1007/s10237-006-0072-8 Zhang, 2007, Effect of the structural water on the mechanical properties of collagen-like microfibrils: A molecular dynamics study, Ann. Biomed. Eng., 35, 1216, 10.1007/s10439-007-9296-8 Zohdi, 2005, vol. 20, 45