Multi-axial fatigue life assessment of additively manufactured nickel-based superalloys

Gibson, 2015 DebRoy, 2018, Additive manufacturing of metallic components: Process, structure and properties, Prog Mater Sci, 92, 112, 10.1016/j.pmatsci.2017.10.001 Tucho, 2017, Microstructure and hardness studies of Inconel 718 manufactured by selective laser melting before and after solution heat treatment, Mater Sci Eng A, 689, 220, 10.1016/j.msea.2017.02.062 Pei, 2019, Assessment of mechanical properties and fatigue performance of a selective laser melted nickel-base superalloy Inconel 718, Mater Sci Eng A, 759, 278, 10.1016/j.msea.2019.05.007 Pei, 2020, A damage evolution model based on micro-structural characteristics for an additive manufactured superalloy under monotonic and cyclic loading conditions, Int J Fatigue, 131, 10.1016/j.ijfatigue.2019.105279 Qian, 2022, In situ X-ray imaging of fatigue crack growth from multiple defects in additively manufactured AlSi10Mg alloy, Int J Fatigue, 155, 10.1016/j.ijfatigue.2021.106616 Balachandramurthi, 2020, On the microstructure of laser beam powder bed fusion alloy 718 and its influence on the low cycle fatigue behaviour, Materials, 13, 5198, 10.3390/ma13225198 Lewandowski, 2016, Metal additive manufacturing: A review of mechanical properties, Annu Rev Mater Res, 46, 151, 10.1146/annurev-matsci-070115-032024 Mower, 2016, Mechanical behavior of additive manufactured, powder-bed laser-fused materials, Mater Sci Eng A, 651, 198, 10.1016/j.msea.2015.10.068 Pei, 2022, Investigation on failure mechanisms and quantification of anisotropic damage evolution in a nickel-based superalloy built by additive manufacturing, Eng Fract Mech, 10.1016/j.engfracmech.2022.108450 Zhang, 2021, Microstructural characterization and fatigue performance of the recasting material induced by laser manufacturing of a nickel-based superalloy, J Mater Process Technol, 293, 10.1016/j.jmatprotec.2021.117087 Gu, 2012, Laser additive manufacturing of metallic components: Materials, processes and mechanisms, Int Mater Rev, 57, 133, 10.1179/1743280411Y.0000000014 Ni, 2017, Anisotropic tensile behavior of in situ precipitation strengthened Inconel 718 fabricated by additive manufacturing, Mater Sci Eng A, 70, 344, 10.1016/j.msea.2017.06.098 Yadollahi, 2017, Effects of building orientation and heat treatment on fatigue behavior of selective laser melted 17-4 PH stainless steel, Int J Fatigue, 94, 218, 10.1016/j.ijfatigue.2016.03.014 Brunarosso, 2018, Selective laser melting finite element modeling: Validation with high-speed imaging and lack of fusion defects prediction, Mater Des, 156, 143, 10.1016/j.matdes.2018.06.037 Kuo, 2017, Effects of build direction and heat treatment on creep properties of Ni-base superalloy built up by additive manufacturing, Scr Mater, 129, 74, 10.1016/j.scriptamat.2016.10.035 Jin, 2022, Anisotropic cyclic plasticity modeling for additively manufactured nickel-based superalloys, Fatigue Fract Eng Mater Struct, 10.1111/ffe.13752 King, 2015, Laser powder bed fusion additive manufacturing of metals; physics, computational, and materials challenges, Appl Phys Rev, 2, 10.1063/1.4937809 Brandl, 2012, Additive manufactured AlSi10Mg samples using selective laser melting (SLM): Microstructure, high cycle fatigue, and fracture behavior, Mater Des, 34, 159, 10.1016/j.matdes.2011.07.067 Dinda, 2009, Laser aided direct metal deposition of Inconel 625 superalloy: Microstructural evolution and thermal stability, Mater Sci Eng A, 509, 98, 10.1016/j.msea.2009.01.009 Zhang, 2015, Effect of standard heat treatment on the microstructure and mechanical properties of selective laser melting manufactured Inconel 718 superalloy, Mater Sci Eng A, 644, 32, 10.1016/j.msea.2015.06.021 Wang, 2012, The microstructure and mechanical properties of deposited-IN718 by selective laser melting, J Alloy Compd, 513, 518, 10.1016/j.jallcom.2011.10.107 Xiao, 2017, Effects of laser modes on Nb segregation and laves phase formation during laser additive manufacturing of nickel-based superalloy, Mater Lett, 188, 260, 10.1016/j.matlet.2016.10.118 Idell, 2016, Unexpected phase formation in additive-manufactured Ni-based superalloy, JOM, 68, 950, 10.1007/s11837-015-1772-2 Mostafa, 2017, Structure, texture and phases in 3D printed IN718 alloy subjected