Multifactor performance analysis of reversible solid oxide cells based on proton-conducting electrolytes

Kirschke, 2013, Three decades of global methane sources and sinks, Nat Geosci, 6, 813, 10.1038/ngeo1955 Jiang, 2019, Research on the peak of CO2 emissions in the developing world: current progress and future prospect, Appl Energy, 235, 186, 10.1016/j.apenergy.2018.10.089 UNFCCC, COP21 final draft; 2015. <https://unfccc.int/resource/docs/2015/cop21/eng/da02.pdf>. Mendiara, 2018, Negative CO2 emissions through the use of biofuels in chemical looping technology: a review, Appl Energy, 232, 657, 10.1016/j.apenergy.2018.09.201 Gradisher, 2015, Catalytic hydrogen production from fossil fuels via the water gas shift reaction, Appl Energy, 139, 335, 10.1016/j.apenergy.2014.10.080 Braungardt, 2019, Fossil fuel divestment and climate change: reviewing contested arguments, Energy Res Soc Sci, 50, 191, 10.1016/j.erss.2018.12.004 Scarlat, 2018, Biogas: developments and perspectives in Europe, Renew Energy, 129, 457, 10.1016/j.renene.2018.03.006 Bloess, 2018, Power-to-heat for renewable energy integration: a review of technologies, modeling approaches, and flexibility potentials, Appl Energy, 212, 1611, 10.1016/j.apenergy.2017.12.073 Frank, 2018, Bypassing renewable variability with a reversible solid oxide cell plant, Appl Energy, 217, 101, 10.1016/j.apenergy.2018.02.115 Zhang, 2017, Electrochemical reduction of CO2 in solid oxide electrolysis cells, J Energy Chem, 26, 593, 10.1016/j.jechem.2017.04.004 Gómez, 2016, Current developments in reversible solid oxide fuel cells, Renew Sustain Energy Rev, 61, 155, 10.1016/j.rser.2016.03.005 Ruis-Morales, 2011, Symmetric and reversible solid oxide fuel cells, RSC Adv, 1, 1403, 10.1039/c1ra00284h Jiang, 2016, Challenges in the development of reversible solid oxide cell technologies: a mini review, Asia-Pac J Chem Eng, 11, 386, 10.1002/apj.1987 Fan, 2018, Nanomaterials and technologies for low temperature solid oxide fuel cells: recent advances, challenges and opportunities, Nano Energy, 45, 148, 10.1016/j.nanoen.2017.12.044 Abdalla, 2018, Nanomaterials for solid oxide fuel cells: A review, Renew Sustain Energy Rev, 82, 353, 10.1016/j.rser.2017.09.046 Zhang, 2017, Recent progress on advanced materials for solid-oxide fuel cells operating below 500 °C, Adv Mater, 29, 1700132, 10.1002/adma.201700132 Sunarso, 2017, Perovskite oxides applications in high temperature oxygen separation, solid oxide fuel cell and membrane reactor: a review, Prog Energy Combust Sci, 61, 57, 10.1016/j.pecs.2017.03.003 Kan, 2016, Trends in electrode development for next generation solid oxide fuel cells, J Mater Chem, A4, 17913, 10.1039/C6TA06757C Onn, 2018, Atomic layer deposition on porous materials: problems with conventional approaches to catalyst and fuel cell electrode preparation, Inorganics, 6, 34, 10.3390/inorganics6010034 Hedayat, 2017, Review on fabrication techniques for porous electrodes of solid oxide fuel cells by sacrificial template methods, Renew Sustain Energy Rev, 77, 1221, 10.1016/j.rser.2017.03.095 Li, 2017, Controlling cation segregation in perovskite-based electrodes for high electro-catalytic activity and durability, Chem Soc Rev, 46, 6345, 10.1039/C7CS00120G Li, 2016, Design of highly stable and selective core/yolk–shell nanocatalysts – a review, Appl Catal B: Environ, 188, 324, 10.1016/j.apcatb.2016.01.067 Shri Prakash, 2018, Electrolyte bi-layering strategy to improve the performance of an intermediate temperature solid oxide fuel cell: a review, J Power Sources, 381, 136, 10.1016/j.jpowsour.2018.02.003 Singh, 2017, Low temperature solid oxide electrolytes (LT-SOE): a review, J