Multi-objective optimization on mechanical properties of glass-carbon and durian skin fiber reinforced poly(lactic acid) hybrid composites using the extreme mixture design response surface methodology

Zhang, 2018, Throughthickness thermal conductivity enhancement and tensile response of carbon fiber-reinforced polymer composites, Compos. B Eng., 165, 183, 10.1016/j.compositesb.2018.11.114 Mittal, 2017, Reinforcements in multi-scale polymer composites: processing, properties, and applications, Compos. B Eng., 138, 122, 10.1016/j.compositesb.2017.11.028 Safri, 2018, Impact behaviour of hybrid composites for structural applications: a review, Compos. B Eng., 133, 112, 10.1016/j.compositesb.2017.09.008 Aslan, 2018, Tribological and mechanical performance of sisal-filled waste carbon and glass fibre hybrid composites, Compos. B Eng., 140, 241, 10.1016/j.compositesb.2017.12.039 Le, 2018, Recommended flax fibre density values for composite property predictions, Ind. Crops Prod., 114, 52, 10.1016/j.indcrop.2018.01.065 Ramesh, 2013, Mechanical property evaluation of sisaljuteglass fiber reinforced polyester composites, Compos. B Eng., 48, 1, 10.1016/j.compositesb.2012.12.004 Zhang, 2013, Tensile and interfacial properties of unidirectional flax/glass fiber reinforced hybrid composites, Compos. Sci. Technol., 88, 172, 10.1016/j.compscitech.2013.08.037 Amid, 2012, Optimisation of aqueous extraction of gum from durian (Durio zibethinus) seed: a potential, low cost source of hydrocolloid, Food Chem., 132, 1258, 10.1016/j.foodchem.2011.11.099 Manshor, 2014, Mechanical, thermal and morphological properties of durian skin fibre reinforced PLA biocomposites, Mater. Des., 59, 279, 10.1016/j.matdes.2014.02.062 Aimi, 2014, Optimizing the parameters in durian skin fiber reinforced polypropylene composites by response surface methodology, Ind. Crops Prod., 54, 291, 10.1016/j.indcrop.2014.01.016 Yu, 2015, Enhancing the thermal conductivity of carbon fiber reinforced polymer composite laminates by coating highly oriented graphite films, Mater. Des., 88, 1063, 10.1016/j.matdes.2015.09.096 Alsaadi, 2018, Effect of perlite particle contents on delamination toughness of S-glass fiber reinforced epoxy matrix composites, Compos. B Eng., 141, 182, 10.1016/j.compositesb.2017.12.059 Terzopoulou, 2015, Green composites prepared from aliphatic polyesters and bast fibers, Ind. Crops Prod., 68, 60, 10.1016/j.indcrop.2014.08.034 Pappu, 2019, Manufacturing and characterization of sustainable hybrid composites using sisal and hemp fibres as reinforcement of poly (lactic acid) via injection moulding, Ind. Crops Prod., 137, 260, 10.1016/j.indcrop.2019.05.040 Ho, 2015, Improvement on the properties of polylactic acid (PLA) using bamboo charcoal particles, Compos. B Eng., 81, 14, 10.1016/j.compositesb.2015.05.048 Tawakkal, 2014, Effect of kenaf fibre loading and thymol concentration on the mechanical and thermal properties of PLA/kenaf/thymol composites, Ind. Crops Prod., 61, 74, 10.1016/j.indcrop.2014.06.032 Muthuraj, 2019, Sustainable thermal insulation biocomposites from rice husk, wheat husk, wood fibers and textile waste fibers: Elaboration and performances evaluation, Ind. Crops Prod., 135, 238, 10.1016/j.indcrop.2019.04.053 Gamon, 2013, Twin-screw extrusion impact on natural fibre morphology and material properties in poly (lactic acid) based biocomposites, Ind. Crops Prod., 46, 173, 10.1016/j.indcrop.2013.01.026 Quiles, 2017, Compatibilization of highly sustainable polylactide/almond shell flour composites by reactive extrusion with maleinized linseed oil, Ind. Crops Prod., 111, 878, 10.1016/j.indcrop.2017.10.062 Dias, 2019, Simplex-Centroid mixture design applied to arsenic (V) removal from waters using synthetic minerals, Environ. Manag., 238, 92 Jiao, 2018, Mixture design of concrete using simplex centroid design method, Cem. Concr. Compos, 89, 76, 