Multi-scale reinforcement of epoxy composites - Use of carbon fibre fabrics coated with an epoxy binder containing MWCNTs for improved interlaminar fracture resistance

Qian, 2010, Carbon nanotube-based hierarchical composites: a review, J Mater Chem, 20, 4751, 10.1039/c000041h

Wicks, 2010, Interlaminar and intralaminar reinforcement of composite laminates with aligned carbon nanotubes, Compos Sci Technol, 70, 20, 10.1016/j.compscitech.2009.09.001

Frømyr, 2012, The optimum dispersion of carbon nanotubes for epoxy nanocomposites: evolution of the particle size distribution by ultrasonic treatment, J. Nanotechnol., 2012, 1, 10.1155/2012/545930

Ma, 2010, Interfacial interaction and re-agglomeration of functionalized carbon nanotubes in epoxy composites, Carbon, 48, 1824, 10.1016/j.carbon.2010.01.028

Godara, 2009, Influence of carbon nanotube reinforcement on the processing and the mechanical behaviour of carbon fiber/epoxy composites, Carbon, 47, 2914, 10.1016/j.carbon.2009.06.039

Wilkinson, 2016, Low viscosity processing using hybrid CNT-coated silica particles to form electrically conductive epoxy resin composites, Polymer, 98, 32, 10.1016/j.polymer.2016.06.009

Gojny, 2005, Influence of nano-modification on the mechanical and electrical properties of conventional fibre-reinforced composites, Composites Part A, 36, 1525, 10.1016/j.compositesa.2005.02.007

Kepple, 2008, Improved fracture toughness of carbon fiber composite functionalized with multi walled carbon nanotubes, Carbon, 46, 2026, 10.1016/j.carbon.2008.08.010

Zhang, 2015, Improved fracture toughness and integrated damage sensing capability by spray coated CNTs on carbon fibre prepreg, Composites Part A, 70, 102, 10.1016/j.compositesa.2014.11.029

Herceg, 2016, Thermosetting hierarchical composites with high carbon nanotube loadings: en route to high performance, Compos Sci Technol, 127, 134, 10.1016/j.compscitech.2016.02.015

Liu, 2018, Rheological percolation behaviour and fracture properties of nanocomposites of MWCNTs and a highly crosslinked aerospace-grade epoxy resin system, Composites Part A, 105, 97, 10.1016/j.compositesa.2017.11.012

Aktas, 2010, Characterization of nanocomposite laminates fabricated from aqueous dispersion of nanoclay, Polym Compos, 31, 620, 10.1002/pc.20837

ASTM D5528-13 standard test method for mode I interlaminar fracture toughness of unidirectional fiber-reinforced polymer matrix composites vol. 1, 2014.

Kuwata, 2011, Interlaminar toughness of interleaved CFRP using non-woven veils: part 2. mode-II testing, Composites Part A, 42, 1560, 10.1016/j.compositesa.2011.07.017

Lomov, 2011, Compressibility of carbon woven fabrics with carbon nanotubes/nanofibres grown on the fibres, Compos Sci Technol, 71, 315, 10.1016/j.compscitech.2010.11.024

Wu, 2017, Interlaminar fracture toughness of carbon fibre/RTM6-2 composites toughened with thermoplastic-coated fabric reinforcement, Composites Part B, 130, 192, 10.1016/j.compositesb.2017.08.003

Drzal, 1983, Adhesion of graphite fibers to epoxy matrices: II: the effect of fiber finish, J Adhes, 16, 133, 10.1080/00218468308074911

Williams, 1997, Reaction-induced phase separation in modified thermosetting polymers, Adv Polym Sci, 128, 95, 10.1007/3-540-61218-1_7

Kuwata, 2011, Interlaminar toughness of interleaved CFRP using non-woven veils: part 1. mode-I testing, Composites Part A, 42, 1551, 10.1016/j.compositesa.2011.07.016

Pearson, 1993, Toughening mechanisms in thermoplastic modified epoxies: 1. modification using poly (phenylene oxide), Polymer, 34, 3658, 10.1016/0032-3861(93)90051-B

Hsieh, 2011, The effect of carbon nanotubes on the fracture toughness and fatigue performance of a thermosetting epoxy polymer, J Mater Sci, 46, 7525, 10.1007/s10853-011-5724-0

Madhukar, 1992, Fiber-matrix adhesion and its effect on composite mechanical properties: IV. Mode I and Mode II fracture toughness of graphite/epoxy composites, J Compos Mater, 26, 936, 10.1177/002199839202600701