Power Sources, 339, 103, 10.1016/j.jpowsour.2016.11.019 Morales, 2016, A review of doped lanthanum gallates as electrolytes for intermediate temperature solid oxides fuel cells: from materials processing to electrical and thermo-mechanical properties, J Eur Ceram Soc, 36, 1, 10.1016/j.jeurceramsoc.2015.09.025 Iwahara, 1981, Proton conduction in sintered oxides and its application to steam electrolysis for hydrogen production, Solid State Ion, 3–4, 359, 10.1016/0167-2738(81)90113-2 Iwahara, 1982, High temperature fuel and steam electrolysis cells using proton conductive solid electrolytes, J Power Sources, 7, 293, 10.1016/0378-7753(82)80018-9 Hossain, 2017, A review on proton conducting electrolytes for clean energy and intermediate temperature-solid oxide fuel cells, Renew Sustain Energy Rev, 79, 750, 10.1016/j.rser.2017.05.147 Kochetova, 2016, Recent activity in the development of proton-conducting oxides for high-temperature applications, RSC Adv, 6, 73222, 10.1039/C6RA13347A Kreuer, 1997, On the development of proton conducting materials for technological applications, Solid State Ion, 97, 1, 10.1016/S0167-2738(97)00082-9 Colomban, 2013, Proton and Protonic Species: The hidden face of solid state chemistry. How to measure H-content in materials, Fuel Cells, 13, 6, 10.1002/fuce.201200088 Volkov, 2017, Design and applications of potentiometric sensors based on proton-conducting ceramic materials. A brief review, Sens Actuat B: Chem, 244, 1004, 10.1016/j.snb.2017.01.097 Choi, 2019, Electrochemical analysis of high-performance protonic ceramic fuel cells based on a columnar-structured thin electrolyte, Appl Energy, 233–234, 29, 10.1016/j.apenergy.2018.10.043 Duan, 2015, Readily processed protonic ceramic fuel cells with high performance at low temperatures, Science, 349, 1321, 10.1126/science.aab3987 Bae, 2017, Demonstrating the potential of yttrium-doped barium zirconate electrolyte for high-performance fuel cells, Nat Commun, 8, 14553, 10.1038/ncomms14553 Choi, 2018, Exceptional power density and stability at intermediate temperatures in protonic ceramic fuel cells, Nat Energy, 3, 202, 10.1038/s41560-017-0085-9 Huan, 2018, New, efficient, and reliable air electrode material for proton-conducting reversible solid oxide cells, ACS Appl Mater Interfaces, 10, 1761, 10.1021/acsami.7b16703 He, 2010, Electrode performance and analysis of reversible solid oxide fuel cells with proton conducting electrolyte of BaCe0.5Zr0.3Y0.2O3–δ, J Power Sources, 195, 3359, 10.1016/j.jpowsour.2009.12.079 Gan, 2012, Composite oxygen electrode based on LSCM for steam electrolysis in a proton conducting solid oxide electrolyzer, J Electrochem Soc, 159, F763, 10.1149/2.018212jes Babiniec, 2015, Characterisation of ionic transport through BaCe0.2Zr0.7Y0.1O3−δ membranes in galvanic and electrolytic operation, Int J Hydrogen Energy, 40, 9278, 10.1016/j.ijhydene.2015.05.162 Yang, 2009, Enhanced sulfur and coking tolerance of a mixed ion conductor for SOFCs: BaZr0.1Ce0.7Y0.2–xYbxO3–δ, Science, 326, 126, 10.1126/science.1174811 Shi, 2014, Synthesis and characterisation of BaZr0.3Ce0.5Y0.2–xYbxO3–δ proton conductor for solid oxide fuel cells, J Power Sources, 245, 953, 10.1016/j.jpowsour.2013.07.060 Lyagaeva, 2017, BaCe0.5Zr0.3Y0.2–xYbxO3–δ proton-conducting electrolytes for intermediate-temperature solid oxide fuel cells, Electrochim Acta, 251, 554, 10.1016/j.electacta.2017.08.149 Khan, 2017, Robust doped BaCeO3–δ electrolyte for IT-SOFCs, Ionics, 23, 2387, 10.1007/s11581-017-2086-x Sadykov, 2018, Oxygen transport properties of Ca-doped Pr2NiO4, Solid State Ionics, 317, 234, 10.1016/j.ssi.2018.01.035 Sadykov, 2018, Transport features in layered