Multi-objective optimization of a metal hydride reactor coupled with phase change materials for fast hydrogen sorption time

Hugo, 2005, Hydrogen infrastructure strategic planning using multi-objective optimization, Int. J. Hydrog. Energy, 30, 1523, 10.1016/j.ijhydene.2005.04.017 Züttel, 2003, Materials for hydrogen storage, Mater. Today, 6, 24, 10.1016/S1369-7021(03)00922-2 Ahluwalia, 2012, On-board and off-board performance of hydrogen storage options for light-duty vehicles, Int. J. Hydrog. Energy, 37, 2891, 10.1016/j.ijhydene.2011.05.040 Nyamsi, 2012, An optimization study on the finned tube heat exchanger used in hydride hydrogen storage system-analytical method and numerical simulation, Int. J. Hydrog. Energy, 37, 16078, 10.1016/j.ijhydene.2012.08.074 Afzal, 2017, Heat transfer techniques in metal hydride hydrogen storage: a review, Int. J. Hydrog. Energy, 42, 30661, 10.1016/j.ijhydene.2017.10.166 Zhang, 2005, A review of heat transfer issues in hydrogen storage technologies, J Heat Trans–Trans ASME, 127, 1391, 10.1115/1.2098875 Nagel, 1987, Effective thermal-conductivity of a metal hydride bed augmented with a copper wire-net matrix, Journal of Less-Common Metal, 131, 426, 10.1016/0022-5088(87)90543-1 Laurencelle, 2007, Simulation of heat transfer in a metal hydride reactor with aluminium foam, Int. J. Hydrog. Energy, 32, 2957, 10.1016/j.ijhydene.2006.12.007 Mellouli, 2009, Hydrogen storage in metal hydride tanks equipped with metal foam heat exchanger, Int. J. Hydrog. Energy, 34, 9393, 10.1016/j.ijhydene.2009.09.043 Chaise, 2009, Enhancement of hydrogen sorption in magnesium hydride using expanded natural graphite, Int. J. Hydrog. Energy, 34, 8589, 10.1016/j.ijhydene.2009.07.112 Elhamshri, 2019, Enhancement of hydrogen charging in metal hydride-based storage systems using heat pipe, Int. J. Hydrog. Energy, 44, 18927, 10.1016/j.ijhydene.2018.10.040 Chung, 2013, Experimental study on the hydrogen charge and discharge rates of metal hydride tanks using heat pipes to enhance heat transfer, Appl. Energy, 103, 581, 10.1016/j.apenergy.2012.10.024 Mohan, 2007, Performance simulation of metal hydride hydrogen storage device with embedded filters and heat exchanger tubes, Int. J. Hydrog. Energy, 32, 4978, 10.1016/j.ijhydene.2007.08.007 Wu, 2014, Magnesium based metal hydride reactor incorporating helical coil heat exchanger: simulation study and optimal design, Appl. Energy, 130, 712, 10.1016/j.apenergy.2013.12.071 Jensen, 2007, The energy efficiency of onboard hydrogen storage, J. Alloys Compd., 446–447, 723, 10.1016/j.jallcom.2007.04.051 Garrier, 2013, A new MgH2 tank concept using a phase-change material to store the heat of reaction, Int. J. Hydrog. Energy, 38, 9766, 10.1016/j.ijhydene.2013.05.026 Mellouli, 2015, Numerical analysis of metal hydride tank with phase change material, ApplThermEng, 90, 674 Darzi, 2016, Absorption and desorption of hydrogen in long metal hydride tank equipped with phase change material jacket, Int. J. Hydrog. Energy, 41, 9595, 10.1016/j.ijhydene.2016.04.051 El Mghari, 2019, Analysis of hydrogen storage performance of metal hydride reactor with phase change materials, Int. J. Hydrog. Energy, 44, 28893, 10.1016/j.ijhydene.2019.09.090 Tong, 2019, Thermal management of metal hydride hydrogen storage reservoir using phase change materials, Int. J. Hydrog. Energy, 44, 21055, 10.1016/j.ijhydene.2019.03.127 Ben Maad, 2016, Heat and mass transfer in a metal hydrogen reactor equipped with a phase-change heat-exchanger, Int J Thermal Sciences, 99, 271, 10.1016/j.ijthermalsci.2015.09.003 Ben Mâad, 2018, Numerical study of high-temperature metal-hydrogen reactor (Mg2Ni-H2) with heat reaction recovery using phase-change material during desorption, Appl. Therm. Eng., 140, 225, 10.1016/j.applthermaleng.2018.05.009 Nyamsi, 2019, Metal hydride beds-phase change materials: dual mode thermal energy storage for medium-high temperature industrial waste heat recovery, Energies, 12, 3949, 10.3390/en12203949 Miled, 2017, Improvement of the performance of metal hydride pump by using phase change heat exchanger, Int. J. Hydrog. Energy, 42, 26343, 10.1016/j.ijhydene.2017.08.118 Yao, 2020, A continuous hydrogen absorption/desorption model for metal hydride reactor coupled with PCM as heat management and its application in the fuel cell power system, Int. J. Hydrog. Energy, 45, 28087, 10.1016/j.ijhydene.2020.05.089 Ye, 2020, Numerical simulation on the storage performance of a phase change materials based metal hydride hydrogen storage tank, Appl. Energy, 278, 10.1016/j.apenergy.2020.115682 Alqahtani, 2020, Cyclic behaviors of a novel design of a metal hydride reactor encircled by cascaded phase change materials, Int. J. Hydrog. Energy, 45, 32285, 10.1016/j.ijhydene.2020.08.280 Lizana, 2017, Advances in thermal energy storage materials and their applications towards zero energy buildings: a critical review, ApplEnerg, 203, 219 Ling, 2015, Thermal conductivity of an organic phase change material/expanded graphite composite across phase change temperature range and a novel thermal conductivity