to homogenization and HIP treatments, Metals, 7, 196, 10.3390/met7060196 Tucho, 2019, Characterization of SLM-fabricated Inconel 718 after solid solution and precipitation hardening heat treatments, J Mater Sci, 54, 823, 10.1007/s10853-018-2851-x Tillmann, 2017, Hot isostatic pressing of IN718 components manufactured by selective laser melting, Addit Manuf, 13, 93 Schneider, 2018, Effect of heat treatment variations on the mechanical properties of Inconel 718 selective laser melted specimens, Addit Manuf, 21, 248 Chlebus, 2015, Effect of heat treatment on the microstructure and mechanical properties of Inconel 718 processed by selective laser melting, Mater Sci Eng A, 639, 647, 10.1016/j.msea.2015.05.035 Zhang, 2018, Comparison of microstructures and mechanical properties of Inconel 718 alloy processed by selective laser melting and casting, Mater Sci Eng A, 724, 357, 10.1016/j.msea.2018.03.073 Mahobia, 2014, Effect of hot corrosion on low cycle fatigue behavior of superalloy IN718, Int J Fatigue, 59, 272, 10.1016/j.ijfatigue.2013.08.009 Chen, 2016, Low cycle fatigue and creep-fatigue interaction behavior of nickel-base superalloy GH4169 at elevated temperature of 650 °C, Mater Sci Eng A, 655, 175, 10.1016/j.msea.2015.12.096 Sun, 2019, Life assessment of multiaxial thermomechanical fatigue of a nickel-based superalloy Inconel 718, Int J Fatigue, 120, 228, 10.1016/j.ijfatigue.2018.11.018 Sun, 2020, Thermal gradient mechanical fatigue assessment of a nickel-based superalloy, Int J Fatigue, 135, 10.1016/j.ijfatigue.2020.105486 Klopp, 1999 Kim, 1988 Nelson, 1992 Ma, 2017, Multiaxial fatigue life assessment of sintered porous iron under proportional and non-proportional loadings, Int J Fatigue, 97, 214, 10.1016/j.ijfatigue.2017.01.005 Sarkar, 2019, Effects of heat treatment and build orientations on the fatigue life of selective laser melted 15-5 PH stainless steel, Mater Sci Eng A, 755, 235, 10.1016/j.msea.2019.04.003 Stern, 2019, Investigation of the anisotropic cyclic damage behavior of selective laser melted AISI 316L stainless steel, Fatigue Fract Eng Mater Struct, 42, 2422, 10.1111/ffe.13029 Sun, 2020, Effects of build direction on tensile and fatigue performance of selective laser melting Ti6Al4V titanium alloy, Int J Fatigue, 130, 10.1016/j.ijfatigue.2019.105260 Qian, 2020, In-situ investigation on fatigue behaviors of Ti-6Al-4V manufactured by selective laser melting, Int J Fatigue, 133, 10.1016/j.ijfatigue.2019.105424 Hu, 2020, On the fatigue crack growth behaviour of selective laser melting fabricated Inconel 625: Effects of build orientation and stress ratio, Fatigue Fract Eng Mater Struct, 43, 771, 10.1111/ffe.13181 Wu, 2022, Study on fatigue crack growth behavior of selective laser-melted Ti6Al4V under different build directions, stress ratios, and temperatures, Fatigue Fract Eng Mater Struct, 1 Molaei, 2020, Fatigue of additive manufactured Ti-6Al-4V, Part II: The relationship between microstructure, material cyclic properties, and component performance, Int J Fatigue, 132, 10.1016/j.ijfatigue.2019.105363 ASTM Standard, 2014 ThyssenKrupp, 2012 ASTM Standard, 2015 Calandri, 2018, Solution treatment study of Inconel 718 produced by SLM additive technique in view of the oxidation resistance, Adv Eng Mater, 20, 10.1002/adem.201800351 Stephens, 2000 Popovich, 2017, Impact of heat treatment on mechanical behaviour of Inconel 718 processed with tailored microstructure by selective laser melting, Mater Des, 131, 12, 10.1016/j.matdes.2017.05.065 Sun, 2019, Cyclic plasticity modeling of nickel-based superalloy Inconel 718 under multi-axial thermo-mechanical fatigue loading conditions int, J Fatigue, 119, 89, 10.1016/j.ijfatigue.2018.09.017 Brinkman, 1974, Strain fatigue and tensile behavior of Inconel® 718 from room temperature to 650 °C, J Test Eval Si, 1983, Stress intensity factors for edge cracks in round bars, Eng Fract Mech, 37, 805 Kolts, 1996 Socie, 2000 Fatemi, 1988, A critical plane approach to multiaxial fatigue damage including out-of-phase loading, Fatigue Fract Eng Mater Struct, 11, 149, 10.1111/j.1460-2695.1988.tb01169.x Liu, 1993, A method based on virtual strain–energy parameters for multiaxial fatigue life prediction, 67 Chu, 1993, Multiaxial stress–strain modeling and fatigue life prediction of SAE axle shafts, 37