nickelates: correlation between structure, oxygen diffusion, electrical and electrochemical properties, Ionics, 24, 1181, 10.1007/s11581-017-2279-3 Lyagaeva, 2017, A detailed analysis of thermal and chemical compatibility of cathode materials suitable for BaCe0.8Y0.2O3–δ and BaZr0.8Y0.2O3–δ proton electrolytes for solid oxide fuel cell application, Int J Hydrogen Energy, 42, 1715, 10.1016/j.ijhydene.2016.07.248 Pikalova, 2017, Structure, stability, and thermomechanical properties of Ca-substituted Pr2NiO4+δ, Phys Solid State, 59, 694, 10.1134/S1063783417040187 <http://www.ihte.uran.ru/?page_id=3154>. Medvedev, 2016, A tape calendering method as an effective way for the preparation of proton ceramic fuel cells with enhanced performance, Electrochim Acta, 210, 681, 10.1016/j.electacta.2016.05.197 Medvedev, 2014, BaCeO3: materials development, properties and application, Prog Mater Sci, 60, 72, 10.1016/j.pmatsci.2013.08.001 Yang, 2018, Electrochemical performance and stability of cobalt-free Ln1.2Sr0.8NiO4 (Ln = La and Pr) air electrodes for proton-conducting reversible solid oxide cells, Electrochim Acta, 267, 269, 10.1016/j.electacta.2018.02.053 Stoynov, 2018, Differential analysis of SOFC current-voltage characteristics, Appl Energy, 228, 1584, 10.1016/j.apenergy.2018.06.138 O’Hayre, 2006 Bove, 2008 Ji, 2011, Three dimensional representations of partial ionic and electronic conductivity based on defect structure analysis of BaZr0.85Y0.15O3−δ, Solid State Ion, 203, 9, 10.1016/j.ssi.2011.09.016 Heras-Juaristi, 2017, Temperature dependence of partial conductivities of the BaZr0.7Ce0.2Y0.1O3–δ proton conductor, J Power Sources, 364, 52, 10.1016/j.jpowsour.2017.08.011 Strandbakke, 2015, Gd- and Pr-based double perovskite cobaltites as oxygen electrodes for proton ceramic fuel cells and electrolyser cells, Solid State Ion, 278, 120, 10.1016/j.ssi.2015.05.014 Tian, 2018, Direct electrolysis of CO2 in symmetrical solid oxide electrolysis cell based on La0.6Sr0.4Fe0.8Ni0.2O3–δ electrode, J Electrochem Soc, 165, F17, 10.1149/2.0351802jes Nasani, 2015, Fabrication and electrochemical performance of a stable, anode supported thin BaCe0.4Zr0.4Y0.2O3–δ electrolyte protonic ceramic fuel cell, J Power Sources, 278, 582, 10.1016/j.jpowsour.2014.12.124 Hou, 2014, A new cobalt-free proton-blocking composite cathode La2NiO4+δ – LaNi0.6Fe0.4O3–δ for BaZr0.1Ce0.7Y0.2O3–δ-based solid oxide fuel cells, J Power Sources, 264, 67, 10.1016/j.jpowsour.2014.04.089 Wang, 2018, Gas humidification impact on the properties and performance of perovskite-type functional materials in proton-conducting solid oxide cells, Adv Funct Mater, 28, 1802592, 10.1002/adfm.201802592 Gong, 2017, Ce0.8Sm0.2O1.9 decorated with electron-blocking acceptor-doped BaCeO3 as electrolyte for low-temperature solid oxide fuel cells, Electrochim Acta, 228, 226, 10.1016/j.electacta.2017.01.065 Sun, 2017, Electrochemical behaviors for Ag, LSCF and BSCF as oxygen electrodes for proton conducting IT-SOFC, J Electrochem Soc, 164, F3104, 10.1149/2.0121710jes Kobayashi, 2018, Analysis of the anode reaction of solid oxide electrolyzer cells with BaZr0.4Ce0.4Y0.2O3–δ electrolytes and Sm0.5Sr0.5CoO3–δ anodes, J Electrochem Soc, 165, F342, 10.1149/2.0891805jes Danilov, 2017, Affinity of YBaCo4O7+δ-based layered cobaltites with protonic conductors of cerate-zirconate family, Ceram Int, 43, 15418, 10.1016/j.ceramint.2017.08.083 Shim, 2018, Ceramics breakthrough, Nat Energy, 3, 168, 10.1038/s41560-018-0110-7 Dai, 2018, Electrochemical performance of protonic ceramic fuel cells with stable BaZrO3-based electrolyte: a mini-review, Electrochem Commun, 96, 11, 10.1016/j.elecom.2018.09.001