10.1016/j.cemconcomp.2018.03.001 Lawson, 2015 Homkhiew, 2014, The optimal formulation of recycled polypropylene/rubberwood flour composites fromexperiments with mixture design, Compos. B Eng., 56, 350, 10.1016/j.compositesb.2013.08.041 Tribot, 2018, Design of experiments for bio-based composites with lignosulfonates matrix and corn cob fibers, Ind. Crops Prod., 123, 539, 10.1016/j.indcrop.2018.07.019 da silva Alves, 2019, Optimization of metakaolin-based geopolymer reinforced with sisal fibers using response surface methology, Ind. Crops Prod., 139, 1, 10.1016/j.indcrop.2019.111551 Rostamiyan, 2014, Using response surface methodology for modeling and optimizing tensile and impact strength properties of fiber orientated quaternary hybrid nano composite, Compos. B Eng., 69, 304, 10.1016/j.compositesb.2014.09.031 Daneshpayeh, 2016, Predicting of mechanical properties of PP/LLDPE/TiO2 nano-composites by response surface methodology, Compos. B Eng., 84, 109, 10.1016/j.compositesb.2015.08.075 Ghelich, 2019, Central composite design (CCD)-Response surface methodology (RSM) of effective electrospinning parameters on PVP-B-Hf hybrid nanofibrous composites for synthesis of HfB2-based composite nanofibers, Compos. B Eng., 16, 527, 10.1016/j.compositesb.2019.01.094 2017 2014 Montgomery, 2013 2010 2008 B.F. Ryan, B.L. Joiner, J.D. Cryer, MINITAB handbook: update for release, 6th ed., Toronto: Brooks Cole; Massachusetts, 2010. Deeying, 2018, Multi-objective optimization on laser solder jet bonding process in head gimbal assembly using the response surface methodology, Opt. Laser Technol., 98, 158, 10.1016/j.optlastec.2017.07.045 Senturk, 2018, Evaluation of hybrid effect on the thermomechanical and mechanical properties of calcite/SGF/PP hybrid composites, Compos. B Eng., 140, 68, 10.1016/j.compositesb.2017.12.021 Yan, 2018, Structure and interfacial shear strength of polypropylene glass fiber/carbon fiber hybrid composites fabricated by direct fiber feeding injection molding, Compos. Struct., 185, 362, 10.1016/j.compstruct.2017.11.037 Immonen, 2017, Effects of surfactants on the preparation of nanocellulose-PLA composites, Bioengineering, 4, 91, 10.3390/bioengineering4040091 Nkomo, 2022, Optimisation of mechanical properties of polyethylene terephthalate fibre/fly ash hybrid concrete composite, Case Stud. Constr. Mater., 17 Abdulkadir, 2021, Modelling and multi-objective optimization of the fresh and mechanical properties of self-compacting high volume fly ash ECC (HVFA-ECC) using response surface methodology (RSM), Case Stud. Constr. Mater., 14 Hou, 2022, A study on influencing factors of optimum insulation thickness of exterior walls for rural traditional dwellings in northeast of Sichuan hills, China, Case Stud. Constr. Mater., 16 Yildizel, 2022, The evaluation of calcium carbonate added and basalt fiber reinforced roller compacted high performance concrete for pavement, Case Stud. Constr. Mater., 17 Saeed, 2021, Optimization of rubber seed oil content as bio-oil rejuvenator and total water content for cold recycled asphalt mixtures using response surface methodology, Case Stud. Constr. Mater., 37 Haque, 2021, Prediction and optimization of the fresh and hardened properties of concrete containing rice husk ash and glass fiber using response surface methodology, Case Stud. Constr. Mater., 14 Alaloul, 2020, Mechanical and deformation properties of rubberized engineered cementitious composite (ECC), Case Stud. Constr. Mater., 13 Chen, 2022, Effect of physical properties of construction wastes based composite photocatalysts on the sulfur dioxide degradation: experimental investigation and mechanism analysis, Case Stud. Constr. Mater., 17 Liu, 2017, Optimizing synthesis parameters of short carbon fiber reinforced polysulfonamide composites by using response surface methodology, Polymer Test., 59, 355, 10.1016/j.polymertesting.2017.02.013