Multi-objective Optimization of FSW Process Parameters of Aluminium Alloy Using Taguchi-Based Grey Relational Analysis

Nilesh Ghetiya1, Kaushik M. Patel1, A. J. Kavar1
1Department of Mechanical Engineering, Institute of Technology, Nirma University, Ahmedabad 382481, India

Tóm tắt

Từ khóa


Tài liệu tham khảo

Oosterkamp A, Oosterkamp L D, and Nordeide A, Weld J 83 (2004) 225.

Lee W B, Yeon Y M, and Jung S B, Mater Trans 45 (2004) 1700.

Rajakumar S, Muralidharan C, and Balasubramanian V, Mater Des 32 (2011) 2878.

Cavaliere P, Campanile G, Panella F, and Squillace A, J Mater Process Technol, 180 (2006) 263.

Lakshminarayanan A, and Balasubramanian V, Trans Nonferrous Met Soc China 18 (2008) 548.

Cavaliere P, Squillace A, and Panella F, J Mater Process Technol 200 (2008) 364.

Cavaliere P, Squillace A, Campanile G, and Panella F, J Mater Process Technol 108 (2006) 263.

Zhou L, Liu H J, and Liu Q W, Mater Des 31 (2010) 2631.

Karthikeyan L, and Senthil Kumar V S, Mater Des 32 (2011) 3085.

Elangovan K, and Balasubramanian V, Mater Sci Eng 459 (2007) 7.

Fujii H, Cui L, Maeda M, and Nogi K, Mater Sci Eng 419 (2006) 25.

Hirata T, Oguri T, Hagino H, Tanaka T, Chung S W, Takigawa Y, and Higashi K, Mater Sci Eng 456 (2007) 344.

Elangovan K, Balasubramanian V, and Babu S, Mater Des 30 (2009) 188.

Shanmuga Sundaram N, and Murugan N, Mater Des 31 (2010) 4184.

Okuyucu H, Kurt A, and Arcaklioglu E, Mater Des 28 (2007) 78.

Vijayan S, Raju R, and Rao S R, Mater Manuf Process 25 (2010) 1206.

Patel K M, Pandey P M, and Rao P V, Int J Adv Manuf Technol 47 (2010) 1137.

Deng J, Syst Control Lett 5 (1982) 288.

Caydas U, and Hascalik A, Opt Laser Technol 40 (2008) 987.