model, Energy Convers. Manag., 102, 202, 10.1016/j.enconman.2014.11.040 Warzoha, 2015, Temperature-dependent thermal properties of a paraffin phase change material embedded with herringbone style graphite nanofibers, Appl. Energy, 137, 716, 10.1016/j.apenergy.2014.03.091 Chibani, 2022, Heat and mass transfer characteristics of charging in a metal hydride-phase change material reactor with nano oxide additives: the large scale-approach, Appl. Therm. Eng., 213, 10.1016/j.applthermaleng.2022.118622 Wu, 2020, Thermal conductivity enhancement on phase change materials for thermal energy storage: a review, Energy Storage Materials, 25, 251, 10.1016/j.ensm.2019.10.010 Zheng, 2018, Thermal performance of copper foam/paraffin composite phase change material, Energy Convers. Manag., 157, 372, 10.1016/j.enconman.2017.12.023 Fleming, 2015, Experimental and theoretical analysis of an aluminum foam enhanced phase change thermal storage unit, Int. J. Heat Mass Transf., 82, 273, 10.1016/j.ijheatmasstransfer.2014.11.022 Yang, 2019, Thermal response of annuli filled with metal foam for thermal energy storage: an experimental study, Appl. Energy, 250, 1457, 10.1016/j.apenergy.2019.05.096 Yang, 2017, Thermal performance of a shell-and-tube latent heat thermal energy storage unit: role of annular fins, Appl. Energy, 202, 558, 10.1016/j.apenergy.2017.05.007 Erek, 2005, Experimental and numerical investigation of thermal energy storage with a finned tube, Int. J. Energy Res., 29, 283, 10.1002/er.1057 Zhai, 2015, Experimental investigation and performance analysis of a fin tube phase change cold storage unit for high temperature cooling application, Energy Build, 89, 9, 10.1016/j.enbuild.2014.12.021 Rathod, 2015, Thermal performance enhancement of shell and tube Latent Heat Storage Unit using longitudinal fins, ApplThermEng, 75, 1084 Huang, 2020, Performance optimization of a finned shell-and-tube ice storage unit, Appl. ThermEng, 167 Zhao, 2020, Numerical study of melting performance enhancement for PCM in an annular enclosure with internal-external fins and metal foams, Int. J. Heat Mass Transf., 150, 10.1016/j.ijheatmasstransfer.2020.119348 Dhaidan, 2017, Improved performance of latent heat energy storage systems utilizing high thermal conductivity fins: a review, Journal of Renewable and Sustainable Energy, 9, 10.1063/1.4989738 Li, 2012, Experimental and numerical studies on melting phase change heat transfer in open-cell metallic foams filled with paraffin, Appl. Therm. Eng., 37, 1, 10.1016/j.applthermaleng.2011.11.001 Sharifi, 2011, Enhancement of PCM melting in enclosures with horizontally-finned internal surfaces, Int. J. Heat Mass Transf., 54, 4182, 10.1016/j.ijheatmasstransfer.2011.05.027 Tay, 2014, An effectiveness-NTU technique for characterising a finned tubes PCM system using a CFD model, Appl. Energy, 131, 377, 10.1016/j.apenergy.2014.06.041 Nyallang Nyamsi, 2022, Dehydrogenation of metal hydride reactor-phase change materials coupled with light-duty fuel cell vehicles, Energies, 15, 2982, 10.3390/en15092982 Lewis, 2021, Analysis of heat and mass transfer during charging and discharging in a metal hydride - phase change material reactor, J. Energy Storage, 33, 10.1016/j.est.2020.102108 Nyallang, 2020, Optimal design of combined two-tank latent and metal hydrides-based thermochemical heat storage systems for high-temperature waste heat recovery, Energies, 13, 4216, 10.3390/en13164216 Elarem, 2021, Numerical analysis of a built-in thermal storage system of metal hydride and nanoparticles enhanced phase change material and nanofluid, Int. J. Energy Res., 45, 5881, 10.1002/er.6209 El Mghari, 2020, Selection of phase change materials, metal foams and geometries for improving metal hydride performance, Int. J. Hydrog. Energy, 45, 14922, 10.1016/j.ijhydene.2020.03.226 Davids, 2013, Manufacturing of hydride-forming alloys from mixed titanium-iron oxide, Adv. Mater. Res., 746, 14, 10.4028/www.scientific.net/AMR.746.14 Pickering, 2018, Induction melted AB2-type metal hydrides for hydrogen storage and compression applications, Materials Today: Proceedings, 5, 10470 Ahamed, 2022, A review on the use of coconut oil as an organic phase change material with its melting process, heat transfer, and energy storage characteristics, J Thermal Analysis & Calorimetry, 147, 4451, 10.1007/s10973-021-10839-7 Bhogilla, 2017, Design of an AB2-metal hydride cylindrical tank for renewable energy storage, J Energy Storage, 14, 203, 10.1016/j.est.2017.10.012 Visaria, 2011, Enhanced heat exchanger design for hydrogen storage using high-pressure metal hydride: part 1. Design methodology and computational results. Int, J. Heat Mass Transf., 54, 413, 10.1016/j.ijheatmasstransfer.2010.09.029 Arora, 2016, Soft computing based multi-objective optimization of Brayton cycle power plant with isothermal heat addition using evolutionary algorithm and decision making, Appl.Soft Comput., 46, 267, 10.1016/j.asoc.2016.05.001 Mostafavi, 2022, Multi-objective optimization of metal hydride hydrogen storage tank with phase change material, Therm Sci. Eng. Prog., 36