Multiparameter structural optimization using FEM and multipoint explicit approximations
Tóm tắt
A unified approach to various problems of structural optimization, based on approximation concepts, is presented. The approach is concerned with the development of the iterative technique, which uses in each iteration the information gained at several previous design points (multipoint approximations) in order to better fit constraints and/or objective functions and to reduce the total number of FE analyses needed to solve the optimization problem. In each iteration, the subregion of the initial region in the space of design variables, defined by move limits, is chosen. In this subregion, several points (designs) are selected, for which response analyses and design sensitivity analyses are carried out using FEM. The explicit expressions are formulated using the weighted least-squares method. The explicit expressions obtained then replace initial problem functions. They are used as functions of a particular mathematical programming problem. Several particular forms of the explicit expressions are considered. The basic features of the presented approximations are shown by means of classical test examples, and the method is compared with other optimization techniques.
Tài liệu tham khảo
Barthelemy, B.; Haftka, R.T. 1988: Accuracy analysis of the semi-analytical method for shape sensitivity calculation.Proc. AIAA/ASME/ASCE/AHS/ASC 29th Structures, Structural Dynamics and Materials Conf. (held in Williamsburg, VA), Part 1, pp. 572–581
Brown, R.T.; Nachlas, J.A. 1981: Structural optimization of laminated conical shells. In: Marshall, I.H. (ed.)Composite structures, pp. 144–157. Amsterdam: Elsevier
Draper, N.R.; Smith, H. 1981:Applied regression analysis (2nd ed.). New York: John Wiley & Sons
Fadel, G.M.; Riley, M.F.; Barthelemy, J.M. 1990: Two point exponential approximation method for structural optimization.Struct. Optim. 2, 117–124
Fleury, C. 1989: First and second order convex approximation strategies in structural optimization.Struct. Optim. 1, 3–10
Fleury, C. 1989: CONLIN: An efficient dual optimizer based on convex approximation concepts.Struct. Optim. 1, 81–89
Fleury, C.; Braibant, V. 1986: Structural optimization: a new dual method using mixed variables.Int. J. Num. Meth. Eng. 23, 409–428
Haftka, R.T.; Nachlas, J.A.; Watson, L.T.; Rizzo, T.; Desai, R. 1987: Two-point constraint approximation in structural optimization.Comp. Meth. Appl. Eng. 60, 289–301
Ljung, L. 1987:Systems identification: theory for the user. Englewood Cliffs: Prentice Hall
Malkov, V.P.; Toropov, V.V.; Filatov, A.A. 1982: Simulation approach to optimization of deformable systems.Applied problems of strength and plasticity, pp. 62–69. Gorky University (in Russian)
Malkov, V.P.; Toropov, V.V. 1990: Simulation approach to structural optimization using design sensitivity analysis. In: Eschenauer, H.A.; Mattheck, C.; Olhoff, N. (eds.)Engineering optimization in design processes, pp. 225–231. Berlin, Heidelberg, New York: Springer
Morozov, V.D. 1987: Optimization of elastic structures based on approximation by homogeneous functions. In:Applied problems of strength and plasticity, pp. 9–21. Gorky University (in Russian)
Müller, G.; Tiefenthaler, P. 1990: Design optimization with a commercial finite element program. In: Eschenauer, H.A.; Mattheck, C.; Olhoff, N. (eds.)Engineering optimization in design processes, pp. 201–210. Berlin, Heidelberg, New York: Springer
Pedersen, P. 1981: The integrated approach of FEM-SLP for solving problems of optimal design. In: Haug, E.J.; Cea, J. (eds.)Optimization of distributed parameter structures, pp. 739–756. Amsterdam: Sijthoff and Noordhoff
Pedersen, P.; Cheng, G.; Rasmussen, J. 1989: On accuracy problems for semi-analytical sensitivity analysis.Mech. Struct. Mach. 17, 373–384
Prasad, B. 1984: Novel concepts for constraint treatment and approximations in efficient structural synthesis.AIAA J. 22, 957–966
Rasmussen, J. 1990: Structural optimization by accumulated function approximation.Int. J. Num. Meth. Eng. (submitted)
Schmit, L.A.; Farshi, B. 1974: Some approximation concepts for structural synthesis.AIAA J. 12, 692–699
Schmit, L.A.; Fleury, C. 1980: Structural synthesis by combining approximation concepts and dual methods.AIAA J. 18, 1252–1260
Schoofs, A.J.G. 1987:Experimental design and structural optimization. Doctoral Dissertation, Technical University of Eindhoven
Svanberg, K. 1987: The method of moving asymptotes — a new method for structural optimization.Int. J. Num. Meth. Eng. 24, 359–373
Toropov, V.V. 1989: Simulation approach to structural optimization.Struct. Optim. 1, 37–46
Vanderplaats, G.N. 1979: Efficient algorithm for numerical airfoil optimization.AIAA J. Aircaft 16, 842–847
Vanderplaats, G.N. 1989: Effective use of numerical optimization in structural design.Finite Elements in Analysis and Design 6, 97–112